I'm built with script problems. I Yes Script and it doesn't help. Is there another suggestion... 20 for a website it madness.

Similar Questions

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problem scanner PORTABLE Asus and Cannon lide110 Please HELP NEED FOR WORK IN THE MORNING Thank YOU

  I have an asus laptop and I have to scan ID and things of that nature for work. I use the canon lide110 scanner to scan and when I do it scans while he presents himself as one of the predefined p [ictures that are on the computer when buy you them...] How do I see what I scanned to import it into my photo file?

  Hi Amanda,.

  You have installed the drivers for your Canon lide110 scanner?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Run the corner hardware store and check.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have not installed the Scanner driver, go to method 2.

  Method 2: We will install the driver application and scanner Canon Scanner.
  

  See the following links:

  Version of driver Scanner LiDE 110 17.0.4

  http://www.Canon-Europe.com/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_110.aspx?DLtcmuri=TCM:13 - 831503 & page = 1 & type = download

  Solution Menu EX version 1.4.0

  http://www.Canon-Europe.com/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_110.aspx?DLtcmuri=TCM:13 - 831523 & page = 1 & type = download

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• EliteBook 8440p with xp, problem peripheral ahci controller and radio wirelles not detect networks

  To install XP in AHCI mode do not work, after work in the bios to "ide mode".

  Once installed, place all the drivers. I have 2 problems:

  1. the wireless is active, but not find any network

  2. If I go back to AHCI mode in the bios, I've got blu screen, system error (load by floppy disk driver in question)

  Recommendations?  Solutions?

  thankss!

  Hello:

  Copy all of the Intel AHCI files on a floppy disk, and then select the Intel (r) 5 Series 4 Port SATA AHCI Controller.

  According to this manual, on page 11, which is the driver you need, or you can try with your current installation using my method above.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02551975/c02551975.PDF

  Intel (r) 5 Series 4 Port SATA AHCI Controller

  The wireless...

  I do not know. If it works, it should detect the network and according to your screenshot of the Device Manager, it shows that it is correctly installed.

  Paul

• Thers been a slight problem with lightrooms speed, its very slow and every time I come back inside, he keeps asking for me to connect

  My lightroom was very slow for the last two weeks that I can't find the question .im wondering if you might know the problem? In addition, whenever I connect it always ask for me sigm again.

  Hi rileyt.

  You can disable the graphic processor of Lightroom preferences to correct performance.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  For the sign in question refer: Lightroom does not launch or closes automatically after the splash screen

  
  

  Let us know if that helps.

  Kind regards

  Mohit

• Problems to open attachments and documents online! Help

  I have Windows Vista and Microsoft Office 2007. Recently when I try and open a document online, or a room attached to e-mail, it opens with the CODE? Even if the document is not in WORD, it is the default one and said so do SAVE you or OPEN this file? When I OPEN (the same thing that happens when I record on my account as well) a box appears that says...

  FILE CONVERSION - (with letters and numbers here)

  Then he said:...

  Select the encoding that makes your document readable:

  ENCODING OTHER MS-DOS from Windows (default)

  Then, there is a box on the right with all these countries... etc...

  and below a box... which displays the code.

  No matter what a choice all that I see is the code? I'm usually picking WINDOWS (DEFAULT), but that did not help either. Why would he do that? I even UNINSTALLED MICROSOFT OFFICE 2007 and then REINSTALLED thinking that would help... but no luck! I also ran scans on my account to see if it was a virus... but no threats not found...

  I am at a loss, maybe it's just a simple matter of SETTINGS?

  Thank you

  Michele

  .xls files must be opened with Excel. .doc with Word files, etc.

  If you do not understand the information contained in the link provided, please ask a friend asistance to understand.

  See you soon.

  Mick Murphy - Microsoft partner

• Presario SR1463CL with drivers problems

  Please be tolerant of beginners.

  I purchased a SR1463CL to add to a DELL Dimension - old but never fails. -the HARD drive was crushed. I replaced the HDD Samsung with Western Digital. I have replace the dial-up modem. All this without problems. I installed Windows XP Pro and SP2 update. My system detects "New hardware" drivers VGA Compatible and multimedia controller. I have had no success finding the right drivers and their installation. My monitor works find, but I have no sound.

  Poster 'sounds, video controllers' Device Manager with the problems. Initial device showed sound and audio by default to the Modem. I removed which and at this point no device is indicated.

  Device Manager shows no driver found for new hardware and online search has failed. Windows Update detects any is available. I checked on the resource one manufacturing line have failed in my downloadsfrom RealTek and Nvidia.Dial - up has had major periods and material has been identified as there's no way for the system. Previous owner had made the back-ups-DVD-but they went "purple haze" and could not be read. That's why I installed XP Pro.

  My modem does not work on and additional time. It will connect and funtion but after a few minutes I'll get "Page not found" displayed.

  So, I use my Dell Dimension for internet troubleshooting. Any help is greatly appreciated.

  Respectfully.

  "Submariners do it deeper."

  Thanks for the information. Due to serious conflicts resulting from auto-updates from microsoft, which I had to reformat the HARD drive and have located since the necessary drivers to the www.sis.com for VGA and www.realtek.com for audio AC 97 readers to be precise. Manually review and choose downloads in the future.

  "Greens, all councils prepare to dive."

  Thanks again for your help. It is greatly appreciated.

  Bamabubblehead went to the abyss.

• Can someone help with the problems of email account? Messages from the console?

  vcyman , March 9, 2016 13:16

  I had ongoing issues with my Mail months including Spindumps and just doesn't look good, so I changed the e-mail settings in the past according to the directives of the ISP, but now the incoming server is grayed out, more it's time to see if my overall situation needs some changes. As I am researching the current issue of the evolution of the e-mail settings, I see the information that can be linked to a larger problem, so I'm including that in a larger context.

  I use my Web site for most of my email accounts and received error messages indicating that the certificate is not valid. I contacted Hostway and learned that they have their own encryption and don't require SSL, but they said Apple mail works best if I use their specific settings instead of those I have. The server settings entering my accounts existing messaging site are shaded out and immutable. What is the best way to make changes without causing more problems?

  I tried to move the mail account plist.to the trash and restart hoping that would disable the accounts but it didi not work. Or I sign out to iCloud and make changes?

  MORE INFORMATION

  In/Library/Application Support / Mail / Online Account Types/com.apple.updated.mailaccounts/MailAccounts.plist, the Account.plist includes an e-mail account which is Ameritech and not logged into my site.

  in Library/Mail/it is V2 and V3. V2 is V2/MailData/Accounts.plist. V3 contains no Accounts.plist. in MailData. I printed the Accounts.plist. and there are 22 pages of data. Each e-mail account is repeated at least three times and it seems connected to the when I made changes to the account settings in the past.

  This may be related to a larger problem because I have error messages related to the e-mail in the console.

  09/03/16 12:05:22.644 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM DCs [365]: securityd_xpc_dictionary_handler cloudd [429] copy_matching error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.649 PM Mail [634]: cannot load the draft for documentID: C265D900-C6A3-48B9-AF60-C83FE29A7AED

  09/03/16 12:05:22.705 PM Mail [634]: cannot load the draft for documentID: E1D3029B-C2BF-425E-8F67-32C190B420CF

  09/03/16 12:05:23.142 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.144 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.417 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.432 PM]: looking for iCDP status IDDM 61149625 (checkWithServer = 0)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: error XPC while checking if iCDP is enabled for IDDM 61149625: error Domain = NSCocoaErrorDomain Code = 4099 "the connection to the service named com.apple.cdp.daemon was invalid." UserInfo = {NSDebugDescription = the connection to the service named com.apple.cdp.daemon has been invalidated.}

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: connection Daemon invalidated!

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.436 PM]: [AOSAccounts]: [__49-[ACAccountStore (iCloudAccount) icaAppleAccounts] _block_invoke]: accountsWithAccountType returned the error: Domain = com.apple.accounts error Code = 9 '(null) '.

  09/03/16 12:05:23.446 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.716 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:24.076 PM sandboxd [139]: com.apple.Addres (501) ([501]) deny com.apple.cdp.daemon mach-search

  09/03/16 12:05:24.626 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: key :-25300

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: status: power off

  09/03/16 12:49:52.821 PM Mail [634]: * the Assertion failure in French-[IMAPParseContext _parseStatusResponse], /Library/Caches/com.apple.xbs/Sources/Mail/Mail-3112/IMAP/Connection/Responses/ IMAPParseContext.m:956

  09/03/16 12:49:52.821 PM Mail [634]: exception IMAP response analysis: tried to parse a response from status without knowing the separator character.

  I'd appreciate any suggestions.

  Is your IMAP account?

  You have stored messages slot "on my Mac"?

  If create you your account in a new user, it works correctly?  (see below)

  See my answer in a similar debate. Let me know if you need more assistance.

  Re: The first time to open Mail.app: opens the window Import Mail Message - crashes during the infinite-import cycle how to break it?

  Re: Certificate error. When the message appears you must choose "see the certificate", then select "always Trust ' in keychain."

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can skip the connection with an Apple ID, unless you want to test an iCloud account. Select continue, then jump.

  Open Mail and add your account. If it's a POP account, make sure that you do not select "remove copy from server after retrieving a message," on the Advanced tab.

  

  You still see the issue?

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Clone Stamp does not not with Scripts

  Hello

  My sister wants to make a stop motion and she would like to remove a stone on each image.

  I tried to make a script, but when I apply it it doesn't change anything, so I wanted to know if it is possible to use the buffer of duplication with scripts, and if so, how?

  Thank you very much in advance for your help!

  And sorry if my English is not very good, I'm french!

  Are actually using scripts or actions?  I tried the clone with actions stamp, and I got the same result.  You can use the spot Healing Brush to remove the rock.  who works with action, as long as you have "The recording tool" lit - not sure what the menu in French item name.  The other option to record an action that does this: make a selection of an area you want placed on the rock, duplicate this selection to a new layer (cmd/ctrl-J), hover over the image of the rock cutting, and then merge to the bottom of the layer.

• How to fix the problem with windows to format external drive and lightroom

  I'm working on an imac with lightroom 4. I've already imported photos from an external drive that is formatted for windows. I made some changes using LR develop module but I would also use my NIK plugins. Lightroom does not allow me to export to the Nik plugins because the files are on a windows format. How can I copy/paste the photos on a mac to the disc format while keeping my changes? In addition, how re - import these files in the mac player in LR? At the present time, these files are shaded on b/c they are already in LR on the windows disc. Help?

  TUxera is a utility that gets around this limitation of Mac.

• Flex 4: how 2 set Application width/height with Script?

  I'm new to Flex 4 and going through the pain of migration of 3 to 4.

  I need to set the size of my application programmatically. In Flex 3, I made this way:

  mx.core.Application.application.width = theWidth; (equivalent to the height).

  I don't know how to do this with Flex 4. Searched high and low.

  Help, please! TIA

  Bruce

  You can use the this.width, this.height and properties.

• disable hardware acceleration set my image loading problem. is there another way to get around this?

  System details:
  OS: Windows 8.1 Professional (64-bit)
  Graphics card: PNY NVidia GT 610 (2 GB)
  RAM: 5 GB
  Firefox version: 36.0 (32-bit)

  Since yesterday, when the images would load on Web sites, some of them would be entirely black, or black for the most part, with only a piece of the images loaded, only to fully charge a few minutes later.

  Disabling hardware acceleration has solved this problem, but reduces the overall performance of firefox. Is there another way to work around this problem, not to mention that disabling hardware acceleration?

  Note: The only 2 things I have tried have been reset firefox and a new installation of firefox. I don't want to lose my data of the addon and the custom settings of firefox, because it takes too much time for me to put them back where they are now.

  I'm also pretty computer savvy, if you can get quite technical with me. If I don't understand something, I ask.

  
  

• Problem with script OnConnect Portal WEBVPN AnyConnect

  I have a minor problem

  customer is 2.5.0217

  OnConnect script works great by the client anyconnect however if I use the web front-end ssl to launch the client anyconnect onconnect script does not run. Is it possible to have onconnect and ondisconnect scripts to run if the anyconnect client is launched as part of the webvpn.

  I searched high and low, but without success. Help or ideas would be greatly appreciated.

  Thank you

  Hello

  According to my understanding of the issue, I see that the script does not run when Anyconnect is launched using the portal.

  It may be related to a difficulty finding profiles sometimes.

  This is usually the result of not having a hostname and hostaddress configured in the existing profile. I think it is perhaps a good idea to add

  these values to your existing profile so we land on the right xml profile the first time.
  
  Try to add the host entry as  with fqdn of ASA.
  And let me know if it helps.
  For clearing up the credentials in the dialog box when using AnyConnect I found one of the bug:-
  CSCsx76993
  
  

  Symptom:

  User credentials are cached in the preferences.xml file when you use the Anyconnect client.  So when they revive Anyconnect, the user name is displayed in the client.

  Conditions:

  You can see all the client anyconnect.  It is a configurable option in the IPSec client.

  Workaround solution:

  Currently there is no work around

  And I can see it resolved in 2.4.202 however, I'm not sure if its fixed in 2.5 also. For this I would like to hear from others.

  Kind regards

  Shilpa

• the cell's overflow to find table - problem with script

  Hello

  as a translation company, we often do some DTP on Framemaker documents. Documents often contain many tables and the translated text will always enters the cells, giving overflow. I'm looking by creating a script that detects the overflow in the table cells.

  I already tested a few scripts and met today with a problem that I can't find. I started detecting overflow from the cells in a selected table, that works very well and gives an alert when an overflow is detected. This script:

  // == WORKS ON SELECTED TABLE ==
  var doc = app.ActiveDoc;  
  var tbl = doc.SelectedTbl;  
  var row = tbl.FirstRowInTbl;  
  var cell;  
    
  while (row.ObjectValid () === 1) {  
      cell = row.FirstCellInRow;  
      while (cell.ObjectValid () === 1)  {  
       if (cell.Overflowed === 1) {  
    alert("cell overflow Will Robinson!");
    }
          cell = cell.NextCellInRow;  
      }  
      row = row.NextRowInTbl;  
  }  
  // == END OF WORKS ON SELECTED TABLE ==
  

  However, I thought it would be nice to browse tables in a document and find all the cells of overflows, instead of going to table by table. If this script runs successfully in tables, lines and cells in a document:

  // === LOOPS THROUGH TABLE, NO OVERFLOW ===
  var doc = app.ActiveDoc;
  var tbl = app.ActiveDoc.FirstTblInDoc;
  var row = tbl.FirstRowInTbl;
  var cell;
  
  
  while (tbl.ObjectValid()) {
    alert ("gimme a table");
    while (row.ObjectValid () === 1) {
    cell = row.FirstCellInRow;  
    while (cell.ObjectValid () === 1)  {  
    alert("gimme a cell");
    cell = cell.NextCellInRow;
    }
    row = row.NextRowInTbl;
    }
  tbl = tbl.NextTblInDoc;  
  }    
  // === END OF LOOPS THROUGH TABLE, NO OVERFLOW ===
  

  When I add the block

      while (cell.ObjectValid () === 1)  {  
       if (cell.Overflowed === 1) {  
    alert("cell overflow Will Robinson!");
  

  in this script, it does not work. According to the cell. Overwhelmed A requires the table to be selected? Does anyone know how to get around this problem - by selecting the table if the object is valid before performing a loop on the lines, or by the detection cell. A swamped in the above script?

  I also - why not :) - I tried overflow under the doc.flow rather than FirstTbl, but although it detects flowes/frameworks and subcol correctly, it is not always register the overflow.

  var doc = app.ActiveDoc
  var flow = doc.FirstFlowInDoc
  var frame = flow.FirstTextFrameInFlow
  var subcol =frame.FirstSubCol
  
  while (flow.ObjectValid()){        
              while (frame.ObjectValid()) {               
                      while (subcol.ObjectValid()){
                          if (subcol.OverFlowed === 1){
                          alert("colsies"); //doesn't work!
                          }
                          subcol = subcol.NextSubCol
                          }
                  frame = frame.NextTextFrameInFlow
                  }
              flow = flow.NextFlowInDoc
     }
  

  I'm clearly missing something, but I can't know what? Any help would be greatly appreciated...

  Kind regards

  Geert

  Your code in the second script isn't quite right. Try this:

  var doc, tbl, row, cell;
  
  doc = app.ActiveDoc;
  tbl = doc.FirstTblInDoc;
  while (tbl.ObjectValid ()) {
      row = tbl.FirstRowInTbl;
      while (row.ObjectValid ()) {
          cell = row.FirstCellInRow;
          while (cell.ObjectValid ()) {
              if (cell.Overflowed === 1) {
                  alert ("Cell overflowed");
              }
              cell = cell.NextCellInRow;
          }
          row = row.NextRowInTbl;
      }
      tbl = tbl.NextTblInDoc;
  }