I have to press F1 at the beginning upward

Similar Questions

• I have to press hard on the touchpad and it works

  I have to press hard on the touchpad to make it work.  Can I do to solve this problem?  Thank you.

  jennifergusonat,

  You need to reload the drivers for the touchpad. You can access the drivers by opening the Device Manager, click on the > symbol next to the mouse and other devices of score, make a right click on the driver installed is listed, click on uninstall and then perform a restart.

• keep the program, stop the office pop up at the beginning upward

  keep the program, stop the office pop up at the beginning upward. I removed Skype because it came with start-up. I have Hp dock or something that is close to files on my desktop. Same thing with Cannon. I'm tired of "xing"off each time it starts. "

  I moved your post to Windows | Programs where it will receive more targeted attention. I can't determine which version of Microsoft Windows you are using, so I try to make these generic instructions in nature.

  Start by typing the Windows key + r Type or paste in msconfig and click OK in. When the applet opens, you will find all the programs that starts with windows on Startup as well as their location of registry tab or the program folder. Simply uncheck all that you want to remove the review. While you're here, take careful consideration to everything you think you can do without. This area is usually grossly overcrowded with utilities and unused software.

  Changes will not take place until the computer is restarted, for example to uncheck a program won't stop him. It simply prevents starting the next time Windows is started.

  Further examination of all the things that start automatically is probably through a small utility called Autoruns program (Yes, that's plural) from Windows Sysinternals. You can get a copy here:

  
  

  Autoruns for Windows

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Reference Dell dock always shows an error at the beginning upward

  OT: Dell Dock.

  Dell Dock always shows an error at the beginning upward. Tried everything to remove it, but after three days, it always works on the removal of the transformation. What should I do now? I have a Dell Inspiron 545 s w/Windows 7

  Never mind. I'm tired of messing around with it. I disabled in the Startup tab "Yes I was" trying to delete, but it's not worth the hassle. Sorry for taking your time. At least I don't have to watch it at startup

• I receive a notice at the beginning upward: AppleSyncNotifier does not work. What can I do to fix that?

  I receive a notice at the beginning upward: AppleSyncNotifier does not work. What can I do to fix that? Thank you.

  * original title - something at the start doesn't work well... *.

  Hello

  AppleSyncNotifier belongs to Apple iTunes, etc.

  Uninstall/reinstall iTunes

  Follow the information from apple to the links below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  ____________________________________________________

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  ____________________________________________________

  or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  ____________________________________________________

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• PS4 falls down at the beginning upward

  My version of PS4 which worked very well has stopped working, it overwrites the beginning upward. I clean installed the program several times but the result is the same. Any ideas?

  Follow these steps to reset the Cache to your Photoshop / preferences - http://forums.adobe.com/thread/375776

  Uninstallation / reinstallation clear preferences that can cause a problem.

  Also, check all the corrupted fonts / invalid. These must be removed. Photoshop analyzes the fonts all at the launch. A file of College rites can goof this process.

• I have to press F11 for the Send button to show on Office 365 since their upgrade. Perform alternative work and more pressing f11

  Submit used to appear on Outlook 365 button. Now, I have to press f11 to get the Send button appears. It is a new problem, it used to work until about a week ago.

  An another possible workaround is to force 'repaint' of the screen by changing the zoom level (for example, Ctrl-then Ctrl +). Alternative workaround noted on the Microsoft forums are summarized in this post: https://support.mozilla.org/en-US/que.../972083#answer-482082.

• Satellite M70: I have to press SHIFT down the Capslock

  Hello

  I have a laptop with Windows XP Pro installed from the rescue disk from Toshiba.

  But now I have the problem that when I press the capslock key the capslock go s on, if I press the capslock again the capslock is turned on.
  I have to press the SHIFT key down the capslock.

  Why is this happening?

  Thanx
  Wendy

  Hello Wendy

  I have the same model of laptop. The history is interesting and I checked all options on my M70, but in my case everything works fine.

  Setting for something like this is unclear to me. Let's see if someone else has a logical explanation for this.

• Satellite A60: lost "in touch with Toshiba' at the beginning upward

  I lost the 'In Touch with Toshiba' at the beginning, so do not have the recovery disks. This was because using the diskette bad in the first place - we have three laptops from Toshiba!

  Any suggestions? Turn on the computer and now F12 does not work.

  As far as I know, if you use a bad recovery media he will not result with any critical damage. Maybe you can install but the OS does not start correctly.

  I have to be honest to you and your ad is a bit confusing to me. You can start your laptop as usual? You can enter the BIOS settings? What happen exactly when you press the power button / stop?

• Satellite 1800 - 752S does not load Windowx XP in the beginning upward

  Good day to you all,.
  While I worked with the software 'Money', suddenly the "Hourglass" was released on the screen for a few seconds and the machine frooze.
  Impossible to do anything to stop it with the start/stop button.
  Sart up even once, windowz XP will not load and a message comes on the screen and read follow:

  First: tomorrow contact Toshiba,
  The latter: press f12 for the boot device selection menu (anything happen with this function)
  Then the following are displayed:
  Version Intel boot agent 4.0.18
  Copyright (C) 1997-2001 Intel corporation
  PXE - E61: media test failure, check cable of
  PXE - MOF: exit intel PXE rom
  Insert system disk in drive
  Press any key when ready
  What is happenning, I do not have a system disk, but only the recovery cd, I would like to know what I need to do and what is the procedure?

  Thank you very much for her
  See you all and best regards

  JCP

  Hi James,

  The message you describe indicates that your laptop is trying to boot from a connection to the local network. Normally, this is the last set in your BIOS selectable boot devices. The usual order is to have the HARD drive first followed by the CD and then the LAN option (it can also be a floppy drive in there too).

  If your defined boot device selection command is similar to the above it would indicate that your laptop has been unable to boot from your hard drive and since he was probably not a CD or DVD in place at the time where he then tried to boot from the local network as the last option available.

  If you turn on your laptop and then hold down the F12 key until the phone beeps you should be able to see the boot device selection screen. If the sequence shows the HARD drive of first or second in the list, then I think that your hard drive may have failed and the unit can charge is no longer the operating system of it. In this case, you can try to boot from your recovery CD by loading the CD and then turn your laptop while now the key 'C' until the machine beeps.

  Kind regards

• Error: could not find c:\windows\idew321.dll in the beginning upward

  This error at the end of the boot.  Cannot find any references to this dll through Google searches.  I got infected with a virus called system tool and wonder if the virus is still there, looking for this dll.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• Skype connect at the beginning upward

  I have been using Skype for years and its always automatically logged me in when the computer starts. A few weeks ago this stopped happening. He says the connection failed on the screen of the app. When I then enter my password and manually connect, it works. I checked the box to remember password, but it does not work. I have upgraded to the latest version and still not the issue.

  After no help from Skype, I have now managed to set the solution. Terrible load because I am a customer paying, get better assistance on free systems I use...

  In any case... I've deleted the Skype entry in the Mac Keychain, then started Skype and after connect you a new keychain entry was created. After the computer restart Skype connect now to OK. So it must have been a problem with the Skype Keychain/data wire.

• Satellite A500 - 17 X: Power Saving Utility was off at the beginning upward

  Hello

  For a while I get a window on the move upward with a boring message saying that the utility of Toshiba power save has been disabled.
  I am running Win 7 and this started to happen after I did a system recovery.

  I would like to remove this message from the beginning to the top?
  My machine is a Satellite A500 - 17 X.

  Thank you very much Warren

  Hello

  I would recommend allowing once again.
  Utility energy saving Toshiba is part of the VAP (value added package).
  Maybe there is something wrong with this package installed so if you want you can try to reinstall this package again.

  If not energy saving are in Control Panel-> options-> change the power plan settings.
  Check if the Toshiba power save can be activated it

• Beeping sound and flashing - Satellite A100-200 at the beginning upward

  My Satellite A100-200 is three months old and stopped working. When I start there is a continuous beep and a flasher above the hard drive indicator.

  Is that what I can do or is it a warranty repair

  Hello

  stop your machine immediately, or that you have installed things before? Have you tried to remove the hard drive and if you have 2 RAM modules at least one of them?

  If all fails, you will need to give your machine a local service partner. They will then solve your problem.

  Welcome them