I'm having problems setting my computer to a restore point

Similar Questions

• can the stage 2 audit be setup if I am located in Barbados? Having problems setting up keychain

  The Keychain can be put in place if I am located in Barbados which is the Caribbean?

  What you're trying to do with the keychain and what are you having problems?

• The problem of creating a new system restore point.

  I get the error message 0 x 80070032 when I try to create a restoration point Vista SP2.

  "Could not create the scheduled task for the following reason.  The request is not supported. (0x80070032).»
  
  I have not recently installed any software security, as was the case in a previous post.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - type in the area of research-> Services find top - make a right click on - RUN AS ADMIN

  Double-click on each one and set as indicated:

  Automatic started Windows event log

  Task Scheduler started auto

  Backup Windows stopped manual

  Also other security/antivirus/antispyware products and Nod32 have been known to cause this problem.

  If you still have questions set ALL your services to the DEFAULT is listed here:

  BlackViper
  http://www.blackviper.com/WinVista/servicecfg.htm
  ---------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Why my computer displays a restore point (dated today ' hui), even when I click on show other points of restoration?

  I'm trying to restore my computer to a previous point, because it's strange (temporary is assigned to some users and the computer itself freezing). I did it before on an older computer which ran on XP. But my current Windows 7 system gives me only a restore option, which is not because it has been established today. I thought that the restore points were set automatically - is this not the case?

  To save space, Windows will only keep the most recent points created successfully.  You can increase the storage space reserved for them to increase the stored number.  Always by default, he is very aggressive and will remove older, or when a change is made that invalidates a point.

• HP laptop computer has no restore points, how can I get as long as the factory

  Computer was working on, they must have cut off System Restore. Now, I have no restore point and says I don't have enough memory, but I do, so I can't do anything! I need to restore to the factory. can anyone help?

  Hello Brenda Rawls.

  Restore points take back you to the factory settings.

  Press F11 at startup to start the process of HP recovery to return to factory settings.

  The process is illustrated on this HP link.

  Also read how to make your own recovery in the event of future failure of hard drive disks, etc.:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&cc=us&DLC=en

• Im having problems with my computer. My computer needs to install the important updates 13 but every time is about to complete, a message appears saying error found and I don't know how to fix this problem.

  I did not any changes to my computer.
  This "error" is displayed whenever the computer tries to update.
  It says code XXX.
  And I like many updates that says they don't have to settle.

  Hello

  You must always specify the actual error codes.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Having problems setting a timeout of session for wireless LANs

  I'm setting up a WISN with software version 4.2.62.0.

  So that the implementation of wireless local networks, I'm putting in place a session of 12 hours (43200 seconds) time-out value on the tab 'Advanced' edict WLAN.

  However, when I hit 'Apply' and go back in the same edition of WLAN, the timeout value back to 0.

  I tried to check "Allow AAA override" but that has not solved the problem.

  Anyone know how to get around this problem or resolve?

  Thank you.

  Try putting in the CLI and check it took... could be a problem with the code of 4.2, since it's fairly new :)

• having problem setting textinput

  OK so here's the thing...

  I am currently trying to install a qnx text cursor as I need to have only the numbers being registration...

  I have install a cursor using the uicomponent and therefore, it is perfectly fine, but when you try to add the textinput, it does not appear!

  does anyone else have this problem? or did someone knows how to solve this?

  all this is in a mxml btw file

  WOW nvm I managed to do work... the really really really strange thing... I had to put its alpha = 1 and activated = true... which I never said than 0 or false anywhere... so im wondering how everything went... but anyway his works now!

• Having problems setting up a 5.5 vCenter Server VM in a domain configuration...

  I'm trying to implement a vCenter Server VM (new installation, no upgrade) without an Active Directory domain that is available.  I was able to do this successfully in the past with 5.0 and 5.1, but now with 5.5 I have problems.

  Installing SSO works fine and displays warnings expected that the server is not on a domain and the certificate will be bound to the INVESTIGATION period.

  When I then try to run Setup from the inventory Service, it fails when you try to connect to the SSO:

  "Could not connect to vCenter Single Sign On.  Make sure that the Search Service URL points correctly to the vCenter Single Sign On the instance that you installed.  If vCenter Single Sign-On is installed with an IP address, make sure that the IP address is specified in the URL.

  5.0 and 5.1, in order to get this installation runs correctly, I would like to enter the IP address in the URL (as it says in the error), and he'd be fine.  So the address provided for the Research Service URL is https://< ip_address >: 7444/lookupservice/sdk

  I tried several variants for the fields of FULL domain name and URL of the Service search without success.

  Can someone confirm a successful for 5.5 off-field installation?  And if so, try to direct me in the right direction?

  I end up doing work, it turned out to be an order of operations issue.

  I tried to install SSO, then service inventory, then Web Service, then vcenter Server.  And on a domain, this order actually worked well.  For some reason any, when not on a domain, they must go SSO-> Web Service-> Service-> vCenter Server inventory (this command works in both scenarios, just to be clear).

• Having problems setting the objects in the page model

  After struggling with these days, I could use your help. I have a page that I need to make some minor adjustments object, I created. I want to center the clock flash under rotating photos and move it up so that it does not block the blue shadow. Also, I want to make "new skates and updates" box under a single box with framed left news. Whenever I try to make these adjustments, causes everything to move around. Any suggestions on fixing this would be appreciated.

  http://www.rideskat.org/index3.html

  Add immediately after

  This should solve your problem of alignment.

  In addition, the same line, you have a redundant . It is before. We do not use this markup now. Delete this.

  The color of the area 'subcontent ':

  In the CSS for #subcontent:

  Change this:

  {#subcontent}

  Clear: both;
  color: #FFF;
  overflow: hidden;
  background-image: url(#085AA4);
  }

  to do this:

  {#subcontent}

  Clear: both;
  color: #FFF;
  overflow: hidden;
  background: #085AA4;
  }

  Good luck.

  -ST

  EDIT: To request the withdrawal tag

• Having problem bing as my toolbar setting. Cannot find the menu box

  having problem setting 'Bing '.
  
  

  Having problem bing as my toolbar setting. Cannot find the menu box in Google Chrome according to your instructions

  Hello

  • What is the version of the Windows operating system?
  • Are you facing this problem only with Google Chrome?

  Check the problem with Internet Explorer and post your result.

  However, if you use Google Chrome, contact Google Chrome support team.

  http://support.Google.com/chrome/bin/request.py?&contact_type=contact_policy

  You can also post your query in Google Chrome Forum: http://productforums.google.com/forum/#! forum/chrome

  It will be useful.

• I have problems with my computer starts

  Original title:
  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs
  -----

  Im having problems with my computer, I clear thread as my wireless provider and do not know if my connection is causing my programs not answer and slowly run my computer or if simply virused im.

  Hello
   
  You can use the following methods that can help you solve your problem:
   
  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Problem setting transition duration first pro cs4. Is this a bug?

  Hello world

  I have made a project of first pro cs4 and I'm having problems setting the duration of transitions between clips. I have my default transion set to cross dissolve them and 15 frames in length. When I try to lengthen, it seems that first makes two transitions in instead of a longer one. So, if for example I got a clip with a dip to black when I extend more than 15 default images to say 30 images I get two separate transitions one after the other instead of a long. I know it's difficult to understand so I downloaded the video on youtube. If fast forward you to the minute 01:20, you will see the latest bland given away with a dip to black transition and the you'll be right flash a bit after the last light disappears. I hope someone can help me solve this problem, as I'm completaly lost. Thank you :-)

  Work waaay too hard at this, dude.  Just use the default chained.  It gives you good fade to the top using all 24 images, no adjustment necessary.

• Setting System Restore Point works only with Win XP SP2

  I use Windows XP Professional SP2.  My System Restore Wizard does not work.  I am not able to set a Point of restoring using the wizard.   A suggested fix was to disable the system restore and then turn it back on.  This has created more problems because all the previous System Restore Points have been lost.  How can I get my assistant to restore the system to work again?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Having a problem with my computer I try to restart and get BSOD saying internal error Planner video background

  Original title: Blue Screen of Death (BSOD)

  Hello im having a problem with my computer I try to reboot and I get BSOD saying internal error Planner video background

  Here is my mini dump file:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4807 & authkey =! AGKWUp-ndI0XBgE & ithint = the file % 2cdmp

  and here is my system info:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4810 & authkey =! AFloWJarqiE83QM & ithint = the file % 2cnfo

  im hoping that this will let you know what is wrong or not

  RW

  This phenomenon was linked to your video driver (atikmpag.sys) /DirectX.  I would completely remove the current driver and install the latest driver available.