Similar Questions

• Problem with the links and libraries CC

  Dear forum

  I have a problem that can be solved, hopefully, I see myself as a new user of Indesign and help would be appreciated.

  Since the update to the new version of Indesign, I had a problem when I open multiple files and all the links are missing. These are stored in the CC library in more than a library,

  After attempting to repeat the assets, I get the following message.

  

  I made a copy of the file and open this file without result

  I think it's a question of libraries CC because it seems that the library is unable to find the file, but not 100% sure here, just a guess.
  I am connected to AdobeCC when the message above

  I hope someone can help

  Thank you

  Note: no files where changed or moved the location, including the CC library during the update of Indesign.

  When you have problems with the CC libraries, this often solves the problem:

  Go to the creative cloud desktop application (found in the Menu bar on Mac, the task bar in Windows). Click on the "gear" icon > Preferences > General. Logout, then signed again with your Adobe ID

• I have problems with the mouse and keyboard from freezing when scrolling or by typing

  I have problems to scroll down to a file because everything freezes at some point and it is impossible to read the rest of the article.

  I also experience problems when I try to type as I hit him at the same time letter 3 or 4.

  Could someone help me because I don't know what to do.

  Norman John

  Work through start-up mode minimum troubleshooting to see if a startup program is causing problems.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  If that allows to identify the culprit, something may have slipped beyond Microsoft Security Essentials.

  This scanner. Allow two hours for this execution.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Don

• problem with the links and URL 2

  Hi guys

  on this page http://criminaltrafficlaw.com/ all the links for a reason any merges the domain name with the real link by default.. .so if I put a link to msn.com on a picture, when I publish it, it reads http://thesitename/MSN.com . Why is this happening? How can I fix it...

  all images on the page footer are related... Scroll down to check...

  Thank you for your answers

  Try to put the full address http:// in external links.  I don't think browsers are smart enough to be able to distinguish a .com from any other file extension, so he is looking for a file with this name, not a web address.

• Had a virus on the computer, deleted, now I have problems with the homegroup and DSN

  Cause of my current problem:

  2 weeks ago, I found that my computer has a virus. He removed the BFE service, firewall Windows, Windows Defender, blocked my anti-virus (Trend Micro), cut other security services... he pretty well blocked, deleted or close all my computer security programs.

  I was able to fix, but my computer did not work in the same way.

  I was able to return back BFE and Windows Firewall, turn on other security services and get up my antivirus and running. 2 weeks later my antivirus deleted 9 virus and thousand and something web threats.

  Now to my current problem:

  I was able to establish the homegroup on my computer, but when I check the files that I want to share, Save custom settings, same when I go to a folder and select 'share with homegroup' manually

  When I hit Homegroup troubleshooting need to network troubleshooting and I end up getting this error "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding"

  I tried following this threat: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/erroryour-computer-appears-to-be-correctly/aeb7b5df-55ac-456e-aba3-96f9d90898d6

  Did not work. I tried reseting my router and modem but nothing. I can't first homegroup to work if I does not resolve the DNS.

  This problem is probably due to the fact that the virus tried to redirect my DSN to computer hackers, but

  I am running Windows 7 Home Premium 64-bit

  modem: Motorola MIPDSLA

  Router: Cisco Linksys E1000

  any other information needed on my computer please let me know

  Sorry for this post is really long, I tried to summarize as much as I could

  I thank all those who took the time to re-read this threat and decided to help me.

  Although there is a small chance, you may be able to fix this on a service by service method, it is may be easier (and faster) to do a clean install.

  I would also mention that if you got a virus to trend was obviously not a very good job of protecting you.  May want to rethink the installation of malicious software program.

• Problems with the layouts and headers

  Hi I'm a newbie, trying to page layouts, I have 2 questions. I would be grateful for any help or pointers to tutorials.

  (1) I have problems with the links at the top of my page. They are text based and in a table of 2 rank. They have a huge ditch around them and no matter what I do I cannot resize the table or change the text to be less than a gap below it. Basically I have a huge gap between my links at the top of the page and the main logo and the main logo below. (and I think they are related as the h1 which I don't want that they're not really the header only links). Here's the code for that.

  <table width="740"  border="0" align="center" cellpadding="0" cellspacing="0" class="HeaderLogoButton">
        <tr align="center" valign="top">
          <td width="288" height="48"><h1><br /><br />
          </h1></td>
          <td width="452" height="25"><!-- TemplateBeginEditable name="HeaderLinks" --><span class="TextButtons"><a href="../index.html" class="TextButtons">Home</a>      <a href="../featured.html" class="TextButtons">Featured Company</a>      <a href="../youngpeople.html" class="TextButtons">Young People</a>      <a href="../andmore.html" class="TextButtons">And More</a>     </span><span class="TextButtons"> <a href="../blog.html" class="TextButtons">Blog  </a></span><!-- TemplateEndEditable --> </td>
        </tr>
        <tr>
          <th height="48" align="left"><a href="index.html" title="My Site Title"><img src="../images/My Site_logo.png" alt="My Site Logo" width="245" height="46" border="0" align="left" /></a></th>
          <td align="right" valign="top"><!-- TemplateBeginEditable name="HeaderButtons" --><img src="../images/facebook.png" alt="FaceBook Button" width="36" height="36" align="top" /> <img src="../images/twitter.png" alt="Twitter Button" width="36" height="36" align="top" /><img src="../images/blogbutton.png" alt="Blog Button" width="49" height="47" align="top" />  <!-- TemplateEndEditable --></td>
        </tr>
      </table>
  

  (2) my second question with headers in general. As you can see in the code I have a "My Site_logo.png', as the main logo for the site, what concerns me is pointing to it as the main h1 header so that when the spiders come to visit, either by the additional logo or html, they read that the site is called"My Site"the main header. How can I make the logo/title of the h1 of the code section? I'm afraid of making a mess of the code at this point, so any help is very appreciated!

  Thanks in advance

  evilJim wrote:

  Hi I'm a newbie, trying to page layouts, I have 2 questions. I would be grateful for any help or pointers to tutorials.

  (1) I have problems with the links at the top of my page. They are text based and in a table of 2 rank. They have a huge ditch around them and no matter what I do I cannot resize the table or change the text to be less than a gap below it. Basically I have a huge gap between my links at the top of the page and the main logo and the main logo below. (and I think they are related as the h1 which I don't want that they're not really the header only links). Here's the code for that.

  In the first cell of the table, you have a tag h1 (header tag) (see below), in this tag you inserted two break tags
  by pressing return on your keyboard twice. These breaks are reduced the height of the first row of the table, that's why you have all the space under your links.

  
  
          

  evilJim wrote:

  (2) my second question with headers in general. As you can see in the code I have a "My Site_logo.png', as the main logo for the site, what concerns me is pointing to it as the main h1 header so that when the spiders come to visit, either by the additional logo or html, they read that the site is called"My Site"the main header. How can I make the logo/title of the h1 of the code section? I'm afraid of making a mess of the code at this point, so any help is very appreciated!

  Thanks in advance

  At the moment you have nothing apart from 2
  tags in your h1 tag (see above answer to your first quetsion.

  Purposes of search engine, you can encapsulate your image in an h1 tag and provide an overview of more descriptive than "My Site Logo" for the images 'alt' tag

  

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!