Beeping sound and flashing - Satellite A100-200 at the beginning upward

My Satellite A100-200 is three months old and stopped working. When I start there is a continuous beep and a flasher above the hard drive indicator.

Is that what I can do or is it a warranty repair

Hello

stop your machine immediately, or that you have installed things before? Have you tried to remove the hard drive and if you have 2 RAM modules at least one of them?

If all fails, you will need to give your machine a local service partner. They will then solve your problem.

Welcome them

Tags: Toshiba

Similar Questions

  • Where to buy a media remote for Satellite A100-200 to the United Kingdom?

    Hello

    I recently bought a laptop Toshiba A100-200 refurbished John Lewis, who, partly under renovation, came not with the media remote and so, for the moment, there is a huge hole in the side left where it should be.

    Where can I get a new and how much would it cost?

    Thank you very much

    Ian

    Hello

    You can try either ebay or you can contact a certified partner and ask them, since they can you spare toshiba, also provide the remote control.

    Here´s a link to find the closest partner service available in your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Hope you find what you need for your machine.

    Have a nice weekend
    Welcome them

  • Upgrade Satellite A100-200 RAM question

    Hello

    I have a Toshiba Satellite A100-200, I want to move to 4 GB.
    I install 2 x 2 GB kingston kvr667d2s5/2 GB pc-5300 ddr2 667 mhz.

    Every time I make a control sites Internet it tells me to install PC24200 ddr2 533.
    The above will work even as the 4200 ddr2 533hz as those that I want are a lot cheaper.
    Thank you.

    Will be two sets of ram pergorm exactly the same thing as long as they are paired.

    Thank you

    Hello

    It depends on your bus (FSB) front.
    If the modules of 667 Mhz FSB support 667 Mhz then the PC5300 inserted will be run with maximum efficiency (667 Mhz).

    But if supports FSB, only modules of 533 Mhz and RAM will run at 533 Mhz only even using the fastest modules (PC5300)

    So what you need to do is check the FSB value. You can install a hardware diagnostic tool (IE Everest home edition) to verify the FSB.

    See you soon

  • Virtual sound stops working - Satellite A100

    Dear all

    I seem to have a problem with my virtual sound on my Satellite A100. It seems to work intermittently, often it doesn't work anymore and I can't control if it is on or off. If I reboot, it can start working again, but not always. I did a factory restore of the machine that clears the fault, but after a few start-up, it starts to happen again. It doesn't seem to be a reason for the problem.

    Has anyone experienced this problem and managed to work around it?

    Thank you

    Hello

    I put t don't know if this helps but try to update the utility audio virtual ansd the audio driver. To do this, check the Toshiba driver page.

    I put t know if it is interesting for you, but in this forum, I noticed that on some Satellite P100 crackling sounds/noises can be resolved by updating of all of the BIOS (v 2.1 or higher) and the audio driver.
    Need to first update the BIOS

  • Can not burn the backup of the data on a DVD - RW on the Satellite A100-200

    Hello

    I did a lot of audio and data cd using Nero burning, but can not burn a dvr - rw data backup.

    Advice please.

    Satellite A100-200 and xp home

    What do you mean with data backup?
    And have you tried other DVD discs? I think your drive is compatible with the player so test drive of other manufacturers.

    On the Toshiba laptop I always use verbatim, and I never had any problems with it.

  • Satellite A100 - buttons on the touchpad enabled without clicking

    I have a laptop pretty old (Satellite A100).
    My touchpad is upward - the left keeps activating button that no one touch.
    Is there something specific I should do to fix this?

    I tried updating the driver and restarting the computer several times - no luck so far. My knowledge is pretty basic, so I would appreciate the simple answers in layman's terms... Thank you very much!!

    Julia

    Hello

    Hmmm I think that it s touchpad hardware question too.
    So, I agree with Akuma parts needs to be replaced.

  • Need driver Sound WXP for Satellite A100 (PSAARH)

    My Satellite A100 is shipped with the version of Vista, when I downgrade to XP, the audio driver may install correctly but there is no sound. (I check software and hardware button).
    do you know that drivers will work on windows xp?

    Hello
    I PSAARE (A100-011) and I spent from Vista to XP Professional and I need to download the new version of the realtek drivers 1.61 and it works perfectly. I wonder do you also have problem with PCI device unknown who in fact is Texas Instruments Texas Instruments PCIxx21 Integrated FlashMedia Controller. It cannot be installed with all Toshiba drivers, and it is the SD card reader.

  • Need driver sound WXP for Satellite A100 - 044 PSAANE

    I bought a new laptop Satellite A100-044 PSAANE with Vista as operating system; I downgraded to Windows XP and I have downloaded all the drivers required for the Web from Toshiba site; But still I have no sound in my laptop.
    Can someone help to solve this problem please?
    Please note that I have this driver from the Web site: sound-xp-51005345_2
    and I get this error message: "Bad DirectSound driver. Please install the proper drivers. error 88780078 "code
    I'm waiting for your answer please

    Hello

    I checked the page of the Toshiba driver and the PSANNE Sat A100-044 need driver audio XP version 5.10.0.5345. The zip file is called sound - xp - 51005345.zip.
    You have downloaded a sound-xp-51005345_2. Maybe's it a difference between these two audio drivers.

    Please check the txt-file of installation instruction on the driver page. This document contains an install command that is very important.

    One question; have you installed the latest DirectX software available?
    Remember that this software has been installed. It s necessary to the operation of sound and graphics.
    You can start this tool by typing the command: dxdiag

  • Satellite A100-785 - after the virus the bus USB and wireless do not work

    Hello
    I have a Satellite A100-785 with Vista 32 bit.

    I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
    I downloaded and installed a new driver for my model, but it does not work.

    Help, please!

    And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
    See:
    [http://i39.tinypic.com/rw4f8p.jpg]

    Hello

    You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

    If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

    Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
    In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

    If you can t create the recovery disk, you must order a new Toshiba directly:
    https://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Satellite A100-200 - screen dead/black

    A100-200 laptop bought in November 2006 and have not used it since. Last year, the screen is lit and failed frequently until it now shines at all. The fans are working and heat production.

    Some people say the motherboard was going on, but this seems to be such an easy answer even for the so-called experts. A Dell laptop, that I didn't have with professionals, saying he needed a new motherboard.

    I put one in me only to find out that it was the power supply (brick) who needed to change!

    Who can make a trust?

    Ideas, people?

    Hi alexlendoye,

    In my view, quite easy, you can check the laptop: connect a monitor external and that s all!
    If the external monitor works well, you the internal screen is defective and must be replaced (perhaps only the FL inverter which controls the backlight).

    By the way: you can get the new spare parts of an authorized service provider. Technicians can also swap the display for you it's a little tricky.
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Satellite A100 - by pressing the Enter key and BACKSPACE insert a backslash

    The keyboard on my Satellite A100 has a perculiar behavior.
    The Enter key and BACKSPACE times return the insertion point to the beginning of the next line, and then insert a backslash.

    The behavior is similar in various products such as MS Word, internet Explorer, Notepad, WordPad, to name a few.
    The BACKSPACE key returns to the top of the page in MS Word and Notepad.

    This behavior is very frustrating and makes every day very difficult calculation.

    Does anyone have a solution to this problem

    Hello

    First I thought that this could be a result keyboard or Ms Word, Notepad setting language setting
    But while reading the story one more time, I think that this problem could be linked to the failure of hardware.
    But this is just a suggestion.

    I put t know if this problem would appear on new recovered BONES.
    Have you tried to restore the operating system using the Toshiba Recovery CD?
    Maybe you should do to see if it's really a hardware problem

    Good luck

  • Cannot start my Satellite A100 - 1 G - the battery light just flashes

    I have a laptop A100 - 1 G. Indicator of battery showed low and I plugged the power supply for the laptop and he showed the connection was made, later she flashed low battery connect to the power (although it was still connected) and then he would flash his load and then back to low battery, until it ends by died.
    Now it shows even not any light when I plug in the power adapter and start not upward, the battery light blinks just and nothing else.

    Help would be appreciated!

    I think the problem is the battery. Remove the battery from the laptop, connect only leave, adapter / it connected ten minutes and try to restart your laptop.

    Please let us know what happens when you do this.

  • Re: No sound on my Satellite A100-496

    My laptop is a Toshiba A100-496

    The audio controller is a Realtek High Definition Audio.

    Initially did his, but no more.

    Have updated to the latest version of the drivers from the Toshiba Web site but still no sound!

    Looked in Device Manager and it says that the equipment works.

    I can't solve this problem, can someone help me?

    Hello

    Have you checked if you don't cut the sound accidentally?
    Please check this!
    You can disable the sound in Control Panel-> sound or by pressing the FN + ESC keys

    Welcome them

  • Satellite A100 - questions about the keys to the left hand and added value package

    Hello:

    The work of doesn´t special keys on left hand. I mean, the keys under the power on button which usually starts the web browser and works with the DVD.

    Another question. The value-added package that was installed on my laptop has got a call from the Toshiba Fash utility maps. When I upgraded to the latest version (previosly I had to uninstall it) this SW is not installed. How can I get it back?

    Thanks in advance.

    Hello

    Value added contains several applications:
    -Toshiba components pilot common
    -Toshiba Utilities
    -Toshiba PC Diagnostic tool
    -Toshiba Power Saver
    -Toshiba Button support
    -Toshiba zooming utility
    -Toshiba Flash cards

    So as you can see, the button support is included in this package. I don't know what the problem is on your laptop, but when the VAP is installed correctly the multimedia buttons and Flash cards should work correctly.

    Try again please remove VAP system, restart the computer and install the latest version available. This latest version works well on the different laptop models (on my Satellite P200D too) and it should work on your too.

  • strange monitor beep sound and blank when I installed the graphics card XFX Radeon HD 7870

    OK, so I removed my GTX 555 after that I bought a brand new XFX HD 7870, installed and activated on the pc.
    The monitor was empty and the pc tower was 5 beep sounds, then pause and repeat, over and over again until I turned off. When I replaced the GTX 555, all was well again, so I know this isn't the other components.
    Any suggestions?

    See http://products.xfxforce.com/en-gb/Graphics_Cards/AMD_Radeon%E2%84%A2_HD_7870/FX-787A-CDFC.

    You will need an adapter and you may need a new power supply.  Note the minimum requirement of the PSU of 500w.

Maybe you are looking for