I have to disable all of my former adobe products when you join the cloud?

Similar Questions

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  When you use the Brush tool, it always comes back to the single stroke and no fill. How can I fix it? I have already disabled the new art of a choice of the basic look.

  Double-click on the Brush tool and you will see important option.

  Please also read the manual on the other options.

• I'm unable to deselect specific fields when you set the Reset button in a form.  I can only "select all" or "deselect all". Someone at - it happen?

  I'm unable to deselect specific fields when you set the Reset button in a form.  I can only "select all" or "deselect all". Someone at - it happen?

  Yes, this is a common problem. Use the SPACEBAR to toggle individual mailboxes.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Message box color settings disabled when you use the dialog "Windows color and appearance".

  When you use the configuration dialog box 'Window color and appearance', why are there color settings invalid?  I want to remove the default 'Pastel Pink' value that I find unacceptable.

  I can switch to "Classic Windows" that uses no pastel pink color, but "Classic Windows" does not support "Aero Peek", and the windows look pretty tired.  You can only take "Classic Windows" for many years.

  Color settings are disabled for: buttons, Message box, title of Palette, scroll bar.

  Help, please!

  Me too I'm frustrated by that.   Found the old windows with very honest XP environment.   I used the advanced settings, but has not found a way to save the changes with a label, so I knew that the changes you made.   It is just Frigging trial and error and very frustrating.

  Why are there no way to return either to the default value (not found a default label) or save the settings changed under a name?    It is a productivity KILLER.

  Hello

  Interface user of Windows 7 is theme based. The colors are defined by the theme.

  You still have many color options that can be used to change the colors.

  Right click on the desktop and select Personalize. Click on the color of the window at the bottom of the window box.

  You can select one of the colors in the boxes colored at the top.

  Adjust the intensity of the color with the cursor.

  Click on the color down mixer and you can a lot of variations on all the different color choices.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• attachments: I have a folder in my email account and I want to join the entire folder to a new email

  I have a folder in my email account and I want to join the entire folder to a new email

  I have a folder in my email account and I want to join the entire folder to a new email

  • You use Windows Mail?
  • Are these messages in a user created folder?
  • What is this file in bytes?

  There are a few ways depending on what is your ultimate goal.

  1. Open a new message window and drag it to the side a little. Click a message in the folder and Ctrl + A will highlight all. Drag them into the message body of the new messages, and they will all be committed.
  2. Create the folder on the desktop. Select all message headers, and then drag them to the desktop folder. The ZIP file and attach it.

  Size matters when it comes to sending.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• I forgot to disable Adobe products before you reinstall Windows 7 and now can not activate

  I used Photoshop CS3 and InDesign 5.5 on two computers, so all my activations are exhausted. On one of these computers, my Windows 7 system was very rough and I decided to reinstall. Unfortunately, I forgot to turn off my Adobe programs before you reinstall the operating system. I reinstalled Photoshop and InDesign, but I can't turn it back on because the Adobe system considers as I already have the maximum number of facilities.

  How can I solve my problem, now I can no longer speak with an Adobe engineer who has access to my registration information?

  (Please do not confuse this post with another I sent this morning on Photoshop stopping working on my other laptop and refusing to reinstall.) And again with this laptop, if I managed to reinstall Photoshop, how do I activate, since I am unable to reactivate before uninstall/reinstall? I added that note, since the question of activation is shared by two laptops.)

  You should contact the Adobe Support via chat and ask them to reset your activations.  Since you seem to have several problems, be sure to ask the help of reset.  If you start to ask for help more they may not help at all and you will return to these forums where no one can help you.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• All windows disappear except Composition and timeline when you drag the time indicator current (CTI)

  All windows disappear except Composition and Windows calendar when you drag the time indicator current (CTI). When I let go of the mouse, all the windows reappear. I'm sure I've accidentally changed a parameter overview, but I can't find where this setting is. I want just all the Windows I normally opened to stay there while I drag the CTI.  Any ideas how to solve this problem?

  I have NVidia Quadro FX 3800, driver version 341.92, which is one of the most recent drivers, but that made me think. In the NVidia Control Panel, I checked manage 3D settings and restored all global and set default settings. Now it does not work properly. I think that I have stayed a while to solve something for a different application, and who touched somehow AE. Thanks for the help!

• I think it would be helpful if when you open the drop-down list for a 3D object keyframe controls have the same color as the 3D arrows in the project window.

  I think it would be helpful if when you open the drop-down list for a 3D object keyframe controls have the same color as the 3D arrows in the project window.

  You can suggest that here:

  Feature request/Bug Report Form

• When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  Reset preferences, reset the default workspace, and purge the cache.

  Damaged preferences or workspaces can cause unexpected behavior in Adobe Bridge. Purge the cache can solve problems of the thumbnail display.

  • Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  • Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.