I'm having a problem with the email of comdast especially for the outgoing with SMPT. Does not recognize the user name or password. Erased and the exact same re-admitted and do a little work and now 2 - 3 times a week same recurrs either on iphone, ipad a

Similar Questions

• Server does not recognize my user name on outgoing emails

  On my iPhone 4 my server does not recognize my email (Telstra) address on outgoing emails, but recognizes the incoming emails. What happened all of a sudden no reason apparent. I have two other email addresses on the phone and they work fine. One is a gmail address and the other is another address of Telstra. Can someone help me please?

  try to remove the account from the problem and add it again

• Cannot connect to Mozilla Support. It does not accept my user name or password. Reset password email says that my account is already activated.

  Tried to access the Forums of Support of Mozilla for Firefox Desktop Support, I've used several times. He cannot accept that my user name and password, claiming that they were incorrect. I tried the password reset function, which opened a window saying that accounts created before December 2010 may have connection problems. Reset your password below. It tells me to enter my e-mail address so that it can send me the instructions for setting up a new password. I get my e-mail address. It is said that we have sent an email to any account using this address. Please follow the link in the email to reset your password. I go to my email. Nothing is there. I wait, but still nothing.

  I return to the login page and click the link - I do not have a confirmation email - connection issues. A new window opens telling me to activate my account, I have to first of all confirm my email address. I enter my email address. I get an e-mail from Mozilla immediately, telling me that my account is already activated, and it gives me a link to connect. I click on this link. I get my login and my password again. Same error message denying me access and tells me to enter a correct username and password. I try twice with no success. Same mistakes repeated.

  So I try to create a NEW account using a different user name my email address. It doesn't let me do. It is said that the email address is already taken, and it does not allow me to proceed. In the end, I had to set up a new account with an email address that I never use, just so that I could access the functions of the help. I'm exasperated. I don't want to post my Questions that I do not use and having to open another application to access even the e-mail address. I want to be able to receive a message from Mozilla in my daily e-mail normal, if someone has replied to my message. But as Mozilla doesn't let me use my e-mail address for the new account, I put in place, I can't do that.

  It's very frustrating. Mozilla does allow me access to my original user account that has already been put in place with my preferred email address. And Mozilla will not let me create a new user account with my preferred email address. Now I'm stuck with a new user account which is linked to an email address that I never use and is not easily accessible to me. As a last resort, I access my new user account in the hope that it will allow me to change the email address associated with the account, but of course, this is not an option.

  Can someone please help me access my original account with my login and my original password? If a password reset is necessary, then I should not receive an email response telling me that my account is already activated (see below). If it is checked, then why can't connect? What is going on? Please help me. Thank you.

  It seems that your account has already been activated.

  You can connect to:

  https://support.Mozilla.org/en-us/users/login

  Thank you!

  Team support.mozilla.org }

  It's a bug

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=855599

• Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  Why the CC lightroom does not recognize my users folder when you try to import?  I can not imaport images in the program.  It has worked well in the past

  It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.

  HAL

• 5.6 LR does not recognize my Nikon 70-300 1, mm and my Tamron 28-300 mm.

  5.6 LR does not recognize my Nikon 70-300 1, mm and my Tamron 28-300mm lens profiles.  The profiles have been added in the last update, but I have to manually select them.  How can I me LR to recognize when importing?  I'm on a 1 V2 and a D800 Nikon RAW images shooting.

  If you change the lens Corrections / profiles / auto Setup are they found?

  If this is not so when you have a selected photo, which was shot with the lens and then select the profile of lens manually, select Setup / Set new lens profile by default and then wehenver you select by default that the lens will be chosen.  Assuming that you can get by default to pick up the two glasses for their appropriate photos, then set the LR lens Corrections / profile / default Setup instead of Auto default LR.

• I transferred CS5 to a new computer using the PC transfer program. CS5 starts on the new computer, OK, but now does not recognize raw files. Should I uninstall and reinstall again?

  CS5 I transferred to a new computer using ultimate PC mover. CS5 seems to start normally, I had to insert the serial number of my original CD. However, now, the program does not recognize files CR and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer by using the original CD, and then reinstall CS5 using the CD on the new computer?

  I finally got to work. I had to load the files CR of adobe several times but it finally worked. Thanks for your help.

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• My laptop does not recognize that there is a hard drive and so I can't eject one who is stuck in it. What should I do?

  I inserted a disc in the drive and it does not recognize the drive and the disc, so I tried to eject, but I can't. So far nothing online seems to have helped. What should I do?

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =======================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Is there a problem with firefox does not, it's happening on all our computers at work and at home. It takes about 10 seconds, then stops responding.

  I read FF posts of the community, and it seems to be a problem with a lot of ppl. It happened for about 3 days now on all our computers at home and work. This cannot just be linked to a computer if this happens for many. I was wondering if there is a general problem with FF, is that what is happening for many users. When I start FF I am lucky to get 10 sec before it does more, ready to give FF film! I use it in safe mode now & use of IE next until I find another solution other than resetting FF. FF should maybe see if there is a problem at their end, & then show us how to fix it.

  To return to regard to extensions, you can view and update the extensions on page modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Click the "gear" above the list, and then use the check for updates.

  You can also disable non-essential or unrecognized extensions (or so obviously not good, remove them).

  Typically, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• I show several problems with extensions does not not after the last CC PS upgraded.

  USM double, for example, as well as several others are not loading any method. No problem before the major CC PS upgrade in June. Remove and reinstall does not work, manual installation discouraged with Panel of Exchange etc.

  I really don't want to track and communicate with each author to see what the problem is that it looks like more systematic

  They are not installable in the application of obsolete Plugin Manager. They show as purchased on the new CC web add Manager, sync is on, but only a handful are in place such as Kuler and AdobeEMailer. Double USM for example is supposed to appear on the filters menu (and not before the release of June), but he isn't.  There is no error log I know for this kind of failure that seems all hidden in the web cloud CC process to add ons and extensions.  What seems to be the addons and extensions start appearing as they upgraded to the new version. This looks like the case with Double USM, which is now available, but has been absent for a month or so after the release in June. So I see how it works as long as the extension developers playing catch up with Adobe, which is inevitable I guess and is something to know if extensions are an integral part of your

  workflow.

• Is anyone else having a problem with Navinet may not be compatible with Apple?

  Since January 2016, I was able to access Navinet with my Safari browser.  Navinet tells me that Apple made an update which is not compatible with them, and now I can not access the necessary information.  Now, their only solution is to download a new browser like google chrome.  This wreck will be havoc with Safari?

  In a traffic jam says:

  Since January 2016, I was able to access Navinet with my Safari browser.  Navinet tells me that Apple made an update which is not compatible with them, and now I can not access the necessary information.  Now, their only solution is to download a new browser like google chrome.  This wreck will be havoc with Safari?

  Download another browser will do nothing for Safari.  I suggest however you do not download Chrome - go with Firefox, if you wish.

• Problem with wrt54gsv5 does not

  Had the router for a little over 2 years and had not had any problems, everything worked fine. I never turn off my modem or router. They have always been on since I installed them.  Now, my wireless router it does not transmit.  Rigid cable connections work. I unplugged the router, reset the router modem (cable ISP have), connected (also reset it) my laptop picked up but not even half a minute, and again, he was gone.  any suggestions?  Is there a my wireless phone? Please notify

  Thanks in advance

  dalm67

  Try to readjust the settings of your router wireless... Open the Linksys configuration page by typing 192.168.1.1 in the address bar of the computer by cable.

  Click the Wireless tab, set the wireless network mode must be mixed... Provide a unique name in the name box of the wireless network (SSID). Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings... Click the sub-tab under wireless > Wireless Security... Activate WEP and enter the 10 digit number as password network in Key1.Click on Advanced Wireless Settings, change the tag to 75, Fragmentation threshold to 2304, interval RTS threshold to 2304 and click 'Save Settings '...

• Problem with DateTimePicker does not extend correctly

  Hello

  I am currently tinkering around with some of these shape objects and I put a DateTimePicker control in my code QML.  It shows very well with the current selected date, but when I click on the selector to change the date, it only shows the top line of the day/month/year scrolling wheels.

  Here are two screenshots (before/after) what is happening:

  http://i.imgur.com/1PuWM4s.PNG

  http://i.imgur.com/aDiIZ3a.PNG

  Here is my code QML:

  {Page}
  title bar: title {} bar
  Title: 'add a Transaction '.
  }
  {Of container
  background: Color.create ("#e4f3f9")

  {Of container
  horizontalAlignment: HorizontalAlignment.Fill
  verticalAlignment: VerticalAlignment.Fill

  topPadding: 20
  leftPadding: 20
  rightPadding: 20
  bottomPadding: 20

  layout: {DockLayout}

  {Of container
  ID: screenInfo
  verticalAlignment: VerticalAlignment.Top

  {Of container
  {Of the DateTimePicker
  Title: 'Date '.
  }
  }
  {Label
  text: qsTr ("create a username :")
  textStyle {}
  color: Color.create ("#545454")
  }
  }

  ....
  }
  }
  }

  {} / / end of Page}

  Sorry, it seems formatting turns to garbage here and none of the standard codes to insert bb code seems to work.

  Hello! This happens because of the DockLayout. Control date doesn't have space to expand to the. Use a top-level ScrollView and set the vertical container with StackLayout inside.

  If it is not all available space horizontally, add preferredWidth: infinity setting.

  There is button layout of the code on the toolbar.

• Problem with VCB does not

  Hello-

  I using VCB 1.5 update 2 to make backups of a few virtual machines and until I upgraded my hosts 4.1 update 1 (8.3.7 build 381511) and eventually my VM to the new VM tools things worked well.  All my VMs running Windows 2008 R2.

  Once I have updated to the latest VMTools, I started getting the "error: cannot open the disk: NBD_ERR_GENERIC" error.  Research on it points to disable "disc. EnableUUID', which does not, but its my understanding is that disables application Quiesce, I need because of servers running a database.

  As I troubleshoot-made the question, I found if I rolled back the version of VMTools back to the latest version of the 4.0 tools (4.0.0 build 398348), VCB starts to work again with 'the drive. EnableUUID' set to True when running on the host computer 4.1 (just shouted at me that my version of the tools is outdated).

  Are there other work autour, I have not yet found this or I'm stuck running the old version of VMTools until a later version to test?

  Thank you!

  Support for VCB will disappear in favor of the storage API. Rather than wait to see if there is a difficulty, I would start by looking at another way to save. Many backup products have added support to use the API. If you have a license for this I also glanced at the VDR unit. http://VMware.com/go/data-recovery

• Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

  Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

  The plugins are up to date.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes