I have problems with solitaire games in Windows 8. When I select a game I can't abandon it if I want to or just out. I used to hit F2 for a new game, but I can't now.

Similar Questions

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I have problems with my games after update my iPad 2 to 9.3.2,and can anyone help?

  IS that what someone has problem with updated their 9.3.2 at ipad2?

  Yes.

• I have problem with the upgrade of windows 8 for windows 8.1

  When I opened the store and when I click on the option upgrade says I don, t have administrator privileges

  1. press Windows + W and put updates in the search box, select view installed updates search results.

  2. in the window updates installed, search the update for Microsoft Windows (KB2871389) and right-click on it, select uninstall.

  3. now, using the following links, download the update KB2871389 manually package for your edition of Windows 8 and install it:

  Download link [All versions supported on x 86 Windows 8]

  Download link [All versions supported on x 64 Windows 8]

  Download link [All versions supported on x 64 Windows Server 2012]

• I have problems with Disk1: i/o error and com.apple.xpc... Can someone help me please?

  Hello

  Problem: when I put my computer to sleep, wake up, there is a noticeable delay in performance. Internet is slow to reconnect, and GUI is unresponsive. This occurs for about 10-15 seconds, and then things come back to life.

  What I tried:

  I opened the console, and I copied the report. I found a few warnings, which I post some (in failure).

  core of the host [0]: CoreStorageGroup::completeIORequest - 0xe00002ca error detected for LVG 'Macintosh HD' (4F6A789B-E1E1-458F-908A-844CDFA246CB), pv 31458C 06-C725-4647-A817-A8C8461D59A2, near LV byte offset = 242813976576.

  LHOST kernel [0]: disk1: i/o error.

  LHOST kernel [0]: sandbox: launchd (1) political system: deny (1) - flags-writing files/private/var/run/dyld_shared_cache_x86_64

  LHOST kernel [0]: sandbox: launchd (1) political system: deny (1) file-writing-break the/private/var/run/dyld_shared_cache_x86_64 link

  LHOST com.apple.xpc.launchd [1] (com.apple.backupd.status.xpc): HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.

  LHOST com.apple.xpc.launchd [1] (com.apple.cmio.AVCAssistant): ThrottleInterval zero value. You are not so important. Ignorant.

  com Apple.XPC.launchd [1] (com.apple.trustd.agent): ServiceIPC the key is no longer respected. Please delete.

  LHOST com.apple.xpc.launchd [1] (com.apple.bsd.dirhelper): the TimeOut key is no longer respected. He never did anything anyway.

  com Apple.XPC.launchd [1] (com.apple.ZoomWindow.running): HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.

  WindowServer [175]: found 13 display modes 0 x 00000000 [13: 0]

  Also, I restarted in safe mode. The problem persists in the newspaper.

  I created a copy of the computer to restart open log normal startup mode and secure boot mode. Then, I created three files containing - text save messages only in regular boot mode, log in startup mode messages safe and save messages in BOTH.

  Save Messages that appear only in the regular boot

  https://www.dropbox.com/s/up6nkk95768xcrb/onlyinnotnsafe.txt?DL=0

  Save Messages that appear only in the secure boot

  https://www.dropbox.com/s/80w2od220asx7e9/onlyinsafe.txt?DL=0

  Save Messages that appear in trunk too of COURSE and regular

  https://www.dropbox.com/s/zoifq5r4inihjaz/overlap.txt?DL=0

  Can someone help me? Should I think about buying a new HD?

  Also noticed - when I have headphones or whatever it is connected to the phone jacks, iTunes spontaneously opens. In addition, in the log messages

  Thank you!!

  Run disk utility. It is located in/Applications/Utiliites

  With open disk utility select the disk to boot on the left then click the first aid tab, then click: run

  Using disk utility to check or repair disks - Apple Support

• I have problems with my games. A youtube vid!

  I don't know what caused it. None of the people I know what to do.  I can't explain it so I made a video on youtube. flashing is not the problem, it's the "walls" that makes it so I can't see. Here's the URL for the http://www.youtube.com/watch?v=-vhq0P4oxzc vid

  It happens if you turn on VSync on or by increasing the refresh rate? (apparently this works even on LCDs, weird)
  I also want to make sure you have the latest drivers for your screen if you can find them (conductive screens have too).

  Sources: http://forums.nvidia.com/lofiversion/index.php?t60536.html
  http://forums.nvidia.com/index.php?showtopic=10972

• I have problems with a text on a background of non-text cursor. How can I disable it?

  Whenever I click somewhere, a font slider is displayed on a background of non-type-able.

  Firefox has a feature called the keyboard navigation that lets you run the cursor through the text on the page. You can use the F7 key to turn on and off or uncheck the first box here:

  "3-bar" menu button (or tools) > Options > advanced > general mini-onglet > 'always use the cursor keys to navigate through the pages. "

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• Satellite L870 - 16 c - display problems with some games

  Hello

  I bought this laptop recently and it turns out that I have problems with some games of tearing.
  But with all the games, only some of them (ex: the Triune Witcher, borderlands,...).

  So I was wondering what could be the problem?
  So far, I've heard that could be a problem of v-sync, but everything I made this topic has not changed a thing.

  Is this just a software problem or would it be a hardware problem with the graphics card?
  I plan to send my laptop for Toshiba, so I wanted to know if it was the only solution (and if it was indeed a solution).

  For more information, this is a C with an ati radeon HD 7670 L870 m graphics card - 16 (driver version: 12.10 - 130101 a - 151427E - ATI), running on 64-bit windows 8.

  Someone at - it indexes?

  Thank you

  Post edited by: Bakappoi

  What game problems do you have exactly?
  Could you be more specific?

  You said that you have some problems, but NOT with all the games.
  That is why I don't think you have a hardware problem

  In most of the games (all) cases problems are related to drivers of graphics card in my long game experience, all the questions that I had in the past were related to problems of compatibility between the driver and the game.

• Problem by opening a window and with Solitaire game.

  Original title: problem with the function

  To open a window, I need to click several times before opening. With Solitaire game, for tool to move a card is almost impossible, because it flies right back to its place of origin.

  Except that my Windows 7 works well. I reinstalled my OS and have set my mouse functions, all to nothing does not.

  I also did a full system check and there is no virus - the system is clean.

  I look forward to any suggestion that could address this problem. Thank you.

  Check the Task Manager to see if an anther performed with solitaire.or malware scan

• I think I'll have problems with registry - I can't add or remove programs, when I rebooted until windows starts I have SEEN 150/150 REGISTER... any ideas

  I had to restore my computer from these problems, had problems with wire4less router cause took off so wireless cause I got no internet.  Has worked with the provider, Charter and got back internet but do not add or remove programs - have problem with printer HP TrayApp, s if lack but cfan can't add restricted cause - restricted user-entered and gave access, but still does not work.  Will try F8 and start the repair to see if it works.  Any ideas?  HELP... l.Thanks

  Thanjs - I did take it to someone to clean.  Always have problemd with printer but am back to him.  Thanks for all your suggestions.  I guess I've done too many bugs diffedrent and messed up.

• Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Windows 7, problem with the game

  Problem with the game Mu Online WebZen. This match started Web site. During the starstu is projected an error 1003-0
  screenshot: http://img266.imageshack.us/img266/6053/beztytuuboq.jpg
  The problem is in the decoding of the code GameGuard. I try everything, maybe update IE?

  Sorry for my English :/ I only test Windows Seven, I try to help detect the system problems.

  Hi Szogun,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is due to a problem with advanced user and would be better suited to the Windows 7 Technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Web proxy settings are not configured correctly. Have problems with games and other applications.

  original title: apps do not correctly configured

  The default Outlook Express mail, The default Outlook in the Express News with the Internet Explorer Web Proxy are not configured correctly. Because I had problems with the game apps and stuff in my email address.

  Hello

  · You receive an error message or error code?

  You can access the links below:

  How Set Up Outlook Express - and http://support.microsoft.com/kb/2409264

  To configure the web proxy:

  HOW to: Configure Internet Explorer 6.0 as a Web Proxy Client in Windows 2000

  http://support.Microsoft.com/kb/310296