I'm getting MCMailErrorDomain error 1045 with my BTinternet account

Similar Questions

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• Security problem - Everytime I sign in my e-mail, I get an error message saying that my account has been blocked temporarily.

  Whenever I'll sign in my e-mail, I get an error message saying that my account has been blocked temporarily. I changed my password, and I always get the same messages. I can't send email because it asks me to verify my account. When I do, I always get the same message. What can I do else? Help!

  Hi Tom,

  Are you referring to Windows Live Mail? If so, I would say that to visit the Windows Live Solution Center that is not a problem we can help solve the answers:
  http://www.windowslivehelp.com/

• I keep trying to run 2 updates that will not update. I get the error 646 with them. they are related to the KB976884 and KB976416. they are for Outlook and the pathfinder 2007. I'm not sure but I think they are for microsoft office 2007.

  Sorry if I'm repeating myself, but just trying to meet what is needed.  The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)

  Download size: 2.1 MB

  This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.

  More information:
  http://support.Microsoft.com/kb/976416

  and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter

  Download size: 3.2 MB

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to remove an unknown account, get the error 'cannot delete the unknown account because this object inherits permissions from its parent.

  I have several programs that when I go to security there is an unknown account and when I try to delete unknown account I get this message that you cannot delete the Unknown(S-1...) account because this object inherits from its parent perssions. To delete the Unknown(S-1...) account, you must prevent this object from inheriting permissions. Turn off the option for the inheritance of permissions and then try to delete the Unknown(S-1...) account again. I tried the edit and advance features in respect of security without success. Why have I not control over security permissions?

  Found a solution to this problem.

  Go to the folder parent of the folder that contains the files with this unknown account number:
  1. right click on the PARENT folder, and then click Properties.
  2. on the Security tab, go to the advanced options (bottom window)
  3. in the new window, click the button change the permissions in the bottom.
  4. Select the Group (NOT AUTHENTICATED, just of users USERS) users
  5. check "replace all permissions of child object with permissions inheritable of this object.
  6. click on the OK button or apply and done, fixed number.

  Hope this helps anyone else having this problem, for me it happened after reinstallation of win 7 on the same machine and keep my images on another partition, so it was spared by the new facility, so the old user account was always on the file permissions.

• Get the error 42 with datasocket

  Hi people,

  I'm getting erro 42 with a simple datasocket read to a local network "http://172.27.72.70/versions" connection, I can query other webpages such as www.google.com.   Any idea what I need to add to the front of this URL to make this work?

  I saw this http://digital.ni.com/public.nsf/allkb/27272FE3A32C334286257612004D9153

  I don't know what that means:

  "To work around this problem, you need to add [text] the URL connected to yourDataSocket Read.vi.  "

  Chrome, for example, can display information about the use of the same order.

  Any ideas?

  LV8.6

  -SS

  Usually I find that workaround means exactly what it says.  Change the connection string:

  http://172.27.72.70/versions [text]

• I get the error 0x800ccc92 with Windows Mail asking for my username and password.

  The username and password I used does not work.  How can I get my username and password or implement new?

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error message with the Java plug-in is not installed. The required version: 1.5.0_11 download the Java plug-in from this server and install it manually. I downloaded and if I try to install it I get a message that it's already me

  The Java plug-in is not installed.
  The required version: 1.5.0_11

  Download the Java plug-in from this server and install it manually.
  

  When you try to load it shows that he is responsible.

  This has happened

  Each time Firefox opened

  == I had to reinstall Firefox on my new laptop computer

  Other issues: to correct the problems of security/stability

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:and~ ~ How to change options to add Adobe to the list of allowed sites

• Get code error 80072efd with updates

  I have an error code 80072efd he won't disappear I did everything it said to update, but nothing work please help

  * Title *.
  Help, please

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  You may encounter temporary connection [e.g. 0x80072efd] errors when you use Windows Update or Microsoft Update to install updates:
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Skip the section to APPLY to; run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• get an error unresponsive with lightroom 6 after upgrade windows 10

  recently the windows 10 have improved now my lightroom 6 Guard giving me an error in responding as the pass of the library to put to the point and when exporting

  Hi nancyo,.

  This could be because of the GPU settings.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• Magic Jack works on Windows XP. I get the error-incompatible with Windows 7

  Title: programs original compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  My trys Magic Jack to run on windows XP & I have Win 7. Then tells me not compatible

  Hello

  (1) is a 32-bit computer or 64 bits?

  (2) don't you try to run the program in compatibility mode?

  Try to install the program in compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, you can contact the support team of Magic Jack for more assistance.
   
  http://www.MagicJack.com/plus-V05/customercare.html
   
   
  Hope the information is useful.

• Get the error on the single user account: drive serious error writing to drive C

  Hello there, I have 4 user accounts on my desk at home and on one of them this message whenever I try to use this account and it sends me warnings on my desktop and icons in the lower left corner a message saying (drive mistake of writing on C drive)

  Original title: DISK BOOT SECTOR READ error MESSAGE

  Hi GARYDURAN,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Create a new user account and check if the problem persists.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the steps in the article to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Gets the error code: 0x800CCC92 in Windows Mail.

  Original title: windows mail problem.

  I get this error message see below

  Account: 'mail.o2.co.uk', server: 'mail.o2.co.uk', Protocol: POP3, server response: '-ERR [AUTH] invalid user or password ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  Can anyone help how solve my windows email

  Concerning

  Hello

  1. when exactly you receive this error message?

  2. don't you make changes on your computer before this problem?

  You can follow this link & check if it helps.

  Solve problems with Windows Mail

  Hope the helps of information.
  Please post back and we do know.

• X 230 error 1802 with the Correct WLAN card

  Recently, I ordered my brand new x 230 for the start of the University and selected the thought of WLAN card default option which would be sufficient for my needs. After the hand signal and dropouts, problems I decided to upgrade the WLAN card that would improve the signal strength.

  I know the existence of the 'white list' frustrating that means that some cards are allowed to use. So, I went in the store of Lenovo and looked for what was the best WLAN card that might come with a new order of a 230-System x, as surely they are on the whitelist.

  Later, I bought an Intel Centrino Ultimate - N 6300 card and installed correctly in my x 230. However, from the start I saw to my despair that the 1802 error was there, tells me my card has not been approved. Could someone explain how hell a card that can come already installed in x 230 is not did not whitelist checking?

  Needless to say I am not very satisfied with Lenovo, because I can't even find a list of what cards are accepted. What is the point in a white list anyway? I am a student trying to patch BIOS to remove it, but no one has yet done a patch.

  Why do I get an error 1802 with this card?
  Thank you.

  Hello and welcome,

  Doesn't have that 6300 come from the store of Lenovo, or from a vendor who said it was for a Lenovo laptop?

  The card type is not the whole story when comes to the white list.  In addition to the correct (6300) type by its PCI vendor and device ID, it must have an ID of subsystem of Lenovo.  (IIRC, it can be more precisely not the subsystem ID, but the effect is the same).  A generic 6300 will not work.

  A card must be sold by Lenovo or pass the white list.  Reputable suppliers will provide a number of Lenovo FRU (CRU) to check the FRU list for the machine.

  For example. Since the research database of Lenovo parts -> ThinkPad X 230page, the RUF for that 6300 is 60Y3233.  It was not easy to find.  The RUF are not in the hardware maintenance manual any more

  If your card has a number of Lenovo FRU, something else is in place.

  [edit] types andyP faster as I do...

  Z.