I'm having problems on how to charge my battery on my inspiron dell could help you
tried the power setting 4 power options is currently set to primary, the light on the front flashes red and green
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Is worn or old battery?
Check with Dell Support, their drivers and documentation online and ask in the Dell forums
for problems known.
Dell support
http://support.Dell.com/
Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS
Dell forums
http://en.community.Dell.com/forums/
===========================================================
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).
In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.
Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.
New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.
I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.
BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.html
Another good program
Vista battery saver - free
http://www.codeplex.com/vistabattery
Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settings
You can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.
============================================================
Try this - to make a Restore Point
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
(who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
Stacks.
Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settings
I hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you
Have you tried:
Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
How to charge the battery to split x 2
in my hp splitx2 how to recharge the battery after 1 get fullly battery then only 2 gets battery .my question being made the damage from battery 1 more load, even in the case of discharging.and how to hp requires 8 hours of battery life when he worked as a laptop.
OK, since the draw, including hp knows... my #1 battery (the Tablet) 84%, battery #2 (base) 1%...
removed from the Tablet and load the base... worked... but I think that it will not overload or the other battery when they are 100%...keep check the battery levels and see if it says "plugged in-no charging in progress" when one gets to 100%...
-
Battery problem. How to reach 100% battery?
Seem to be able to have 100% battery power, have message when click on the battery icon of "battery 50% available (plugged in, does not support).» How to reach 100% battery?
Hello
References to Vista also apply to Windows 7.
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.================================================================
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have online forums.New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Battery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to charge the battery if the power input is damaged?
The decision-making power on my 4070CDT satellite was damaged and the laptop will no longer take power or charge the battery from this socket. (Attempts to re - solder the joint damaged power detection circuits!)
Does anyone know if I can feed the appropriate voltage (10.8 v?) to the battery contacts in the battery casing to keep the laptop going, and if so, which comes into contact with and what tolerance on the voltage?
(Application of 12v through the + ve and a particular contact - EV seems to persuade the power management software, it runs on sector without battery, but after 20 seconds the laptop turns off.)
Any ideas? Thank you.
Hello
In my opinion to do something like that, you have to be an expert and know very well the construction of the motherboard and electronic load.
Sorry, but I don't see a great chance to do that successfully. Try to contact the Service partner. Perhaps, they can give you a useful tip.
Good luck!
-
How to recharge the battery of digital camera WX220 disc Cybersht
Cyibershot Sony to the Canada WX220. We live in Italy... How to charge the battery he's dead?
Don't have a charger battery here in Italy and could not find one in the store
Try to use another USB port on your laptop (if it exists) and see if will charge. Some laptops will have 1 USB port with a higher output voltage. If you can not always charge the battery, then you need to get a charger. Check in other stores where cameras are sold locally and see if they can help you. If this isn't the case, then you will need to order one online. With a good charger if it still doen't load so its likely you will need to have the camera repaired.
Edit: Also make sure that your laptop does not go to sleep while it loads.
-
Satellite L500-12V - trendy but do not charge the battery
Hello
I have problem with my battery. Says this computer system is "plugged in, not charging." When I click on the battery info it says available at 26%. When I try to start the computer without the charger is plugged in, it does not work. If I plug in charger when the computer is turned on, it is turn it off. Is my battery dead already or it is problem with charger or something else?
Sorry for my bad English.
Hello
What battery LED on your laptop? If you plugin the AC/DC adapter is this light on or off?
Can you charge the battery while the laptop is turned off?Generally if Notepad starts with the charger plugged in the charger works properly and that the problem must be the battery itself or in the worst case the control of load on the motherboard :(
On the Toshiba site I found an interesting article:
[I have trouble to charge my battery to 100%. What could be the problem? http://APS2.toshiba-tro.de/KB0/FAQ35007K001ZR01.htm] -
Charger plugged in but will not charge the battery.
Original title: PC does not load
I have my pc is plugged in, but it won't charge my battery<>
I have my pc is plugged in, but it won't charge my battery<>
Hello
It could be a number of reasons of a battery discharged to a problem with the charging circuit.
You neglected to mention which version of Windows you are using.
You can create a detailed report on the State of the battery to double check the battery status.
1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.
2 in the command prompt window, copy / paste the following command.
powercfg-energy-output %userprofile%\desktop\energy-report.html
Press ENTER.
Wait for the command to complete (usually about 2 minutes).
This create a file named energy - report.html and place it on your desktop.
3 go to your desktop and double-click the file to open.
Scroll to the bottom for the battery: battery information section.
You will see:
Rated xxxxx
Xxxxx full last Charge
(Where xxxxx is a number)
Copy this article and paste in an answer here, for analysis.
Concerning
-
I would like to know how to calibrate the battery from the computer? Please help me.
You give all the details on your computer.
Contact computer desk mfr of support, as in their forums, or watch its knowledge base / faq.
-
Hello, my name is Elias. I'm having problems with Adobe Creative Cloud, I wrote an email is not correct and I can't change it. How to fix it?
Hello
See the following topics:
Bad e-mail address to sign in to Creative Cloud Desktop, how to pass to my email address?
CC has a fake email, can not change
Hope that helps!
Kind regards
Sheena
-
I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?
See here:
-
Having problems loading google
Its been a week or two that I started to have issues loading youtube. Later, I started having problems loading google as well. Its very annoying and I don't know what is happening since no changes were made on the system. Its touching all my apple products connected to my wifi.
I removed the cache, history, cookies and tried different browsers and nothing suits him.
Yesterday, I actually changed my DNS servers and it fixed it momentarily, but now its still doesn't work.
Any of you have an idea on how to solve the problem?
It does not google, gmail etc. But he has no problem loading what anyone else. The message also said the following:
Sara can't open the page "www.google.com" because he has a server that hosts this page does not.
-
Equium A100 - 027 PSAAQ - having problems with WiFi Internet access
Just installed Windows XP Home edition on my Equium A100-027 (PSAAQ) Vista didn't like. Now I'm having problems with Internet access. Should what drivers I download and how to install?
Thank you.
Hello
I suggest you to check the site toshiba driver
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jspYou can search your machine and download the wlan drivers. If you don t know that you you just all download and install ´em, one of the drivers SHOULD work. ;)
Welcome them
-
I use an analog input on a PCI-6224 and are having problems with the clock source
I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.
That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.
Single point NI the hardware is for PID control with a real-time operating system.
-
Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...
Hello
Answers can probably help if briefly you questions answers - Windows Forums for your
version of Windows. Please provide all the information we need to help us help you.Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows/ForumHow to ask a question
http://support.Microsoft.com/kb/555375====================================================================
Call Service customer Microsoft direct-1-800-642-7676-heures 05:00 til time 9 PM PST (USA).
Contact Microsoft Customer Service
http://support.Microsoft.com/kb/295539Microsoft support - contact us
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - Microsoft Technical Support phone numbers
http://support.Microsoft.com/kb/319726/en-usMicrosoft - email us
http://support.Microsoft.com/contactus/cu_sc_selector_email?ws=support%2csupportOptions chat or telephone of the solution - top-right - Windows 7 Center
http://support.Microsoft.com/ph/14019#TAB0Microsoft - product selection solutions centers
http://support.Microsoft.com/select/?target=hubSolutions Microsoft Fixit Center
http://support.Microsoft.com/FixIt/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
FF print some pages starting in the middle of the page (shift of half of the page). Setting the left margin in the box printer dialog does not change the behavior.Example: https://www.clickandbuy.com/DE_de/ueber-uns/datenschutzcookies.htmlAny help wo
-
DVD tray opens on the Satellite C650
Hello I'm sorry if this question has been posted before, but I can't get my DVD tray to open without having to stick something in the small space. When I try and open it normally, a little light beside the button just flashes orange. How to solve thi
-
TP 8 - drifting a Win 10 update?
Hello, Lenovo, My Thinkpad 8, OS Win8.1 not offered me a updated Windows 10 in all. According to Microsoft, it will be free for all authentic devices with a system running 8.1. See: http://www.microsoft.com/en-gb/windows/windows-10-upgrade updates on
-
white screen on startup of windows 8 menu &; Desktop_SVF15213
-
Windows 7 I cannot email from Craigslist sellers to ask questions on the point here.