I'm hosting Vista update and when I end my session I get the message to install the updates and stop, over and over again

Similar Questions

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In Windows Media Player 11 when spend to add songs, how get the list to stop starting at the top?

  With WMP11, when adding pieces of the current reading library, I often change between two tabs. My question is every time I switch back to the library to add more songs, tab how can I get the list to stop starting at the top? I have a number of songs scrolling on there where I left last can be very inconvenient. I remember with an older version when you leave the library, that he would stay where you left it. Yet once, how can I stop the library always start at the top and instead pick up where I left off?

  Thank you very much

  Reinstalling wmp11

• I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the check disk error

  I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the following message and there's like this. I tried to cancel the disk check with in 10 seconds by pressing a key, but it still is not.
  Message:
  "Checking file system on C:.
  The type of the file system is NTFS.
  One of your disks needs to be checked for consistency. You can cancel the disk check, but it is highly cool that you continue.
  To check the disk a press any in 10 second (s). »

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Recently purchased captivate subscription 9 and installed on mac. When I try to open I get the message ' to open Adobe Captivate for must install legacy Java SE 6 runtime. " I followed the links and recommended all intalled the update of Java. How the % $

  Recently purchased captivate subscription 9 and installed on mac. When I try to open I get the message ' to open Adobe Captivate for must install legacy Java SE 6 runtime. " I followed the links and installed all updates Java recommended. How the % $# & not one open and use 9 Captivate? Any suggestions?

  Hello

  This link may help: easy to install Java SE 6 Runtime | Mac OS 10.9

  Kind regards

  Sheena

• I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, plea

  I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, please.

  Safari maxes in a version of Mac OS x.  New version of Mac OS x would be needed for the new version of Safari.

  Firefox is not limited within an OSX and probably has a version that works.  Chrome may as well but is a Devourer of resources.  Opera is a third option.

• When I try to sync, I get a message that I need to update iTunes.

  When I try to sync, I get a message that I need to update iTunes. I used this button on iTunes 11.4 since it was bought, then today he refused to sync. I deleted and restored, which erased all the data and my music. I always get the same message, but now I have a Clipboard instead of a key. Any help would be appreciated.

  iOS 9 does not synchronize with a version of iTunes below 12.2. So, you've been 11 iTunes syncing, but once you upgraded to iOS 9.x, the required level of iTunes has changed.

  You will need to download the latest version of iTunes to synchronize.

  Great win by the Packers, BTW!

  Good luck

  GB

• When I'm looking online, I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.

  Hello

  I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself.  I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank you
   
  Original title: help again...

  I have moved your question to area drivers & hardware.

  If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740

  Updated drivers can be made of:

  https://Downloadcenter.Intel.com/default.aspx

  Best bet may be to contact the vendor of PC.

  -steve

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on

  I have DC Acrobat and run it on Windows 7.  I have a Brother printer.  I downloaded the new drivers last night, but the same problem occurs: when I try to print, I get a message in a dialog box, "the cocument could is allowed.  When I click on out of the box with this message, I get a different dialog box including the message says "it has not chosen to print pages".  Any suggestion would be appreciated.

  The way I got it to print has been:

  Without opening the program, in the list of applications, move on to Adobe Reader and right click, select Properties.

  Go to the compatibility and click 'run as Admin '.  Reopen the application and all prints for me now.

  (This can only work with your personal computer if?)

• I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message 'Install' is corrupted and cannot be opened. You must eject the dis

  I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message "'Install' is corrupted and cannot be opened. You must eject the disk image. "Someone knows what's going on? I tried to download with Safari and Firefox, but the same thing happens.

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  Thanks - Yes, it's the LR5.

  2 hours on the phone with Adobe technical support, it is fixed.

  I guess it was a mistake with the original installation.

• Have FF 15.0. When I open FF I always get next message: Norton Cofidential does not support FF 1.5, as if I had 1.5. That is what it is?

  I have 15.0 FF. When I open FF I always get next message: Norton Confidential does not support FF 1.5, as if I had 1.5. How can I fix it. Have I not a secure site?

  This is probably because Firefox 15 is in beta, so norton has not yet added full support for it. I would except them to update their software in the next 3 weeks (15 Firefox gets released in about a week and a half).