I just win8 and cannot do things as I could before - fb apps, online shopping, etc., don't function right. run ghostery, noscript, adblock and donottrackme.

Similar Questions

• Cannot print just black and white - cannot print all black when a low cartridge

  I had this 6700 Officejet just long enough the warranty has expired. Go figure. I have 2 problems.

  1. from my PC, it will print not just black and white, even if I chose "printing black and white only. I have to go through the whole syetem of dialogue ect ect, which is delayed. It prints perfectly just black and white of my portable Macbok.

  2. it won't let me print a document all in black and white, because I have a low color cartridge. Whey do I have to have color cartridges to print just a black and white document. Very annoying and frustrating. I'm almost ready to use as target.

  Hi fpsolutionsllc,

  Welcome to the Forums of HP Support! I understand your frustration and want to enlighten us and also bring some answers to your questions about the ink on your HP OfficeJet 6700 systems.

  1. you are able to go to your printer properties and change your settings for printing in black and white only, without having to change it whenever you want to print something. See the steps listed below:

  * Go to your devices and printers

  * Right-click on your 6700 and select Print Options

  * Select your desired default and press Ok

  2. you cannot print without all cartridges installed because even if printing black and white printer will still use the ink contained in the cartridges of color for maintenance tasks. It takes little ink from all cartridges in the service of the print head and avoid any clogging. To get a better understanding of take a look here: use of inkjet printers ink.

  I've found this useful information here: a 'ink alert' or "Low on ink" Message appears on the computer or the printer control panel

  Thank you

• Is there independent configurations, or just that kind of creative things Cloud with monthly cost? I tested the Lr5 before trial and now wishes to purchase the full version, but not interested and won't pay a monthly fee for it. All the opti

  .. .and the same thing here, I apparently just typed in the header...

  Is there independent configurations, or just that kind of creative things Cloud with monthly cost? I tested the Lr5 before trial and now wishes to purchase the full version, but not interested and won't pay a monthly fee for it. The options seem to grow the CC, but would like to know if there is any means possible to get the version stand alone more. Thank you in advance!

  Frustration is closer...

  There is still an option purchase on https://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softwar e_sl_mostpopular.html

  Make sure you only select between upgrade/Full and Mac/Win.

• I just remdered and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  "When I try to open this file and start a new project using tha the intro file, I get an error.

  I just made and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  When I try to open this file and start a new project using tha the intro file, I get an error "the file is not a supported file or codex is not installed.  How can that be, I made the file using this program and he does'nt recognize files it creates?  Please advise... Thanks /.

  grethell

  What version of Premiere Elements you are using and on what computer operating system is running?

  You cannot import a project file (.prel) in another.

  For now, generalize choice

  a. export your Timeline (your intro) content to a file saved on the hard drive of the computer. And then import that

  file in new projects by using the new project add Media/files and folders. See publish + Share/computer/and the other

  choices here to generate this file intro for later use in other projects.

  b. you can set up what is called a dummy projects - this is a project with nothing other than the intro file. And, at all times

  you want to use the intro, you open one of these saved dummy projects and add your media sources.

  A lot of things to discuss. Please fill in some details more and then we can refine the answer for your particular situation.

  Thank you.

  RTA

• How to remove "My Web Search" toolbar just published and where it comes from?

  How to remove "My Web Search" toolbar just published and where it comes from?

  You have installed something that is considered to be spyware/malware/adware. To see the Plugins reported with your question, click on "+ system details...". "to the right of your original question or, in the menu of Firefox, click Tools > Modules > Plugins.

  • My Web for Windows 32-bit Search Plugin heel

  This type of pest is usually installed as well as software that you download on the internet. programs, generally free, but not always. Watch carefully for 'extra' items that will be installed and uncheck or opt-out of them.

  1. "You can check if you have one of these of Web products ' installed:
     • Control Panel > Add / Remove Programs, click on any you find and click on 'Remove': My Search Bar, Accelerator MyWay, My Web Search Bar, Bar of Ask.com , Fun Web products Easy Installer
     • See:
       • http://www.safer-networking.com/removemywebsearch.php
       • PC Hell: My Web search removal Instructions
       • http://helpint.MyWebSearch.com/intlinfo/help/toolhelp.jhtml#Q3
  2. See also: http://kb.mozillazine.org/Uninstalling_toolbars
  3. You May need to change a preference if type one or two words in the URL/address bar when you send to a page other than the research that you expect. To reset your default URL/location bar search engine:
     • Enter Subject: config in the URL/address bar and press the Enter key
     • If you see a cautionary, accept it (promise you'll be careful)
     • Filter = keyword. URL
     • Under the filter, if keyword. URL is "BOLD", right click on the key word. URL and choose "Reset".
     • Restart Firefox (file > restart Firefox)
     • See: http://kb.mozillazine.org/Keyword.url
  4. You May need to reset your home page if some search page that you do not want or do not open when you launch Firefox. Firefox can open multiple home pages. Home pages are separated by the ' | ' symbol.
     • See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Other issues that need your attention

  The information provided with your question indicates you have outdated plugins with known security and stability issues that need to be updated. To see the plugins submitted with your question, click on "+ system details...". "to the right of your original message of the question. You can also see your plugins in the Firefox menu Tools > Modules > Plugins.

  • Adobe Shockwave for Director Netscape plug-in, version 10.1
  • Adobe PDF plugin for Firefox and Netscape 8.2.6
    • Very old version. You may want to delete/uninstall in Control Panel > Add / Remove programs before installing the new version.
    • The current versions are the 10.0.1 and 9.2.4
    • Info on version 10:
      • New Adobe Reader X (version 10) with protected Mode was released on 11-19-2010
      • See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
  • Shockwave Flash 10.1 r102
  • Next-generation Java plug-in 1.6.0_22 for Mozilla browsers
  1. Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
  • Note: plugin check page lacks information about all versions of the plugin
• Update to Shockwave for Director
  • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
  • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
  • When the download is complete, exit Firefox (file > exit)
  • Locate and double-click it in the installer that you just downloaded, let the complete installation.
  • Restart Firefox, and look at your plugins.
  • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
• Update of Adobe Reader (PDF plugin):
  • Within your existing Adobe (If you have already installed) drive:
• Open the Adobe Reader program in your list of programs
• Click Help > check for updates
• Follow the instructions to update
• If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • "Use the links below in order to avoid the painful' getplus" Adobe Download Manager and other 'extras' you do not want
  • Use Firefox to download and SAVE the installer to your hard drive for the appropriate link below
  • Click "save to file"; Save to your desktop (so you can find it)
  • Once the download is complete, close Firefox
  • Click on the installation program, you just downloaded and allow installation to continue
    • Note: Vista and Win7 users need to right click on the installer and choose "Run as Administrator"
  • Download link: ftp://ftp.adobe.com/pub/adobe/reader/
    • Choose your operating system
    • Choose the latest version of # .x (example 9.x for version 9)
    • Choose the version the most recent number
      • NOTE: 10.x is the new Adobe Reader X (Windows and Mac only from this announcement)
    • Choose your language
    • Download the file, save it to your hard drive, when finished, close Firefox, click on the installation program you just downloaded and let it install.
    • Windows: click on the .exe file. Mac: click on the .dmg file
• Using one of the links below will force you to install the "getPlus" Adobe Download Manager
. Also don't forget to uncheck the McAfee scanner if you do not want the link force installed on your desktop computer
• See also the download link': http://get.adobe.com/reader/otherversions/
• See also: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for download, you can get the painful 'getplus' Manager to download from Adobe (Adobe DLM) and other "extras")
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers.
    • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
    • Note the separate links for:
      • Plugin for Firefox and most other browsers
      • ActiveX for IE
• Update the Java plugin to the latest version.
  • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
    • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.


• See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
• Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
• Remove several extensions of Console Java (if required): http://kb.mozillazine.org
• Java test: http://www.java.com/en/download/help/testvm.xml

• How to clone disk HARD of backup/restore for ideapad with pre-installed win8 and recovery button work?

  Hi all

  I recently bought a y510p ideapad. It came with pre-installed win8, and I have no recovery CD. I intend to play with linux on this laptop, but do not want to lose win8. So before I have potentially immediately reformat, I think to make a copy of clone of my HDD on an external USB drive. The general plan is like that,

  1. make a copy of mobile on external USB HARD drive

  2 mud with linux - and foolishly autour reformat the entire process

  3. have fed up with linux and want to return to windows

  4 copy of retrospective data from usb driver external HDD latop

  5 return to the comfort of win8

  With the help of this tool (clonezilla) will work in the above scenario?

  http://www.MakeUseOf.com/tag/free-advanced-hard-drive-cloning-solution-from-Clonezilla/

  If not, are there any other alternatives (free if all goes well) I could use?

  My intention with the backup, is that after that I have 'restore' things, "a key recovery" button should continue to work as before.

  -Abraham V.

  AbrahamV wrote:

  Hi all

  I recently bought a y510p ideapad. It came with pre-installed win8, and I have no recovery CD. I intend to play with linux on this laptop, but do not want to lose win8. So before I have potentially immediately reformat, I think to make a copy of clone of my HDD on an external USB drive. The general plan is like that,

  1. make a copy of mobile on external USB HARD drive

  2 mud with linux - and foolishly autour reformat the entire process

  3. have fed up with linux and want to return to windows

  4 copy of retrospective data from usb driver external HDD latop

  5 return to the comfort of win8

  With the help of this tool (clonezilla) will work in the above scenario?

  http://www.MakeUseOf.com/tag/free-advanced-hard-drive-cloning-solution-from-Clonezilla/

  If not, are there any other alternatives (free if all goes well) I could use?

  My intention with the backup, is that after that I have 'restore' things, "a key recovery" button should continue to work as before.

  -Abraham V.

  Make the plan will cause OKR is not functioning properly. To prove this to get a hard drive of exact size and make a clone of hard disk of the device. Remove the hard drive from the unit and place the disc clone hard inside. You can now play with the disk hard clone to your hearts desire but OKR first test if it still works. Even if OKR no longer work, you can proceed with the installation of linux. Once you're disgusted with Linux everything you have to do is replace the hard disk clone with the original hard drive and you're back to win with OKR 8 still works.

• Why can't just open and use files Z5 for a text called 'The Theatre' adventure game?

  I'M in TRAIN OF DOWNLOAD AND USE FILES/PROGRAMS to PLAY TEXT ADVENTURES ESPECIALLY ON CALLED 'THE THEATRE' [A TEXT ADVENTURE USING A z5 FILE HAD each time I HAVE TRIED TO OPEN AND RUN IT I KEEP GETTING THE MESSAGE WINDOWS don't IS NOT RECOGNIZE this TYPE of FILE. ANY HELP PLEASE.

  To simplify things, download and install the Windows version of
  http://www.ifarchive.org/if-Archive/Infocom/Interpreters/Frotz/WindowsFrotzInstaller.exe

  I just tried and, once installed with all the default options, you can double-click a .z5 file to launch the game and interpreter.

• My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

  I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

  • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
  • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
  • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
  • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
  • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
  • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
  • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
  • When I click on startup repair: it says "Startup Repair could not detect a problem.
  • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
  • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar.

  I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar. I managed to go into the live account and change the password, so I know that the connection details are correct. I can access my hotmail account.

  I signed up for skydrive two days ago and have loaded the documents that I cannot now reach!

  original title: skydrive connection problem

  Forum on SkyDrive here:

  http://windowslivehelp.com/product.aspx?ProductID=6

• What is the best/best way to get just Photoshop and first applications?

  Hello Adobe community.

  I'm curious the best about the ideal way to get just Photoshop and first. I have currently the library full of Adobe applications, and I noticed that I don't use the majority of the applications outside of these two. My subscription of the year ends in November (thank you for Black Friday deals). I want an idea of some of the things that I can do to save money and get the best value for both applications as the price of subscriptions is a little strange.

  After watching the price of subscriptions and their descriptions, is logical that the best option I have is to get the Plan of Single-App creative cloud for first ($19.99 per month) and also opt it for the Photoshop & Lightroom Plan ($ 9.99 per month)?

  The price, I was looking at: plans membership: pricing and subscriptions | Adobe Creative Cloud

  I appreciate any help I can get. See you soon!

  If you want these two programs (Lightroom does bundle special photographer, but there is of course no need to install or use) then what you described is the only way

  Don't forget to cancel your existing subscription before the end of your current period

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  -or directly at this link https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

• Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  This question cannot be resolved when you use the brush with an effect.

  It cannot be solved with the form of the task.

  Try just drawing on larger scale, maybe then it won't happen.

• I have creative cloud for just PS and LR which allows me to have this on 2 computers. I now need on a machine 3, is - it possible?

  I have creative cloud for just PS and LR which allows me to have this on 2 computers. I now need on a machine 3, is - it possible?

  Yes, you can install an unlimited number of computers.

  You cannot connect (and therefore to start cc programs) on more than 2 computers at the same time.  But adobe makes it easy to disconnect other computers from a 3rd computer even though it is not really a restriction.

  just install the application of cc on your computers desktop, https://creative.adobe.com/products/creative-cloud and use it to install your lr and ps.

• Just purchased and downloaded 13 elements for Mac. Crash, Crash, fail!

  Just purchased and downloaded 13 elements for Mac. When I open the program and try selection/loading a program to edit (in the Mac picture folder) the program hangs and stops. So far I have not been able to use my new program.

  Customer service does not chat.

  Thank you

  Steve

  If you talk about the new Photos app, it isn't just one thing from adobe; Is there any editing software that does not use the apple photo browser:

  How to use an external editor with Photos for OS X | IVous

• I get a message that I don't have the latest version of Firefox. I just updated and downloaded the Beta Version 11. Why do I get this message?

  I get a message that I don't have the latest version of Firefox. I just updated and downloaded the Beta Version 11. Why do I get this message?

  The current beta version is 12 of Firefox, but if you're not a tester experienced, so it is best to stay with the current version of Firefox and uninstall the beta version.

  You can find the latest version of Firefox in all languages and for all systems operating here:

  • Firefox 11.0.x: http://www.mozilla.org/en-US/firefox/all.html