I hear only left with 5.1 sound on Satellite P100 system

Similar Questions

• No sound on Satellite P100 with Linux

  Anyone who has heard the sound of intel is here - the sound card under Linux? I use the new kernel, vanilla, newet-alsa drivers. Distro - Gentoo.

  Thanks for the reply in advance

  Hello

  I do not exactly portable name but as far as I know the Satellite P100-306 supports a sound Codec chip Conexant CX20551-22.
  It is compatible with the specification revision 1.0 Intel high definition audio.
  I recommend looking for the driver that supports the properties

• How to get 5.1 sound on Satellite P100-286

  I had to replace my old P100-347 of 2 months, because of cracks on the hinge. The only model they had available was the P100-286. It is almost identical, except one thing, that I was not informed until I got it home and so too late to resume.

  Basically, the P100-347 had a SPDIF port and the 286 (as far as I can see), does not work. So, what I want to know is, what kind of sound that I am able to get the decision-making helmet.

  I plugged my Dolby Digital amp, and everything seems to be able to get is 2 audio channels, when I would be able to get 5.1 channels... In fact, I would like to have SPDIF, but don't think it will happen.

  Can someone advise and give me some advice on solving this.

  Thanks in advance
  Steve

  On the Satellite P100-286 S/PDIF port is not available and if you want to have 5.1 surround sound you need to use an external solution connected to the USB port. Google around. You will find quite different products, that you can use with your laptop.

• Virtual sound for Satellite P100-324

  Who knows where can I get a virtual to my laptoop (Satellite P100-324 PSPA6) sound, usually on C:\TOOLSCD\VIRTUAL SOUND\ support?

  I put t know why you ask something like that.
  As far as I know on the Satellite P100-324 the virtual sound is not installed and not supported.

• No sound on satellite P100 with Win7

  I've recently updated to Win7 ultimate but now get no noise and tried to update driver without success. I have a message in the bar by saying no audio output device is installed.he list of system in Control Panel it shows tasks "location 0 (internal High Definition Audio Bus, this device cannot start." (Code 10)) »

  Help please

  Post edited by: asiac

  What model P100 do you have exactly?

  You may need to use its Windows XP Win7 driver, depending on what sound Chip is on board.

• Strange problem with order of cursor on Satellite P100-160

  On my brand new laptop P100-160 with MS Vista Premium, I have an annoying error. Frequently, but without a reason, when I point the cursor on a command and press the touch screen go to the Maximum or to the Minimum size if it's to the Max, but the command is not executed. This happens on all programs, that is to say, words, Excel, games, etc.. I'm away from the United Kingdom and the store where I bought the laptop so resume the shop is not an option.

  Anyone else see this fault or can anyone suggest a solution?

  "It's not a bug, it's a feature!"

  Discover the taskbar when using the touchpad. There is an animated icon beside the clock touchpad. Click twice, and then on the top left device options and on the options again. There, you can spend some time and read about all the flaws of your touchpad - also how you can disable them.

  Have fun.

• DVD sound on Satellite P100 is not working properly

  For some reason, my sound DVD (on Satellite P 100-186) no longer works correctly. The sound is ignored and scraping.

  It has worked before and I don't know when it has stopped working. Any thoughts?

  Hello

  Maybe an update of the rather could be useful. But when you do, you should look at www.realtek.com for the manufacturer of the sound card driver.
  And you should seek the latest codecs which are probably most of the problems if it is not installed correctly. Maybe you need to install the codec pack k - lite (http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm) which is really good and covering the most need of codecs.

  Welcome them

• No sound on Satellite P100 - 400 PSPAG after downgrading to XP Pro

  Hi guys first post, so I hope someone can help me.
  I just downgrades the Toshy above from Vista Ultimate to XP Pro. I found all the drivers on the site of Toshy.
  Every thing is great except the audio driver... I Ceret do work or install?
  I have both versions of the pilot, but he says that he Ceret find media. It is a driver Conextant HD.
  Any suggestions would be great,
  Thanks milouze

  As far as I remember that this problem has been discussed a lot of time here in the forum.
  If you're going to cross categorize all laptops, you will find solutions to this problem.

  Recommend you the forum to check everything first before you post more specific questions.

  PS; Use the Toshiba Advanced search forum!

  Good bye

• Only 1 hour in the battery of Satellite P100 - 429!

  I have two Tosh P100 - 429 portable Satellite purchased about 3 months apart. Two of them do not take their energy from the battery for more than an hour. I tried to run down the battery and full charge several times, but still this problem.
  Everyone knows about this problem?
  What is the normal duration of the battery lasts, said spec 2.5 hours.
  Thank you
  Stu

  Battery working time depends on the use of the laptop! Please don t forget!
  All power needs; Graphics card to disc, CD/DVD, HARD disk

  If you run some applications of high performance battery power will be increased.
  Are you using Vista?

  Vista is wasting the energy of the battery! He needs a lot more power because the Microsoft OS initially as XP Pro or MCE.

  So please don t confuse ;)

• System Recovery works do not with my Satellite P100

  I followed the instructions I saw on many sites to be able to do a system restore to 'out-of-box"State. I've maintained pressed zero and hit the key on and then release the zero key when I hear the beep. After that it only gives me the possibility to proceed to the recovery of the system. It starts just as usual.

  What I am doing wrong?

  Hello Shae

  How to start now? OK Let's ' s go!

  Toshiba recovery procedure can be done with recovery CD/DVD or facilities using images stored on the HARD disk. Image stored on the HARD drive will be offered with the new notebooks only and I am sure that your Satellite P100 is delivered with a CD/DVD media and not the HARD drive recovery option.

  AFAIK this option 0 is for HDD only installation. Please note that this option 0 is not also for all Toshiba laptops. For European books, you can start installation disk with F8 and not 0.

  I hope you understand how this works now. The question is what P100 you have exactly and how you are trying to install OS? You want to use Toshiba Recovery CD/DVDs?

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• System only through headphones - no music sounds. BUT... the music only through USB speakers. No system sounds. What is happening with this?

  I listened to the music on my computer through headphones regular plugged into the audio jack of 3.5 mm.  I could hear the computer through headphones - music, movies, YouTube, system sounds - everything.

  Then, I plugged my Microsoft Digital Sound System 80 speakers via the USB interface.  Windows XP found the speakers, loaded the right driver, gave me the message "your device is ready to use" and things started to play music that was running on the computer.  Sounds incredible.

  But now, I have a weird problem.  I can hear only the sounds system through headphones (beeps and dings that play during system events), but I can't hear the sound system on the USB speakers. AND... I can't hear the music/videos/YouTube, etc. on the speakers USB-interface, but I can't hear the sound system through the USB speakers.

  When I go to the audio tab of the sounds applet in the control panel and change the device for audio playback by default "SoundMAX HD Audio" to "Microsoft Digital Sound System", then I hear everything - system and all - sounds on USB speakers.  But then I hear anything through the headphones.

  I want to be able to Exchange music back to making the USB speakers.  How this is done?

  Yes, they are older speakers.  But they work a lot.  And the digital sound via the USB interface is excellent.

  Hi BitSpanker,

  The only option is to change the audio device by default for the device that you want to hear the audio.

  (a) click Start, click Control Panel, and then click sounds, speech, and Audio devices.

  (b) click on sounds and Audio devices, and then click the Audio tab.

  (c) in the sound playback section, under default device, make sure the audio device is the correct default audio device.

  (d) If this isn't the correct default audio device, click the drop-down list next to the device name, click the audio device you want, and then click OK.

  Change the audio device may require that restart you your computer.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Updated and now the phone won't work online only works with 4G

  Download ios 10 and now my phone does not work online only work with 4G

  Hello thomas.friar,

  Thanks for asking for help with your iPhone to connect to the internet via wi - fi since the upgrade to iOS 10. We don't like to hear about the problems that occur after an upgrade. Here's what I recommend.

  The first thing we want to make sure that all of your data on the Mac and the iPhone is safe. For iPhone, you can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Then, follow the steps in this link: If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  Thanks again and have a great rest of your day.

• No sound in Satellite Pro P200 with XP

  Hi all.

  I have a Toshiba Satellite Pro P200 with Windows Vista preinstalled. I removed Vista and installed Windows XP with Service Pack 2, due to the incompabilités with some software I need. Almost all of the necessary drivers for XP (even a downgrade to BIOS) was downloaded and installed from Support from Toshiba web page. But there are still two devices that I can not install. At the start of my laptop it always detect "* Microsoft UAA bus driver for high definition audio *" and "* controller memory PCI - Chip for logical Cache Flash in Intel (r) *" as new hardware and they appear marked in yellow in the Device Manager list.

  I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  I googled a lot, searched this forum and called technical support, as I said, but I've not found a way to solve these problems. Really, I can't believe I bought a laptop that only works with Windows Vista, I resist assume this idea, so I continue to try and try to make it work properly with the operating system that I need and I have chosen freely.

  Any idea?

  Thanks in advance.

  Hello

  > I installed the last bus Microsoft UAA for high definition audio driver for XP from Toshiba and Realtek too... a lot of time and in different ways... Previously I installed the High Definition Audio Driver Package - KB888111 from Microsoft. But I still have no sound.

  You're on right way boyfriend, you must also install another patch MS; KB835221
  So finally the KB888111 and KB835221 must be installed before you will follow with the audio driver installation.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  > PCI memory controller - Intel(r) Flash Cache Logic Chip: the same... tried the drivers the most recent Toshiba one Intel too. Toshiba technical support told me that this unit is ready to run on Vista and have suggested me to try with Robson drivers for Vista Support from Toshiba's web page, but that didn't work either.

  The problem is that this unit only works in Vista.
  The controller memory PCI is that intel Turbo Memory, also called Intel Flash cache logic chip also called device Robson.
  It's quite new technology designed to support the new features of Vista.
  There is not driver for it for Windows XP because XP doesn t supports the function of cache, it is supported by Vista.

  Hope I could help you