I know this has been asked before but I deleted 6 months value of files, can not use cancel.

Similar Questions

• I know this has been asked before but...

  Where we never mentions the computer came preinstalled with windows 7.  I never thought until I almost broke my windows 8.1 (long story) so when I fixed it, I still have windows 8.1 and I use it on the computer I'm typing on, I promised myself that I'd get the ISO and the product key in case of having to reinstall now everything I read about this I understand is no product key Code Windows 8 was made on my account Bank of windows access or download auto ISO in Windows 8 operating system.

  I really need this key never code should I have to re - install Windows 8 because that as stated above my computer nearly broke and when I tried to do a refresh it asked for the key. The main reason I'm so adamant to get is that I got the new windows 8 OS Pro for $15 during the promotion, then I got the media center free upgrade (I still have this key in the original email) so I really want to avoid that expense, considering how a new cost of Acer.

  Suggestions as to how I can get my product key Code Windows 8 will be greatly appreciated. No machine will off with Windows 8 of the seller only will be delivered with a sticker of the license of Windows 8 below, regardless of the brand. It is one of Microsoft's security measures to reduce piracy. The product key is injected into the firmware of your motherboard. So if you need to reset or reinstall Windows 8, you need not hunt for the product key. It is automatically applied and activated. This is certainly a plus, especially when the numbers on the product key stickers wear out or are just too small to read easily. You can view the full Windows product key using a third-party utility, Belarc Advisor is the finder key only at the time where successfully extracted the key for Windows 8 just one note but Microsoft seems to change the algorithm for each different version for it that recovery is necessary to make sure that the extractor works with the OS version you have. This gave me the Media Center Code unfortunately I don't think that will work if I need to reinstall.

  I don't know if my product ID. Worse cases occurs that I could use SLUI.exe to display a sequence and a local or toll-free call and receive a verification code. The strange thing is:

  Get your invoice and the product key after your order is processed, you will receive an e-mail receipt that includes a product key. If you continue through the upgrade process now, the product key will be automatically for you, but remember to keep the receipt email and product key in a safe place. It's all the news I found I will now check outlook for deleted items or junk e-mail related to key. Unfortunately, I found nothing.

  If Windows 8 has been preinstalled and you install Windows 8.1 store updates, you don't need a product key. This update is a free update. But, if you have a Windows 7 or earlier, then you will need to purchase a Windows 8.1 product key and activate it.

  If Windows 8 was preinstalled, then you should get the product key from the computer manufacturer. In addition, you should have the recovery on the computer partition and you can easily perform a refresh. If you have a recovery partition, it will never ask for a product key, what refresh or reset. At least for me, he did not enter a code. I could do it easily.

• Narrowing of a disk virtual (I know this has been discussed before...)

  I know this has been discussed before, but I can't find a situation quite like mine and wanted to make sure that I had all my options in front of me before I did anything. It's on a box with ESXi 4.1, build 260247.

  I have a virtual machine with two virtual disks: one for the operating system and one for data. One for data is 1.6 to and has two partitions: 1.1 to and a 500 GB. I would like to delete the 500 GB partition and then reduce the virtual 500 GB disk so that I can use this space on other virtual machines.

  The most popular way that I found in my research is to use the VMware converter to make a copy of it and adjust the size of the disks. That however, does not seem a very viable option. There is no additional local storage to put the VM convertered files, then it will have to be written to a network device any. This combined with the fact that I would copy the OS partition too much (that I don't need), makes this option in way too slow.

  My only idea is to copy all the data on the virtual disk's data to a network device or a USB (through the USB transfer), delete the virtual disk, re-create it with the appropriate size and copy the data back.

  Is there a more easy/fast way to do this? I'd appreciate any help.

  Thank you.

  Unfortunately, the converter is the only option I know for shrink disc. However, due to the situation, I think that the copy is going to be the best method for you.

  Another option is converting only select the player data to convert to the new virtual machine, shrink, migrate over and import it into the existing virtual machine after you remove the other VM. Its a roundabout way, may be slower and not also require that you have the space, but it is another option.

  _________________

  Dustin Pike

  VMware Certified Professional (VI3 and vSphere)

  Blog of virtual cantons

• I need to go back to ff4. I know that this has come up before but I don't have a link to the answer. My concern is the loss of use of Roboform.

  I need to go back to FF4. I have done this in the past, but lost the procedure. I need to get to FF4 so Roboform tool bar works.

  http://www.RoboForm.com/support/news

  Version 7.3.2

  • Firefox 5: Add support for Firefox 5.

• Favorites for the BB blackBerry Smartphones. I know this has been discussed...

  I know that you can add one by one in the browser.  Eventually, cut and paste the site.  I still might have 50 that are really important to me.  That I really want to sit to see how long the battery will last up to as well as my fingers entering bookmarks.

  I'm curious as to why they did not have an import option in the office with the exception of Outlook that I hate.  I use Thunderbird and I don't think that office works with it for synchronization of contacts and or bookmarks.  If there is a way, I'd be interested.

  BB should really happen to a process to do it easily without having to go through hoops to get your data into the phone.  If they would have just done a HTML file that can be overwritten, which would have been better still.

  Thank you

  Mike

  Hello!

  I'll steer clear of the "why does" and "it never will be" types of questions...

  But, you can get your bookmarks on your BB without having to type them is to put them as links in an e-mail message, and then send this e-mail to yourself, then open the bookmarks in the e-mail that and then mark them as a bookmark in the BB browser.

  See you soon!

• I don't want to use the new tab Page. Is there a way I can just get my new tab automatically display Google? I'm sure this has been possible before.

  I already uninstalled the add-on NTP. I can't stand it. The question sums up exactly what I'm trying to accomplish.

  What page you want as the new tab page?

  If you want the website http://www.google.com for example then set the pref browser.newtab.url http://www.google.com
  
  The default value for the pref is built on: page newtab with the grid 3 x 3 mosaic.

  You can use change in the context menu or jut double-click the pref to change its value.

• SHAREit worked before, but since the last update of what YOGA can not find every laptop

  Hello

  I used SHAREit twice with good results (may 2015)

  I tried to use it in early August and earlier, n the YOGA 2 1380 pro cannot find the laptop more although they are 20 cm from each other.

  Version of Windows is different from Android. I already uninstalled the Windows version to a newer version without result.

  And another Member, I just tried to help her by suggesting ShareIt also cannot establish the connection.

  And I see no option to ignore updates.

  All solutions?

  Thank you

  Hello

  I just tested the new version, go to/from my YOGA 2 1380F pro, my A520 AIO, and there is no problem.

  SHAREit A520 AIO, window 8.1, version 2.5.1.1 (SHAREit Info)

  YOGA 1380F pro 2, Android Kitkat, SHAREit Version 2.8.8_WW

  One thing to check is if the WiFi Yoga tape is set to Auto (both bands), or at least updated the corresponding band of the PC.

  IIRC, the PC needs to be connected to any wireless network, although the WiFi it must be turned on and not in airplane mode.

  After an update, you may need to re-pair connection of old/exsiting, by making that stupid 'number' correspondence between the two devices.

  In addition, on the PC, there should be an Easyplus Hotspot Lenovo, showing in monitor resources on the 'networks' tab.

  

  See you soon

  DragonRider

• I CHANGED THE HARD DRIVE, THEN I TRY TO REINSTALL WINDOWS XP BUT I GOT ERROR MSG MSNMSGS.MS_ FILE CAN NOT BE FOUND THROUGH. ? I CLICKED RETRY. THEN HE DID THE SAME THING CUPLE TIME WITH SAME & ANOTHER ERROR MSG.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software - image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• I have been designing a new Web site and when I publish on BusinessCatalyst the index page shows a sign 'coming soon '? This has never happened before and I don't know how to solve this problem?

  I have been designing a new Web site and when I publish on BusinessCatalyst the index page shows a sign 'coming soon '? This has never happened before and I don't know how to solve this problem?

  I have published on an existing site, but also a new site, but I get the same message?

  Hello

  Open the page that wants to set as your home page,

  Click on more action-> set as start page

  

  Now visit the site again, it should be good.

  Let me know if you have any question.

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• How to increase the font size to the bridge using windows 7 and a k 4 monitor?  It seems that this problem has come up before, but there is no answer.

  How to increase the font size to the bridge using windows 7 and a k 4 monitor?  It seems that this problem has come up before, but there is no answer.

  For Windows, you can try this:

  Adobe App scaling on the screens to high-resolution (FIX) | Dan Antonielli

• Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

  As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  Am also using Firefox 43.0.3 browser like Safari.

  'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  You can ignore the above.

  Utility disk - permission errors, you can ignore

  System preferences/Date & Time/Date & time - is it set to automatically set the date and time?

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• Windows defender is stopped. whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  Windows Defender is disabled whenever I turn on my computer. setting has been activated automatically, but a message "windows defender is disabled" keep appearing one whenever I click on it. Help, please. Thank you!

  If you have Microsoft Security Essentials or AVG installed, you don't have to do a thing. These 2 are supposed to disable Windows Defender, because they have their own "defender". Running two defenders would conflict on the other and redundant.

  If you have not installed 2 above. Try this...
  Start bittun > in the search box, type services > press ENTER > uac prompt > scroll down and look for Windows Defender...
  under the State ; It must be said Started
  under Startup type : must say automatic
  If this isn't the case, right click on Windows Defender > properties >
  under the change of automatic startup type to
  under service status to start editing
  Click OK.

  t-4-2

• Sorry if this has been answered. I'm not looking. My prior subscription software will remain usable?

  Sorry if this has been answered >

  Will be the prior subscription of purchases of Photoshop Extended CS6, CS5.5 and 5, first Suite CS5.5, Lightroom 4, Illustrator, Acrobat, Photoshop and elements of Prime Minister, etc. remain usable after the expiry of the subscription? I mean, I'm almost 70 now and at some point I will need to stop subscriptions, but will want to keep "insignificant" around with photography and wishes to continue to use the current versions of Adobe software, I bought so far.

  Thank you

  They will remain usable, but just will not be updated once new (PS CC) version was released.