I have to press the f2 key to start windows xp

Similar Questions

• Need to press the F1 key to start windows

  Whenever my computer is started or restarted also it takes a long time to get up and running, then I get the message:
  Primary drive 0 not found
  * (30 second break)
  Strike F1 key to continue, F2 to run the Setup utility

  Im running Windows XP, 3gig Pent 4, 800, 2.5 GB RAM bus speed. Any new 500gig hard drive SATA, from 500gig external HARD drive. I had to do a clean install of the operating system, after the system crashed after that automatic updates are released a few weeks before.

  Hello
  Press f2 go to settings
  Look for the boot sequence tab
  Make sure the folder c: / starts first

  Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Whenever I have to press the C key on the keyboard if move my crursor at the beginning and place the letter C

  must always go back and remove the letter c and then place the cursor back to were I had left to and try to type the letter c again in the right place. I'm going there about 5-10 times before it will not send the cursor at the beginning and place the letter where it should be.

  Hi windancer,.

  It may be a problem of keyboard as Richard suggested.  If it's a laptop, it may be that you hit the touchpad when you type.  I suggest this because I used to do that myself when entering some letters on my laptop.

  If this is the case, there may be a control panel option to disable the touchpad when you type, or you could try to install something like touchfreeze (http://code.google.com/p/touchfreeze/), who will do exactly that.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.

• How to disable the menu popping up when I press the ALT key.

  Is there a way I can disable the menu that appears when I press the ALT key? I use it as a shortcut on teamspeak and it's really annoying to see the menu everytime I press ALT.

  See this article:
  https://support.Mozilla.org/en-us/KB/what-happened-to-the-file-edit-and-view-menus

  If you have the menu bar to show all the time, the Alt will be disabled and hit don't reveal not the menu bar. Use show/hide toolbars for the menu bar always see in Firefox.

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.

• Satellite Pro C870-172: how to use the Fn keys by pressing the FN key

  I recently bought a Satellite Pro C870-172 and I found that the FN key is used by default.

  I mean that if I need to use the normal F1 or F2 key, I have to press "FN" + F1 or F2 etc... otherwise I get the function of toshiba. which would be fine, but in a lot of technical programs, I need to use the normal F1 F2... touch!

  is there a way to reverse the default system so that when I press the F1 key, I get the F1 function and when I press FN + F1, I get the toshiba service?

  Thank you

  M2

  Yes, go to the BIOS by pressing F2
  Now switch to the Advanced tab, and then open the System Configuration.
  Here you will see the option called: mode of the function (without pressing Fn first) key
  This option should be disabled.

• By pressing the ENTER key in the first tab-> a button in a different tab is pressed?

  Hi guys,.

  I am facing a problem. I have a tab with 4 different tabs. When I'm in the first tab and try to change the value of a control by pressing the Enter key, it suddenly switches to the second tab and presses a button here.

  No idea how it goes? I want to avoid that from happening.

  Thank you

  Check your tab order and control is enabled is a shortcut bound to it.

• Press the backslash key shows the start menu, how to stop it from happening?

  Original title: keyboard shortcut

  Hello

  Windows XP system.  Any program I use, when you press the backslash key, the menu Start come.  How can I disable that I can't find a list of shortcuts for this a key operation.
  Thank you.

  It sounds as if you have inadvertently created a "shortcut" that makes the Act key backslash as the Windows key.  Or you may have a faulty keyboard.

  • What happened to your system, just as this behavior started?
  • You have another keyboard that you can try (and Yes, that happens)?
  • What do you use for an antivirus application and is his current subscription?
  • Establishing general principles, download, install, update and run scans with each of these two free tools; do not run the scans at the same time; Let tools delete or quarantine any malware they find; You can uninstall when in fact, if you want to
    MalwareBytes AntiMalware
    SUPERAntiSpyware
  • What is the brand and model of your keyboard?
  • You have a special keyboard installed, for example, Microsoft IntelliType software or "DellTouch programmable keys?
  • You have XP Home or XP Pro?  And what service pack?
  • You can also download and run The key Mapper to verify or reset the mappings of keys.

• When my computer goes into sleep mode, I have to press the power button to turn it back on.

  original title: sleep/hibernation

  When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

  Can someone tell me how to solve this problem, as if it was before?

  Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

  HTH,
  JW

• How can I make windows play a sound when you press the SHIFT key

  My keyboard doesn't have a light to indicate when it is capitalized. He used to play a sound, but it is more the fact after that I said not to do. However, when entering passwords that are case sensitive, it gives the wrong password. Can someone tell me how to re - turn on the sound.
  Its a Logitech MK320 wireless

  Look in Control Panel > accessibility, and then click "make the keyboard easier to use." Check the box "turn ToggleKeys. This will produce a note when you press the lock keys. Or just check the other box beneath it. In this way, you can turn the tone on or off without having to return to these settings.

  SC Tom

• Mouse Sonar: Registry key? Specify the location of the pointer when I press the CTRL key

  Windows 7 Home Premium 64-bit
  (But this feature existed for several years, at least as old as XP).

  In Control Panel mouse pointer Options tab, there is a checkbox option:

  [b] "see the location of the pointer when I press the CTRL key". [/ b]

  When this field is selected, pressing the CTRL key causes concentric circles around the mouse pointer, to help you find it quickly. HE often called mouse Sonar.

  I want to activate this option, but my mouse control panel does not have a pointer Options tab. I installed a mouse of third-party providers of hardware, software and drivers, and they hid the pointer Options tab. If I knew that the registry key for this option, I can activate it via regedit.

  Someone knows the active registry key or disables this option?

  This option is stored under this registry key:

  HKCU\Control Panel\Desktop\UserPreferencesMask
  However, it is coded to store several variables, and this direct modification is very far from a supported scenario.  You can try to install the Microsoft IntelliPoint software instead.

• My computer guess I'm pressing the ALT key. I even searched my PC for viruses, but nothing helped. I use windows 7 and an Acer laptop.

  My computer guess I'm pressing the ALT key. I even searched my PC for viruses, but nothing helped. I use windows 7 and an Acer laptop. Is there a solution?

  See re keyboard Acer support pages, will appear you have inadvertently the value of this option (or their forums) is not a win7 issue, but an Acer one

• I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8

  I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8. I have a toshiba laptop, and there is no switch on the side of my computer what is expected? Help someone?

  Hello

  My older Toshiba has a power switch WiFi.

  My new Toshiba has a WiFi switch above the F keys, although I do not know which varies
  by model. So check with Toshiba support, their documentation online and drivers, and
  ask in their forums where there will be others with the same model.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">