I lost all my files on my Windows Vista computer.

Similar Questions

• Install Windows 7 on my old hard driver will remove all existing files from my Windows Vista install?

  OEM of Vista to Windows 7 OEM

  I am trying to build a new office, but I reuse my hard drive from my old build considering that 64 bit OEM vista installed I know it won't work with the new construction, but my question is, installation of windows 7 delete all existing files or replace only vista?

  To add about the Bill, you must use a copy of Windows 7 retail.  OEM copies are not for end users to buy and install.  OEM System builder packs are governed by the System Builder License, and you must be a system integrator that sells computers for customers to use.  A person who built a computer for personal use is not a System Builder, as defined by the license.  Such a person can be called a -your-self or anything you like but Integrator system is defined in the license:

  'Authorized distribution and acceptance. To distribute the software or the hardware in this Pack, you must be a System Builder and accept this license. "System Builder" means an original equipment manufacturer, assembler, a repairman or a software pre-installer that sells the customer to a third party systems. »

• I am unable to share files on my Windows Vista computer with my Windows XP computer.

  Hello, I hope someone can help.
  I have a laptop vista and xp from a desktop computer.
  I can see the two computers on both computers.
  I can fully share and copy the files from my xp.
  I can also file destruction c t the vista, but only the xp to vista
  and the Vista for xp.
  It is the last issue that I didn't understand.
  Help

  original title: file for xp vista

  Hello

  You receive an error message?

  You can follow the steps in the article and see if it helps.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows#section_4

  See also:

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

• With problems of backup of the files on my Windows Vista computer

  original title: backup of files

  Should I back up my files because my laptop needs to be repaired and my manufacturer says they will delete all my files when they fix it. Can I do it myself with a plug-in or should I have a professional to do? I don't know I can even do that because even if the power led lights up the screen remains white and it beeps constantly.

  Hello

  If the screen remains blank and you have the error beep codes that normally indicate a hardware problem, I suggest you take it to a professional to get your data before handing over to manufacturers of laptop for repair.

  There is information below in this answer as to how you can recover your data if you are comfortable with the process of making

  but it involves opening the laptop

  For your information:

  to ensure that the beep codes mean you need to know what is the bios of your laptop and then read it as the links below average error codes

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.computerhope.com/beep.htm

  Read this on the record of your data:

  as you can not start your machine due to a suspected hardware problem you can use a linux-based cd to recover data when there is a problem with your hardware that a linux cd must still use to operate because it uses your laptop hardware to operate: card mother etc.

  To save the data:

  1 remove the hard drive from the laptop and it slave in another computer

  2 buy or borrow a USB disk drive hard case laptop insert in it, then connect the speaker to another computer

  Use anyway to try to read the data on this portable hard drive from another computer

• Download error - cannot download anything on the windows vista computer.

  When I try to download anything, it says that Windows cannot find 'C:\Users\Admin\Downloads\shockwave_Installer_Slim.exe '. Then he said, make sure you typed the name correctly and then try again. I hope you can help me.

  Original title: download error

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  It seems that you have problems with downloading files on the windows vista computer.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would appreciate if you can help me with the following information.

  1. what browser you use on the computer?

  2. What is the exact full error message?

  3. don't you make changes on the computer before this problem?

  4. deal with this problem if you try to download all files from online?

  If you do this in the face of Internet Explorer help, I suggest that you should change the default download location and check if it helps.

  Method 1

  In internet explorer, you can change the default location.

  Here's how:

  a. open internet explorer.

  b. click on Tools , then select view downloads.

  c. downloads for window, click Options.

  d. now, enter the default download location and click on the OK button.

  Turn on the computer at the beginning of boot and check if the problem persists.

  Method 2

  Perform a clean boot to see if no third-party service is causing the problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  For your reference:

  Windows Internet Explorer 9 Download Manager using

  http://Windows.Microsoft.com/en-in/Windows-Vista/using-download-manager-in-Internet-Explorer

  Response with more information to help you.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I have a virus inches in my file and I lost all my files from the image. How can I get them back?

  I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.

  I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.

  =====================================
  Are you running Windows XP?

  Please post more details. The more information you share
  you chances of a solution.

  How do you know it was a virus?

  The virus has been removed?

  When the problem happened everything first?

  "Was" folder on the desktop? You say all
  folder is missing?

  The file might be in the trash?

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  If the photo thumbs reappear... they can turn washed
  outside. To clear this up... right click a thumbnail or a
  selected (highlighted) group or folder and the
  menu... Choose... Properties, uncheck the box.
  'Hidden' / apply / OK.

• I lost all the file associaation, with the exception of aol, how do I add these files?

  I lost all the file associaation, with the exception of aol, how do I add these files?

  Hello

  1. what happens when you try to open a program?
  2. have you made changes on the computer recently?

  Try the steps listed in the article below and check.
  How to change or choose the program that starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859

  I hope this helps.

• I ran a restore and lost all my files. I can get back them some how

  Original title: files lost

  I ran a restore and lost all my files (more importantly photos).  I can get back them some how

  Hello

  Log in as ADMIN

  Your photos and other files should still be there under C:\Users\Your user Name\

  Sounds like your account became corrupted or affected by malware?

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I did a system restore but lost all my files, how can I recover them?

  I accidentally pressed no to back up my files when I did a full system restore to factory settings. Now, I've lost all my files. How can I get back them.

  Please give me a step by step guide.
  Windows Vista/32 Bit

  Thanks in advance.

  I accidentally pressed no to back up my files when I did a full system restore to factory settings. Now, I've lost all my files. How can I get back them.

  Please give me a step by step guide.

  Windows Vista/32 Bit

  Thanks in advance.

  First of all, please note that what you were doing was * not * a system restore. System Restore is a * Windows * function restores Windows and has nothing to do with your files.

  What you were doing was the recovery of the system provided by the manufacturer of your computer. That puts shaped windows in car and renstalls hard on it. You probably can't get your files back.

  Allow me to mention something else. Your question indicates that you do not have a regular backup of your important files. If this is the case, you are playing with fire. Even if you never make a system recovery, it is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

  You can read this article on the backup that I wrote: 'Return to top your computer regularly and reliable' to http://www.computorcompanion.com/LPMArticle.asp?ID=314

• Cannot send emails because I lost all the contacts on my windows live account

  Cannot send emails because I lost all the contacts on my windows live account

  Try to connect to http://people.live.com to see if your employees are there.

• Can't unzip the files using the Windows Vista option extract all

  I tried to unzip the files, I have downloaded from the Web site by using the context menu "extract all... "on the file.  I have a Board error saying that the compressed (zipped) folder is empty.  If I try a double click on the file, I get the message that the zip file is not valid.  This has happened to every zip file I tried to unpack so far.  The only files I can unpack so far are those I zipped myself using the context menu "send to folder of Compssed of-->" of Windows Vista.  Any suggestions?

  Hi Eddie Hersh,.

  Thanks for choosing the Windows Vista Forum.

  1 how long have you had this problem?

  2. If it works well before?

  Make sure that the download of the file is not corrupted.

  You can perform the steps in the link below and check if it works.

  Restore and return the file Association in Windows Vista if Original

  1. click on start, and then type regedit in start search and press ENTER.

  2. navigate to the following registry branch:

  NtVersion ntVersion\Explorer\FileExts\ [ext]

  Replace the [exe] with the real extension of the file you want to restore the file type association to return to the default Windows Vista original. If you unsure, simply browse through all the Sub-touche under FileExts.

  3. delete the subkey named UserChoice.

  4. exit the registry editor.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  Compress and uncompress files (zip files) - http://windowshelp.microsoft.com/Windows/en-US/Help/7050d809-c761-43d4-aae7-587550cd341a1033.mspx

  Kind regards

  Marnie.

• I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.

  original title: sharing of Windows Vista

  I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.  When I go the file that he always asks if I want to share the folder and when I look at the properties he says not shared... what happens?

  Hello

  I suggest you to read the following article on the essential elements of file sharing and to try to share the files again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

• recently upgraded to windows 7 and lost all the emails saved in windows mail, is it possible to retrieve the saved emails?

  recently upgraded to windows 7 and lost all the emails saved in windows mail, is it possible to retrieve the saved emails in windows mail that are and have it transferred to microsoft outlook?

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Lost all my files after resetting by mistake my computer setting factory

  I just accidentally reset my computer to factory setting and I lost all my files so please help me restore my previous version with my files. Thank you

  I'm afraid there is no way that you can recover your files if you have reset your computer using factory reset. Bit late now, but should have backed up your files externally.

• I lost all my files from my pc

  Dear Sir.

  I cut & copy all my files (50 GB) from my laptop on another pc. then I lost all my files, I tried to restore the last restore point there was a mistake. then I updated my pc & I tried there was point (failback). I tried the restore point manually to the day that I lost all my files. also, I couldn't have my files.

  then I tried to backup my files from the file history, but it was more than 5 hours of operation nothing I had, and then stopped & closed the file history.

  now, what is the best way to get all my files without damage

  Cut & copy is not a safe way to make a transfer.  Obviously you know that now.  If there was no 50 GB you might find something in the trash, but I seriously doubt that you will be able to recover these files.

  One thing I might try is an application named "recuva" which CAN recover some of them, but more recovery is doubtful