I have problems using the new adobe flash update that I just downloaded.
Some sites are not allowing me access to what I download the most recent update for adobe flash. So I did, but afterwards, the websites are not recognizing that I have. I didn't know if it was you or the other Web sites. haha I'd really prefer not to start using chrome so please help if possible.
Well Chrome is a good browser.
After you closed Firefox and ran the update, it then should have finished and opened the default browser to the Adobe web site that has a spinning box, this will say you are up to date. Did this happen for you. If so then I would check Windows list of installed program and see if you have flash and see if that date corresponds with the day you updated. The version number should be 10.3.183.7
Tags: Firefox
Similar Questions
-
How do we change privalages
I am trying to intall the new adobe flash but its not allowing and continues to tell me I don't have enough privaleges for add this... even though I am the administrator on the computer?Hello Victor,.
Try to run the Setup file of Adobe Flash Player as an administrator by following the instructions in this article: -
I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?
Have you followed all the steps like that?
It is an alternative.
http://explore.live.com/Windows-Live-Family-Safety?OS=other
http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety
If this post answers your question, click mark as answer .
-
If ever I would restore my previous settings it works then return as ask I install the new flash player from adobe on a lost again.am as to what needs to be done. Thank you
There are many possible problems. Go to http://kb2.adobe.com/cps/191/tn_19166.html for a long list of potential problems and steps to check for them and correct them.
-
By using the new adobe reader software.
Hello
I downloaded your latest version of the free adobe reader today.
It works fine until I try to print my document... the button 'print' the context Editor is
hiding UNDER my bottom taskbar, which I can't move. The editor of pop-up windows cannot be moved above, either, nor can I decline
the size of the editor to join the print button. So, how in the world can print my bank statements format Adobe? It's frustrating!
Please advise... I have taxes to work on and MUST have copies of my bank statements.
I live at the British Colombia Canada, [personal information deleted by Moderator]
I'd appreciate more greatly help solve this problem.
Theresa Günster
Hi Theresa,
The screen resolution supported from Acrobat/Reader 11.0 is 1024 x 768. However, we have provided a scroller on the right side of the dialog box so that you can access the OK button.
Incase, the scrollbar on the right side is not visible, you can simply use the "Enter" button to print your documents.
Thank you
Atul Agarwal
-
Printing problems using the new premium photo paper more HP
Unable to get the recent HP Premium Plus photo paper to print in my Photosmart always reliable 4780... tried to print using today our new of OfficeJet Pro 8600 and it would print in it either. This paper feels very different to me, and it seems that the paper is too smooth to be taken over by the printer. Ideas?
Followed by all your links-made all tests... printed on several types of different paper... refine results... Put the new HP Premium Plus paper in... same old problem nor my 4780 or the new 8600 will feed this scum thru.
Thanks anyway...
Diana
-
Hi, I need help please.
I have an Adobe ID to my office for an Enterprise package. I downloaded a trial version of Indesign on my computer at home. The trial has now expired. I created a new Adobe ID, creative cloud has signed and purchased the $79, has gone through the process and paid.
For the life of me, I can't cloud creative install a program entirely. It only downloads the trial versions. With Indesign, it does give me an option to get the license. I paid, I deleted all the apps and started around. Nothing works.
It's frustrating and I have a mountain of work to do any advice would be appreciated.
The real does not work on the weekends.
Help please.
Kind regards
André
1) go to C:\Windows\System32\drivers\etc and locate the file named hosts inside the folder Etc .
Copy 2) host of the file on the desktop and even open with Notepad.
Check if you can see all the entries blocker inside the Hosts file as Adobe 127.0.0.1 activate.adobe.com... etc?
-
play games like farmville, hidden Chronicles and other zynga games has become a nightmare since the last update of adobe Flash, I must have sent hundreds of incident reports to them with nothing happens, help!
Try to uninstall and reinstall Flash Player.
Uninstall Flash Player, and then click on Adobe web site http://get.adobe.com/flashplayer/
Download and install.Uninstall Flash Player
http://kb2.Adobe.com/CPS/141/tn_14157.htmlHow to uninstall Adobe Flash Player on Windows & Mac
http://www.Blogsdna.com/4329/how-to-uninstall-Adobe-Flash-Player-on-Windows-Mac.htm====================== Install ================================
Download Flash Player
http://get.Adobe.com/flashplayer/Flash Player installation instructions
http://www.Adobe.com/products/flashplayer/productinfo/instructions/===========================================================
Troubleshooting:
http://kb2.Adobe.com/CPS/191/tn_19166.htmlFlash Player doesn't work (32 or 64-bit)
http://kb2.Adobe.com/CPS/837/cpsid_83715.htmlTroubleshooting player stability and performance
http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.htmlFlash Player Support Forum
http://forums.Adobe.com/community/webplayers/flash_player============================================================
Flash Player 64-bit: http://kb2.adobe.com/cps/000/6b3af6c9.html
You can install Flash Player 11 on 64-bit Internet Explorer on Windows 7.
http://kb2.Adobe.com/CPS/000/6b3af6c9.html#main_Install%20Flash%20Player%20on%2064-bit%20Internet%20ExploreJ W Stuart: http://www.pagestart.com
-
Anyone tried the new API subscriptionquery-message that has just been launched?
I send this message to the ppg (the same url that I send push messages to) in the system eval:
http://www.openmobilealliance.org/tech/DTD/pap_2.1.dtd">
This is the message I am sending to the ppg (https://pushapi.eval.blackberry.com/mss/PD_pushRequest)
and for some reason, I get the following error:
It turns out that the URL was not correct - this request must be addressed to this url:
"https://pushapi.eval.blackberry.com/mss/PD_cpSubQuery".
When you use the Eval system. -
Starkey Halo AIDS have problems with the new ios 9.3.1
My hearing aids Starkey Halo need bluetooth for streaming with my iphone. Worked fine until I updated my phone to ios 9.3.1. Help! I use this function by calls, the streaming of music and audio books.
You must contact the support of Starkey to see if their devices are optimized to work with iOS 9.3.1. They would be the ones who you explain. If this isn't the case, you may have a problem, because Apple does not support downgrading from iOS. You might also need to re-pairing after iOS update. Starkey should be able to explain that for you as well.
-
Since the upgrade to Yosemite to El Capitan, my life is a misery! I use the software Adobe CC - well, I DID it! Nothing works anymore. I have to Forcequit all apps and nothing loads... anyone?
I have all the latest upgrades.
My operating system is El Capitan 10.11.3
I have Adobe CC 2015 Illustrator, InDesign and Photoshop. None of them will launch, open or close.
My mac is so slooooowwww. I'm sitting for 3 days I look at a spinning wheel. Can anyone help? My roof looks inviting at the moment!
running CC2015 10.11 and it is compatible with El Capitan, so the question is what else is on your system that may be the cause of the problem:
Please run a report of etrececk and post the results here
This will give us one overview of what else is running on your system
If you are currently using any anti-virus Mac you must uninstall it immediately from your system. See web developers page for instructions
If you currently use one "own my ' or 'custodian' of products you must remove them from your system immediately.
Restart and reset the PRAM
How to reset the NVRAM on your Mac - Apple Support
and in the meantime if you need to use CC I suggest you try the following
start in safe mode and run CC
Try safe mode if your Mac does not end commissioning - Apple Support
or Create a NEW account administration and the boot into that and run CC
and see if either of these procedures to help.
and if you must go on your roof with a lounge chair, some Bob Marley albums, not a note.
-
Passing variables to Flash,... using the new method
This is the method I used (note the '? ') pageLoad = $pageLoad"):
< object classid = 'clsid:D27CDB6E-AE6D-11cf-96B8-444553540000' codebase =' http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7, 0,19,0' width = '150' height = '710' >
< param name = "movie" value =' images/menuSys.swf ? pageLoad = $pageLoad' / >
< param name = "quality" value = "high" / >
< embed src =' images/menuSys.swf ? $pageLoad = pageLoad' quality = "high" pluginspage = " http://www.macromedia.com/go/getflashplayer' type =" application/x-shockwave-flash"width ="150"height = '710' > < / embed >"
< / object >
-----------------------
After the new method that corrects the ActiveX thing in Internet Explorer, I am now using this method:
integrate flash animation
AC_FL_RunContent)
'codebase', ' http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8, 0,0,0',
'width', '150'.
'height', '710',
'src', ' images/menuSys ? $pageLoad = pageLoad',.
'quality', 'high ',.
"pluginspage", ' http://www.macromedia.com/go/getflashplayer ", "
"align", "middle",
'play', 'true ',.
'loop', 'true ',.
"scale", "showall"
'wmode', 'window ',.
"devicefont", "false."
'id', 'home',
'bgcolor', '#ececec ',.
'name', ' images/menuSys ? $pageLoad = pageLoad',.
'menu', 'true ',.
"allowScriptAccess", "sameDomain",.
"a movie", "images/menuSys ? pageLoad = $pageLoad',.
"salign", "
); end AC code
-----------------------
The problem I have is that the $pageLoad variable is passed is no longer. I use PHP to have a variable passed in the src string. Anyone have any ideas? I guess that PHP does not like to pass something to this embed method because it is located in an area commented <!-->... .but I am not sure. I even tried to use this method, ' images/menuSys ? pageLoad = <? $pageLoad? > '. It does not either. How to get us to the dynamic variables, passed through embed tags now?slam the neck... DUH!
I forgot to 'echo '.
echo="" $pageload=""?> -
I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
I have over 1000 bookmarks and also use xMarks.
I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.
Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!Thank you for your help
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
Original title: profile has been automatically removed, new profiles created automatically and can not open a session
Help! I closed my laptop (only in the ordinary course of its use) and when I turned it back on, my usual user profile was gone and a couple of new ones have been created. One was created with my professional e-mail address as username (which is strange because I've never used this e-mail in the computer) and the other is empty. I tried to connect both of the profiles using my old combinations of the new user name and password, or user name and the old Word, but it is said that the account and the password is incorrect. I also tried to log on as an administrator, but it says "your account has been disabled. See system administrator. Is it possible to recover the data in the old profile without reinstalling Windows because I am away from home and do not have the disc. ... I use Windows 7.
Thank you very much in advance for any help!You might be able to solve your problem using the system restore. Here's how it works:1. keep tapping F8 during the first phase of startup.2. select Repair from the menu.3. Select an administrator account, and then enter its password.4. When you are prompted, select System Restore.5. set Windows to a point before this problem occurred.On questions of password-, I treat my PC as I have my house: I always have a spare admin account / SpareKey so that I can return new anything that happens. You have a fully tested alternative admin account? If you do not, and if the method above doesn't work, then, you have a major problem that you will not be able to resolve without a CD to repair Windows.
Maybe you are looking for
-
My Mackbook Pro Mail application is running on?
Earlier today, I tried to send an email on the mail app on my MacBook Pro. I didn't know that he had failed to connect until after that I tried to send the e-mail, now whenever I click on the mail application: email that I tried to send pop up like e
-
Hello We just bought a HP Pavilion laptop to replace our old Toshiba one (although begins to regret now). One of the most annoying things on the new computer is that the function keys requires that you press the FN key in order to make them do what t
-
HP Pavilion dv6-6153eo: mPCIe upgrading (stupid GDC EXP)
Hello everyone. Im trying to beath new air in my old laptop so I can use it for a game while I travel those again.the reason why I'm here because I don't know if a 3party (EXP GDC Beast) will work on my computer with the mpcie slot?I also know that t
-
Hello I don't know how to work the breakpoint. Since the LabVIEW is all about data flow, I was wondering I able to break a middle of the block to see the last block? For example, in my VI, he had three large blocks (means the piece of code), may be a
-
Reinstalling XP, registration is not accepted?
Hi all I had a computer crash and burn, then I reinstalled my Windows XP software on an old machine. However, when I try to register the software is is not accepted and constantly tells me I have so many more days to register. I don't buy new license