I installed windows 7 update disk 64 Edition family everything has worked until I installed the companion disc

Similar Questions

• Im trying to install Flight Simulator, everything goes fine until I put the 2 disc in, it comes up with the error number: 0 x 80040702 and ends the Setup program! What should I do

  Lenovo Z570 Windows 7 64 bit

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the question, I understand that you have problems with the installation of Flight Simulator on Windows 7 computer. I will certainly help you in this regard.

  This problem can occur is the facility can't seem to load the DLL: GameuxInstallHelper. I suggest you to refer to the help article and check if it helps.

  Error message when you try to install a Microsoft Games for Windows game: "could not load the DLL: GameuxInstallHelper.

  http://support.Microsoft.com/kb/968365/en-us

  Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

• Hello, I currently windows 7 Home premium 64-bit running on my laptop, can I install windows 7 ultimate 32 bit over this as an upgrade? I have the ultimate disc then, how do I use it? Thank you, Mark.

  I am running windows 7 Home premium 64 bit on my laptop. I have a disc of windows 7 ultimate 32 bit, is it possible to upgrade to the ultimate disk, if so, how, if not how do I use the ultimate disc? Thank you very much, Mark.

  No, you can't, but if its Windows 7 Ultimate you want, simply use the Windows 7 Ultimate product key to upgrade Windows 7 Home Premium to Windows 7 Ultimate using Anytime Upgrade.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

  Cases of failure to upgrade Express:

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I install the first disc of Photoshop CS2, but then I can't install disks 2 and 3

  I install the first disc of Photoshop CS2, but then I can't install disks 2 and 3

  If you copy the contents of the drive in a desktop directory, you could install, BUT you will not be able to activate.  use the files downloaded from

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Silverlight will not install on my computer. I get an error code 659. Silverlight has worked on computer at the same time. Vista in Home Office business management.

  Silverlight will not install on my computer.  I get an error code 659.  Silverlight has worked on computer at the same time.  Vista in Home Office business management.  Can someone help me with this issue?  I installed Vista service pack 2.

  johncoxcpa,
  Well looking at the log you've posted, I came across this article:
  MSI (s) (2 c: D4) [22:29:29:073]: sequence number number for this installation system restore.
  This installation is forbidden by system policy. Contact your system administrator.
  c:\c17e5b6672c37d9f685b\Silverlight.msi

  So it seems that if your system has a software restriction policy installs.  You need to contact your IT Department. to learn about the changes to the policy will be to install Silverlight.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A virus deleted my windows\repair to xp media edition sp3 directory. How can I return the repair folder?

  I have a gateway xp media edition with sp3.
  Had a bad java/feat virus and it deleted my C:\windows\repair folder.
  Cannot find my recovery disks. Is there a place of Microsoft
  can I download the file directory? If not, is it possible to copy the repair
  Directory of any xp cd to replace my missing?

  Thanks for any help you can provide.

  Hello

  ·         Are you able to start on the computer?

  ·         You get the error message?

  ·         What anti-virus program do you use?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

   

  I suggest you install the latest anti-virus Microsoft Security essential on the computer program and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If you have Windows XP CD you can try to check and scan of System File Checker running if this can help.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• I have two error codes on Windows update Code: 80240016 & an internal error has occurred in Ox80010108 during the installation of Service pack 1.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Click here to show or hide detailed information

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 how to obtain the latest Windows Vista service pack

  968849 how to obtain the latest service pack for Windows Server 2008

  Solution 2: Run the system update readiness tool

  Click here to show or hide detailed information

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  Collapse this includes this image

  .

  2. in the Search box, type System, and then click System in the programs list.

  Collapse this includes this image

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  Collapse this includes this image

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  Collapse this includes this image

  Download the update tool for Windows Vista x 64 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.

  Collapse this includes this image

  Download the system update for the systems Itanium (KB947821) package.

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads

  For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:

  947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  a. right-click on the icon of the third-party program.

  b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.

  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.

  Resolution 4: Uninstall security applications, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.

  You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.

  If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, click Start

  Collapse this includes this image

  .

  3. in the find what box, type programs.

  4. click on programs and features.

  5. click on the name of the security program that you want to uninstall.

  6. click on Uninstall.

  7. After you have uninstalled the program, restart the computer.

  8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
  Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.

  9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.

  * All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!

  Get help the community?

  Hello DavidCarmichael,

  Thank you for your message.  I see that you have already run the system update readiness tool.  Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the results of each utility.  We can't wait to hear back on your part.

  See you soon

• Windows Update will not start work until I run the update utility.

  Original title: Windows 8 - Windows Update

  I have a desktop with Windows 8.  Pre-installed - computer is 1 year.

  Whenever I run my Windows Update to download/install updates - it always shows as downloads but it comes in fact does nothing and just "of the acts' as is the download but nothing happens.  Then I run the windows update convenience store (in Control Panel) and he told me that the problem is "fixed".  So I run windows update again and it works.

  But the next time it's the same thing as above - doesn't work - run the troubleshooter, and then it works.  I need to run the troubleshooter and to resolve the problem, almost everytime before the windows update will work.

  How can I get a permanent fix?

  Hello

  I suggest you follow the steps in the link below. Chose Windows 8 option from the menu drop down to follow the correct steps.

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  http://support.Microsoft.com/kb/947821/en-us

• I have just updated to windows 10 and I have no sound, everything else works fine

  I have no Audio, sounds or volume afte the update/upgrade of Windows 10. This is NOT the case yesterday when I don't have Windows 10 update/upgrade in my laptop Vaio from Sony. Everything works very well, is to take a mouse of logitech usb among other things. My Audio jack does not work for headphones will not do. I found an old usb headseat PS3 seems to work, according to this logic, a set of usb speakers would do the same thing. If you have a HD cable you can connect your laptop to an HDTV and use the TV speakers. What can I do to solve my audio problem?

  Go to control panel > system and security > system and to the left, click on advanced system settings. Once there, go to the Advanced tab, and under performance, click settings. Then, click on the Advanced tab, and under virtual memory, click on change. Now, I did uncheck automatically manage it paging file for all readers size and check again, but if this does not work I heard uncheck automatically manage paging file for all readers size and selecting size made on order and set the initial size and maximum size to 3072 should solve the problem. I hope this helps!

• 2 windows xp hard disk systems, then I remove one without doing damage to the other?

  I WAS INSTALLING WINDOWS XP ON A NEW HARD DRIVE.  HE SEEMS TO HAVE STOPPED WORKING.  I RESTARTED THE INSTALLATION. NOW I HAVE 2 OPERATING SYSTEMS ON MY COMPUTER;  HOW CAN I REMOVE WITHOUT DAMAGING OTHERS.  DON'T WANT TO REFORMAT AND START OVER AS I HAVE AN OLD DIAL UPWARD OF CONNECTION AND IT TAKES TOO MUCH TIME TO REINSTALL EVERYTHING.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support

• Cannot install the companion Xperia

  I downloaded the installer of Xperia companion here

  http://support.sonymobile.com/global-en/tools/Xperia-companion/

  But when I tried to install it, it gives an error

  "The procedure entry point not found setDefaultDllDirectories in KERNEL32.dll dynamic link library."

  See the image

  

  I tried the sfc / scannow option too. But it did not solved the problem.

  Previous updates of the companion of Xperia installed successfully. This has happened in the new update. I had the Xperia companion installed before the entry of the new update. After the new update notification came, I downloaded the new update on the Sony site, then I deleted the old version and then tried to install it. But this error comes.

  My computer is Windows 7 Ultimate Service Pack 1

  He has all the requirements.

  Welcome
  This problem happened to me, and after a long search, we found the solution
  1 - this link... chose him to your operating system

  2 - https://support.microsoft.com/en-us/kb/2533623

  

  3 - KB2533623 download file
  4 set up KB2533623
  The program recognizes the device and the end of the problem

  Concerning

• After the last update, everything has much too big for the screen

  After the update everything was too big for the screen. I can't have enough on the screen to play a game even. I revert to a previous version and it was ok, but once again when the update went thru it's still too big. I tried to check and he said: I'm always on the 96 dpi.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Installed the wrong disc

  I have installed disk 1 on my Windows 7 Professional 64 bit system by accident.  What I then do to remedy this?

  I solved the problem by uninstalling the 32-bit version of Photoshop Elements 10 of Panel and reinstall using disc 2.  The documentation is vague and does not immediately the fact that installing the 64-bit version begins on the 2nd disk.  I discovered the difference when you read the fine print on the CD.

• I think that I need a Windows emulator for my history of family progams. Can I go to the apple store to get them to do?

  I have a good memory of the decent apple laptop computer and quite fast, I love him but family history programs don't. I made mine and research other trees of the family for more than 40 years so I have a lot of data. I use Family Tree Maker and even with the Mac version, it has been a little reliable especially as the internet often disappears and I turn it works all the time. This isn't one problem for others in the home or other programs. The Family Tree Maker for Mac has been known to be the problem some. With recent developments with abandonment of Family Tree Maker, I am motivated to fix my problem. Should buy an emulator of widows and back to my trusty roots Magic or cut my losses and get a new windows laptop, that would be a tough act to follow for my Mac with like for like. It will complicate my other programs

  To run Windows on a Mac have two choices, but for each choice, you still have to buy the Windows operating system:

  -Use Boot Camp from Apple. It's free

  https://help.Apple.com/Bootcamp/Mac/5.0/help/#/bcmp173b3bf2

  It is not the easiest to install

  -Use a virtual machine as the free VirtualBox or paid Parallels. Very easy to install but Parallels is easier to install and use.

  A virtual machine should be fine for your application.