Magic Jack works on Windows XP. I get the error-incompatible with Windows 7

Similar Questions

• My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

  I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

• Windows Update does not work on my laptop - I get the error C800044E. nothing seems to work.

  I ran Symantec and the removal tool malicious s/w - found nothing.  I get a similar error when I try to update the windows defender definitions.

  Hi afblue1,

  1. When was the last time you were able to install the updates on the computer?

  This can occur if windows update components are corrupted on the computer.

  I suggest that reset you the windows update components and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connection Wi - Fi works very well, sometimes, then get the error 12007 farm in unexpected ways.

  works fine sometimes then leaves get error 12007 ?

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if they help.

  Step 1:

  I suggest you to update your wireless network card drivers and check if that helps.

  How to manage devices in Windows XP

  Step 2:

  Follow these steps and check:

  a. Click Start, click Run, type 'cmd', go to the command prompt and type in: "ipconfig/flushdns".
  (b) and then click OK.
  c. then type ' ipconfig / renew ' and press Ok.
  d. then type "netsh int ip reset resetlog.txt" and click Ok.
  e. restart your system and check.

• I get the error 0x800ccc92 with Windows Mail asking for my username and password.

  The username and password I used does not work.  How can I get my username and password or implement new?

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get moviemaker to work on my computer. always get the error message, asking if I want to send an error report. __

  trying to open movie maker I get the winbdow which says "windows movie maker has encountered a problem and needs to close" and then askss to send an error report. Downloaded the program again, but keep getting the same message

  Hi jovato,

  Remember to make changes to the computer before that happened?

  I suggest you try the following steps to refine the question:

  Step 1: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Download and install the latest service pack on the computer

  
  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/default.aspx/KB/935791

   

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I keep trying to run 2 updates that will not update. I get the error 646 with them. they are related to the KB976884 and KB976416. they are for Outlook and the pathfinder 2007. I'm not sure but I think they are for microsoft office 2007.

  Sorry if I'm repeating myself, but just trying to meet what is needed.  The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)

  Download size: 2.1 MB

  This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.

  More information:
  http://support.Microsoft.com/kb/976416

  and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter

  Download size: 3.2 MB

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Get the error 42 with datasocket

  Hi people,

  I'm getting erro 42 with a simple datasocket read to a local network "http://172.27.72.70/versions" connection, I can query other webpages such as www.google.com.   Any idea what I need to add to the front of this URL to make this work?

  I saw this http://digital.ni.com/public.nsf/allkb/27272FE3A32C334286257612004D9153

  I don't know what that means:

  "To work around this problem, you need to add [text] the URL connected to yourDataSocket Read.vi.  "

  Chrome, for example, can display information about the use of the same order.

  Any ideas?

  LV8.6

  -SS

  Usually I find that workaround means exactly what it says.  Change the connection string:

  http://172.27.72.70/versions [text]

• My computer won't install seedbed updates and I get the error code: 80248007

  I tried to pull up of Microsoft Word all night and it wouldn't let me so I searched how to fix and found a post that says I might update my Windows. I have Windows 8 and part of the update installed, but then at the end it says I have 5 important updates that can be installed with an 80248007 error code. Anyone have any suggestions on how to fix this? I need my computer working properly and especially my office products. Thanks in advance!

  Hello

  It would be great if you let us know exactly what happens when you work with Microsoft Office programs and the problems that you encounter when you say that my computer works correctly.

  You get the error message?

  At this point, I would manually reset the update of Windows on the folders on your computer and see if that allows you to install this update.

  Note: Perform these steps would be clear Windows Update history on the computer, but will not uninstall updated.

  1. press the Windows and R on your keyboard keys, then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Windows Update

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer here so that we can help you further.

  Reference:

  http://support.Microsoft.com/kb/958046/en-us#appliesTo

  Let us know the results.

• STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error, choose your type of keyboard

  STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error to Choose your type of keyboard

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step is really for a solution online

  Hello, when installing Adobe Creative cloud, you get the error: program stopped working "Adobe Creative Cloud" Windows can check online for a solution to fix this error on the Internet. The next step really is to get an online solution and close the program, close the program. Signature of the problem:

  Problem event name: BEX

  Application name: Cloud.exe Creative

  Application version: 3.4.3.189

  The timestamp of the application: a 56702, 75

  The name of the module with the error: StackHash_0a9e

  Version of the module with the error: 0.0.0.0

  The module of time with error stamp: 00000000

  The exception of compensation: 00000000

  Exception code: c0000005

  Exception data: 00000008

  OS version: 6.1.7601.2.1.0.768.2

  Language code: 1049

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  
  

  uninstall all cc on your computer.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  suspend your antivirus/antimalware

  Right-click on the file to install the desktop application, and then click "Run as Administrator".

• I get the error 'no reliable connection '. I tried to delete the file cert8.db as said, but it did not work and my time is correct.

  I get the error message "Untrusted connection" for a site I visit every day with the only option being "get out me of here!" I use Firefox version 39.0 and have Windows 8.1. I found a thread indicating how to solve this problem by removing the file cert8.db. I have used this method before and it worked then but it didn't this time. Tried to look elsewhere for help, but what I saw spoke of the time / date being off. However mine are correct sentence. Any help would be much appreciated.

  https://support.Mozilla.org/en-us/KB/server-not-found-connection-problem

  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

  https://support.Mozilla.org/en-us/KB/secure-connection-failed-error-message

  https://support.Mozilla.org/en-us/KB/connection-untrusted-error-message

  http://KB.mozillazine.org/Error_loading_websites

  This connection is Untrusted is sometimes caused because the
  the computer system clock is wrong. Check the time / date / time settings of the area.

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft