I installed SP3 but WinXP Pro still does not recognize my 250 GB HARD drive. He returned to only 127 GB. Y at - it a patch or a patch that will fix this?

Similar Questions

• WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

  WinXP Pro 2008 does not recognize my computer drivers & load the drivers of standard system of 2001; Impossible to upgrade

  then load systemroot, I don't want systemroot, also charges 3.1 drivers, 95, 98. 2000 & winnt 3, 4, 5 &

  Sometimes it runs under DOS only & sometimes not

  I don't want to network & sharing, because there's someone attached to my system & load malware {pirate just deleted} & takes control so I'm at work & then interupts me online with flash & js causing anomalies onscreen, resumes also connection & homepage.

  Now my Norton is denied access (& other programs) & I can't use it

  Suffered disc & reworked several times, I tried the sharding & partitioning is not on all COMPUTERS

  This pirate has done this for 12 years, 7 computers & 5 operating systems.

  SOMETIMES HE TAKES CONTROL OF MOUSE & KEYBORD. YOU SHOULD SEE MY CDROM CONTROL CD ABNORMALLY.

  This is clearly abuse & I am at my wits end! Help me get rid of this danger, please

  but hidden.
  Try this, go to disk management (Control Panel, administrative tools, computer management).
  They appear here? If so, you may need to reassign a drive letter for them.

  If not, look in Device Manager, they appear in red/yellow or is there any "unknown devices"?

  Windows cannot have the drivers either, so you can download the drivers from the manufacturers Web site.

  1. start the computer.
  2. press F8 repeatedly to display the start menu.
  3. Select safe mode in the start menu.
  4. right - click on "my computer".
  5. Select Properties.
  6 select the Hardware tab.
  7. click on the button "Device Manager."
  8. click on the (+) plus sign next to CD/DVD players.
  9. right click on each component and select uninstall
  10. follow steps 9 to all components under this category.
  11. restart the computer.

  It must reload the drivers for the CD/DVD drive.
  or

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00619385&LC=en&cc=us

  check on this site how to connect dvd cd players

  I tried the following to help resolve the problem:
  1 attached Mouse, provided power but does not recognize the device. Assistant add hardware does not yet come upward.
  2. 3 readers USB flash, in every port and they were not recognized or attached.
  3 uninstall all devices of USB root hub and rebooted. No change.
  4 uninstalled all the USB controllers and restarted. No change.
  5 install a logitech mouse driver that is the same as the mouse installed. The mouse has not always recognized.
  6 re-flashed the BIOS. No change
  7. utility of diagnosis of Dell Ran and no problem found with the controllers or the USB ports

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Satellite A55-S106 does not recognize the 160 GB HARD drive

  I replaced the 60 GB IDE HDD in my laptop Toshiba Satellite A55-S106 with a 160 GB one of Western Digital.

  I've restored a Ghost 10 image to the new drive on a hard disk external. The computer still recognizes only 60 GB. Belarc and HD Tune to see a 160 GB drive, but show the volumes as being only 60 GB.

  Disk management Windows show 93,16 GB as unallocated.
  I am running Windows XP SP3.

  Someone at - it ideas? The BIOS can be crippled somehow? I can't find anything in the BIOS that seems to address hard drive size.

  I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow? Here I used the original recovery CD to recover everything first and then restored the Ghost image?

  I put a 160 GB drive in an old 1999 Dell desktop running Windows 98 and no problems like that. It is hard to believe that a laptop from 2005 would have this problem. It is, however, my first attempt at using a version of Ghost Windows hard drive recovery.

  > I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow?

  Yes, I suppose the HARD drive was not formatted in NTFS file format.
  This is why I would recommend booting from original Toshiba Recovery CD and then check if the HARD drive has been recognized correctly!

  Please check first!

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards

• XP does not recognize a second IDE hard drive.

  Summary:
  Added a PATA IDE drive so both are on the same cable.

  System information:
  IBM ThinkCentre P4 2 .66GHz (bought in 2005 approximately)
  Upgraded RAM from 1 GB to?, pin DIMM 184 form factor.
  Hard Drive IDE 1 x 40 GB - Standard - ATA-100-7200 RPM.
  Genuine XP; SP3 downloaded and installed by me.
  MT - M 8187-WBK S/N: KCGL5NB
  8187 is a type for a M50 number.

  My assumptions of hard disk:
  It is Setup to have a disk of expansion under the DVD with separate IDE cables and no doubt when both these are used you are in a primary + secondary situation.  I think that I am looking to get a configuration 'Double' where both are on the same IDE cable.

  Action:
  Removed the floppy drive and put the old HD in its place; It is the primary IDE hard drive.
  Put the new HD located under the old and attached the new cable at the same time.
  Use the power connector of the DVD on the new drive; I could so far to an extension of the extra drive Bay.
  I checked the BIOS boot menus, but could not see anything that needs to be changed.

  Problem:
  The system shows no signs of the new command.
  It still shows the floppy drive.

  I hope you can help,
  Peter

  USB is not supported, and even if that were the case, put the file on a USB drive would significantly reduce the performance of Windows.

  To speed things you can locate the swap file on a separate partition (should be the first partition, about 10 GB is more than enough) on a second hard drive.

  J W Stuart: http://www.pagestart.com

• Tecra M9 - does not recognize the 320 GB HARD drive

  Hello @ all,

  I tried to install the HARD drive, but it seems to be not recognized by the BIOS. Any chance to get this problem resolved?
  With Acronis Disk Man. I get an error message: No. HDD installed!
  BIOS version is 1.80, HARD drive is a Seagate ST9320421ASG (Momentus 7200.3 320).

  Thanks in advance

  Hello!

  Have you tested the HARD drive in a laptop or in an external enclosure? Maybe it s faulty.
  Or you test another HARD drive in this notebook.

  Normally a 320 should work in Tecra M9.
  There is a new version of the BIOS on the Toshiba, but I doubt that the problem of the article, but try to update.

  Good bye

• my computer does not recognize the WD external hard drive

  I use WD My Book external hard drive in my laptop (Vista) DELL for extra storage space. But all of a sudden I don't see in my computer!

  When I looked at , , info., (in addition to the "OS" & "Recovery") I saw "'unknown disc', so I tried see its properties by right-clicking, then I saw"WD My Book external hard drive"name in it and she said"working properly "; but when I played with it, I must have done something wrong, this name of 'unknown disc' missing from the list in my computer. How can I make my WD get work again?

  Hello

  Thank you for posting.

  I suggest you to contact the manufacturer of the device. They should be able to help you.

  Check out the link

  http://support.wdc.com/?wdc_lang=en

• Vista does not recognize the 640 GB hard drive

  How can I get Windows Vista to recognize my Western Digital 640 GB with 640 GB hard drives instead of 596?

  On Friday, June 11, 2010 21:35:17 + 0000, Freebird-52 wrote:
   
   
  > How can I get Windows Vista to recognize my Western Digital 640 GB with 640 GB hard drives instead of 596?
   
   
   
  Sorry to tell you that everything you have * is * acknowledged. Although
  you think you have a 640 GB drive, you actually have a 596 GB disk.
   
  All drive manufacturers qualify hard 1 GB 1 000 000 000 bytes, while
  the rest of the computer, including the windows world, defines it as 2 to
  the 30th power bytes (1 073 741 824). So is a disk of 640 billion bytes
  actually about 596 GB.
   
  To some people pointed out that the official international standard defines
  the 'G' of GB as 1 billion, not 1 073 741 824. Correct if they
  are, using the binary value of GB is so well established in the
  World of computing that I consider using the decimal value of 1 billion of
  be misleading marketing.
   
  There is more information on this here:
  http://GadgetWise.blogs.nytimes.com/2009/07/06/q-a-decimal-and-binary-measure-vs-measure/?partner=RSS&EMC=RSS
   
  or http://tinyurl.com/m9mv37
   
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Satellite 1800-712 does not recognize my USB external HARD drive

  Hello

  I would really appreciate the help. I own a satellite 1800-712. I have receently bought a usb external hard drive for some extra memory (IE Toshiba MK4026GAX USB Device)

  When I connect it to my usb port it records any with the computer. The green light so there is power to the hard drive. The usb ports recognized of other fine features (a modem and memory stick)

  I tried the external hard drive on a desktop pc and it works fine.

  I have downloaded all windows xp service pack updates and updated my bios. Don't know what to do now.

  Please help and thank you in advance!

  Hello

  Although sometimes, I know that the OS is not able to recognize the external USB device, because the device external USB (HDD) consumes more energy than the 500mA.
  The USB ports provide 500mA power and if the device needs more power so it s is not possible for the Windows operating system to recognize the external device.
  You have an external power supply for the USB HDD? You should use it.

  Good bye

• My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

  Hello

  It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.

• HP keyboard model kg-0851, I tried all the steps from hp, but the keyboard still does not

  I tried all the steps from hp, but the keyboard still does not.  When I look at the Device Manager, it says that it is fine.

  Hello

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?
  3. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

• Downloaded Camera Raw plugin 9.1, but 13 elements still does not allow me to open the raw files from Nikon D750

  Downloaded Camera Raw plugin 9.1, but 13 elements still does not allow me to open the raw files from Nikon D750. Why?

  Did you install that you downloaded?

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive?

  My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive? He has already done this, but even when I run back to an earlier date, it does not work. FixIt identified the disc as work, but there must be something missing the program of My Documents.

  Hello

  What program are you using to burn CDs?

  Follow the steps in the link below and check:

  http://support.Microsoft.com/kb/324129

  It will be useful.