I'm looking for on which has been downloaded to my computer?
Is there a way to track downloads by file type? I had 171 MB of data downloaded in a period of hours last night and have no idea of what it could be!
Hello
Maybe this can help.
http://Windows.Microsoft.com/en-us/Windows7/find-a-file-or-folder
Tags: Windows
Similar Questions
-
* Original title: Windows 10
I was on my laptop when I get that annoying pop about 10 Windows and X is turned off. Today it pops up behind what I was watching and by chance I saw because 10 Windows has been downloaded to my computer as a virus. What you want to put this on my laptop, like that, without me hitting a button you never try and hack my laptop without my permission. If you want to explain 10 Windows it's good.
It is a forum for peer-to-peer volunteers public World Wide web.
Essentially, you missed (or simply press the 'X') the message you plan / cancel the upgrade. It is more a case of 'you don't say no... " (that does not suck).
Learn more about that here:
Basically (with some variations) three ways to restore your computer to a previous operating system, once it has been upgraded to Windows 10...
* Best method: restore using a full image backup of the system that you have created in your normal computer maintenance tasks. If you do not do so during your normal maintenance, you should probably expand it once you get things in the State you want. If you've done one, but still need help to apply it, just answer here and someone can / will surely help you.
Possible next method: (with reservations as being less than 30 days since the upgrade, you having not done anything that would affect the three necessary directories to restore like disk cleanup or or using online media creation tool) use integrated Windows 10 to your previous operating system recoverability. The following link will take you to a web page that explains this method pretty well and completely:
http://www.CNET.com/how-to/Windows-10-how-to-roll-back/Possible next method: use your installation media/recovery media to restore the system to the factory settings and update/install other apps using their media and restore periodic backups / consistent personal and other data. It is a CLEAN INSTALLATION (from scratch).
-
I just got computer and "Quicken PDF Printer" has been installed but I can't print without computer paper. I get a message titled "20". Help
Hello
See the link below to fix the problem.
Error codes: '-20' and "-30"when printing to the printer PDF of Quicken."
http://Quicken.Intuit.com/support/help/printing/error-codes---20--and---30--when-printing-to-the-Quicken-PDF-printer/GEN82190.html -
you have my permission to connect to my laptop to do what must be corrected. Thank you
Hello
I'm sorry, but we do not dial out.
We provide the information that you can use yourself.
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you here what Service Packs, if any, are already installed.
Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
And if you have any problems:
There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
See you soon.
-
How to configure thunderbird now which has been downloaded to android Tablet
Samsung galaxy tab pro 8.4. I guess it down loaded ok I can use?
Thunderbird is only for Windows, Mac OSX and Linux mozilla desktop computers.
-
This account email is [email protected]
Cinthia,
Here are the links to download versions of Acrobat:
Acrobat X, XI | 9 standard| 9, 8 | 7
Because you're allowed to install the software on two computers, just download, install and enter your serial number.
Kind regards
Guinot
-
I get the above codes when I try to update. I also can't install a program such as itunes after that which has been downloaded to my computer. This applies to everything from the internet being downloaded. I did some research and tried to fix hours and hours away without success. Please someone HELP with a real answer! I need to get my computer works normally again so that I can follow my school work! I did a fresh install of windows 7 using the partition on the hard drive recently emergency, and the problem is still there. Before that I tried recovery many times scandisk which takes much too long for no result, and update my antivirus definitions, which I am not able to download at all, then of course they usually download either.
Hi Fabreezeo,
· What is the error message or the error number that you receive when you try to install programs?
· What type of Internet connection you use?
· You receive this error message when you try to install a particular update?
· Have you used to install own USB or CD/DVD?
Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
How to reset the Windows Update components: http://support.microsoft.com/kb/971058
Another link, you can check: http://support.microsoft.com/default.aspx/kb/947821
You can even check out the link below: you cannot install some programs or updates: http://support.microsoft.com/kb/822798
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How can you tell if a type of keylogger has been downloaded on your computer__
need to know if a keylogger has been download on my computer
Use a virus scanner or anti-malware protection software.
run regedit command in your start-run and find(Ctrl+F) the name of a keylogger.Or run services.msc for related information. -
I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?
You have a corrupted user agent which identifies you like Firefox/3.0.11
- Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor
See:
-
How can I reinstall the demand for 'People' in windows 8, which has been accidentally uninstalled by me?
You can reinstall it from the following link:
-
Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the tab cancel the plan to manage the website of adobe India tab. Help, please...
-
9.0 pre-installed VMware I installed in my laptop. I created a 5.0 as a VM ESXi in workstation. And I installed vSphere client 5.0 in my laptop. And I am able to access ESXi from my laptop through the vSphere client.
Now, I created a VM with Windows 2008 R2 on top of ESXi. I installed vCenter 5.0 in Windows 2008 R2 Machine. I have just to connect to vCenter using vSphere client (which has been installed in my laptop) and added ESXi as host in the inventory.
Now, I created a VM with Openfiler. Everything is fine. I want to use this Openfiler as a storage array, and I want the SAN with ESXi and Openfiler configuration.
I think I need to create a VMkernel port group and attach that Openfiler VM who. And if I want to access the Openfiler web interface, do I need to have internet access? We can access the Openfiler Web interface without having access to the internet?
Can someone let me know how to connect this Openfiler as a storage Bay for ESXi and configure a San.
Openfiler does not need Internet access and you do not require an additional VMkernel port for access. If it's production, you share the management and traffic on NIC iSCSI physical separate and thus vmkernel ports. In this case, it is not necessary. Did you do the initial installation of Openfiler to create a LUN for the ESXi host access?
-
HP psc 750 color, which has been filled, cartridge will not print.
HP psc 750 color, which has been filled, cartridge will not print. Using Windows Vista. Get the message "check color cartridge". Only change to the system was making filled the color cartridge.
Performing the procedure online electrical contacts cleaning service twice without a bit of luck.
Looking for suggestions as to how to solve.
Hello. Since the hard reset is not; I would try a new cartridge at this point. The hard reset is one of the most powerful tools when it comes to correcting hardware related problems and error messages.
-
I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
Can someone help me solve this problem?Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. But I guess it's too late for this for so long that there are probably no so old restore points.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking). Then we will check some of your system files:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.
If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html. From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).
If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc). You can have a lot of updates to re - install (including all you need to remove service packs). If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.
I hope one of these procedures can solve your problem. If this isn't the case, after return and we will try something else. Return message anyway so we know how it turns out.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
-
How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. " Another driver can provide this functionality. (Code 32). »
I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)
Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?
If so, what is 'Data' for these names?
Maybe you are looking for
-
Problem with the Exceptions of blocked content preferences
I got an email from [email protected] and get the preferences dialog. I add amazon.com as a site authorized in my Exceptions list. I left 31.2 TB on Mac. I have restart TB. Yet the email will not show images. I add images - amazon.com as an exceptio
-
How to make my homepage of mode full-screen in order to access my toolbar and use my computer.
-
an ipod is detected but could not be identified correctly
-
Dear all, I want to purchase the software labview 8.6 for my research of machine vision. So I want to know that the Labview 8.6 included with Vision Assistant as IMAQ or should I buy IMAQ separately. Thanks for your help.
-
I run windows xp pro sp3