I have Windows 7 32 - bit PC running, using uTorrent I get the BlueScreen error

Similar Questions

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• I have windows 7 32-bit professional. It is said in the Activation status not available, product ID not available.

  I have windows 7 32-bit professional. It is authentic and for a few days I get the message that iI may have been a victim, and also the windows are not authentic. It is said in the Activation status not available, product ID not available. pls help

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  J W Stuart: http://www.pagestart.com

• I have windows vista and I had to use my recovery disk, but an error came as it ended. I tried to use the menu options of recovery but now she plays as if I had no drivers. What should I do?

  I used my recovery discs and some sort of error came. so, it has not fixed the computer. so I think that some how drivers were not loaded. However what seems to be a driver came when I press my f12 button to use the system recovery options menu. but I insisted on using it, and another box came to tell the software installation media or something to use to load the drivers. I also tried to use the Startup Repair tool restore and system by surprise that I have on an external drive listed under windows backup care but nothing has worked. I don't know anything else to do.

  1. Open the 'computer '.
  2. Right-click on the drive in question
  3. Select the tab "Tools".
  4. In the error-checking box, click .

  Well you can suffer the consequences of not running it who are often worse. CHKDSK found and try to
  repair disk problems, it does not really create them.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• Windows update fails to install KB2656368 and KB2686827. Get the code641 error

  Original title:

  Windows update fails to install KB2656368 and KB2686827

  I am running Vista Home Premium.  Windows update fails to install KB2656368 and KB2686827.  Download error code641 which seems to mean that Windows cannot identify the problem.  In the past, it was caused because the installer has been damaged.  In setting the Microsoft Support took control of my computer; Download a new installer and solved the problem.  However, it seems that there is no way of contacting Microsoft Support for them to fix the installation program.  The installation program be fixed right now.  Moreover, the tool "Fixit" said that everything is fine.

  Microsoft paid $99 for the support.  Tech uploaded a new installer.  Problem solved!

  Still wondering why the question about System Mechanic?

• Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

  Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

  Please see:

  Re: adobe photoshop cc 2014 has stopped working in windows 8

  Re: Photoshop CC 2015 has stopped working

  https://www.YouTube.com/watch?v=0OUdIZT7C2E

  I hope this helps.

  Concerning

  Megha Rawat

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• How to upgrade to windows 7 64 bit, when I have Windows XP 32-bit by using the version "upgrade windows 7."

  I had been using windows XP 32 bit before decide me get windows 7. I have read around and thought you could buy the "version upgrade of windows 7" and go for 32-bit windows xp to windows 7 64 bit. Unfortunately, when I got home to do a clean installation of windows 7, I received an error message when I put in the 64-bit and says that the disc is not compatible with my current windows. I called Mircrosoft and they told me that with the version of windows upgrade 7 "" you can't go from 32 to 64-bit, that I would need to get the full version of this one for $200 here in the Canada. Unfortunately, at this time, I have the product installed and running. I'm a bit disappointed in this light my 6 GB of ram go lose and not to mention my $120 I spent. So I wanted to know are another that blow $200 for full windows 7 and lose my $120 on the updated version, is there another method to get the 64-bit? Because at this point, I am at a total loss.

  You can go from 32-bit XP to Windows 7 64 bit by doing a custom (clean) install with an upgrade version disk.  You don't need to buy a full version disc.  But you can't start from the upgrade disk.

  I don't know what you have installed now.  If XP is installed, turn on the computer, insert the DVD upgrade after start XP and follow the prompts.  This method might also work if 32-bit Windows 7 is installed.  If not, maybe to re - install XP to start the upgrade.

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• I have windows vista 32 bit(x86) ie 8 and 4 dates they fail with code 8007371 b

  I continue to receive updates that are installed automatically and they don't install, failed code 8007371 b. The four dates at present are Ko 21179717, kb2505189,.

  kb2508272, Ko 968930 all with the same error code. I have Windows Update agent and it says: an error has occurred when trying to use it. I have windows vista 32-bit (x 86), IE 8.

  Can anyone help, thanks

  0X8007371B-ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  If the tool does not help, check the logs for more clues...

  Logging

  The system update tool creates a log file that captures any issues that the tool found or fixed. The log file is located in the following location:

  • %SystemRoot%\Logs\CBS\CheckSUR.log
  • %SystemRoot%\Logs\CBS\CheckSUR.persist.log

• I have Windows XP 32 bit and you want to get 64-bit Windows 7, how do I do this, 32-bit to 64-bit?

  I have Windows XP 32 bit and you want to get 64-bit Windows 7, how do I do this, 32-bit to 64-bit?

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (winodws.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  Go to the Toshiba support site and search page of your PC/computer laptop.

  Download and then install the last set of specific drivers for W7.

  See you soon,.
  Jerry

• If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  If I have windows 7 64 bit and I delete the folder program files (x 86) from my hard drive

  On Fri, September 14, 2012 03:06:02 + 0000, MerrellWilson wrote:

  It's 74GB and I used 73 GB

  Two points:

  1. If you want to delete some installed programs, do not make
  deletion of the folder they are in. That doesn't remove them only partially and
  can cause problems. Remove programs by in control
  Configuration/program Panel and features.

  2. a drive of 74 GB is a tiny disk these days. There are a number of
  things you can do to save space, but they are all basically
  temporary and you will soon find yourself in the same situation.
  The only real solution is to buy and install a larger capacity drive.
  Fortunately, they are very cheap these days; You can buy a 500GB
  drive for about US $65.

  Ken Blake, Microsoft MVP

• I have windows XP 32-bit. I am eager for the latest verson of lightroom.

  I have windows XP 32-bit. I am eager to the new version of the light, that I can get. Ive been told its 3.6 lightroom, is that correct?

  Also Im willing to rent the program $9.99 per month is also possible with this version?

  Hi candiceo,

  Lightroom 6/CC is the last and the most recent version that is not compatible with Windows Xp 32 bit operating system.

  The Maximum you can have Lightroom 3 on Windows Xp 32 bit operating system.

  You must update your system to use who praise the program for $9.99, because it will give the latest version of Lightroom (Lightroom 6 / CC 2015).

  It will be useful.

  ~ Mohit