I'm looking for voltage reading VI demo

Similar Questions

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

  Hello

  I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

  Any ideas, please?

  Hello

  I did a system image (drive C :) and a rescue of dvd of Windows 7) Cool, it uses a Volume Snapshot.

  Then, I installed the Vista 64 bit drivers successfully.

  The drivers are:
  -ENE PCI Memory Stick Card Reader Controller

  -Card Secure Digital ENE PCI / MMC Card Reader Controller

  -AuthenTec Inc. AES2501A (fingerprint)

  -Trust Webcam 15007

  Unfortunaly, the imprint does not work. I thnik my fingerprint is not compatible with the new Windows Biometric Framework (http://windowsteamblog.com/blogs/windows7/archive/2009/01/08/windows-7-puts-it-s-finger-on-enhanced-biometric-support.aspx)

  Thank you all, bye.

• Hello, I am looking for driver for card reader memory vgn-fz250e for win7 64-bit

  Hello, I'm looking for a driver for card reader memory vgn-fz250e for win7 64 bit, I downloaded all the driver on your Web site and try, buy does not work, can you tell me which one is right, thank you very much!

  Try this one from HP:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

  Other people have said that the HP driver works fine with 64-bit Vista VAIO.  If it doesn't work no, just roll back the driver in Windows Device Manager.

• I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? T

  I just paid to upgrade my acrobat reader, but it will not convert into Word because it is more than 100 MB. Just lost an hour of signing up and looking for help contact. How to cancel it without you guys give money for misleading me about your product? Thank you!

  ICES.html https://helpx.adobe.com/x-productkb/Policy-Pricing/Cancel-subscription-Acrobat-Online-serv

  You will need Acrobat to convert files > 100 MB.

  [subject moved to cloud Document PDF Services forum]

• What is the difference between DC of Acrobat Reader and Acrobat Standard DC? I'm looking for the function to extract pages of large documents.

  What is the difference between DC of Acrobat Reader and Acrobat Standard DC? I'm looking for the function to extract pages of large documents.

  Acrobat Reader is just a viewer/reader PDF; It cannot modify or create PDFs.

  You will need Acrobat Standard or Pro to extract pages from a PDF.

• Looking for an older version of Adobe Reader

  Hello

  I know it is not the right place to ask but I'll give it a shot anyway. We need to install a software client/server exam which seems to be linked to a specific version of the Adobe Reader (ie. 6.0) software during installation.

  I have contacted the software support and they recommended I should roll back to Adobe Reader 6.0 to satisfy the dependency hard just for the installation. After installation, I can install the latest version of the player.

  This is far from ideal, but there is no other choice. We use this platform to review.

  Now I can not find any place where I could download the 6.0 version. I came across some sites, but they looked a bit dodgy. Is there an official of (semi) archived versions of Adobe Reader source so that I can download the version 6?

  If not, can you recommend a website that won't budle with malware, etc.. ?

  Thank you very much.

  concerning

  Portia

  Ok. A person has provided this link to answer another question.

  FTP://FTP.Adobe.com/pub/Adobe/

  That's what I was looking for.

  Detective Conan.

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• Looking for an old file in Illustrator, please read!

  I've been using Illustrator for YEARS, and I'm looking for an old file which has been placed on one of the drives Illustrator version (I think it was v8 or v9) he was resident certificate which was a Peacock or phoenix or some other birds. in any case, I have my records have sought for more than 2 weeks and can't find my old records, I lost track of them after update to CS3 and CS4 now. My question/request is, does anyone have this file or know where I can get it now? Or someone would be kind enough to send me this file? I would be very grateful! Thank you!

  [email protected]

  Is that what you are looking for?

  I found it on my CD AI 10. I don't think that anyone want my post here.

• Measurement of differential tension for voltage range 0-20 V

  I'm trying to understand the best way to measure the internal tensions in a pile of electrolyser containing 10 cells.  Voltage range is 0 - 20V, with each measure 0 - 2V voltage differential.   I know that each module on a NOR-DAQ (6218, 6210, 6009, etc.) can not see voltages greater than 10V.    If I use the AISense or the second Chamber of the ground to the high tension of the first 5 cells (~ 10V), I will damage the Board or which will allow me to reach the upper limit of 20V of the system.  In addition, I need to be able to measure the voltages at the same time.

  If there is a piece like hardware or the Commission on this topic, please let me know.  I write on the multifunction DAQ card because it is the material that I am familiar(-ish) with and that's what we have at home right now.

  Hi sbrawn,

  I recommend reading the high voltage and DevZone isolation measures.

  If you are looking for a DAQ hardware that has a range of over 10 V voltage, I recommend searching the catalog of products here.

• Looking for a driver and Power Meter solution.

  Hello

  I'm looking for a better time LabView real solution available for reading (or analysis) and storage of voltage, current, power, or PF too since a 110 V AC direct online. Any combination of pilot and profitable meter plug-and-play is available?

  Thanks for your time!

  
  

• Looking for an example of code - first_tab & next_tab

  Looking for examples of code, used in a dialog box, which uses 'first_tab' & 'next_tab '. Can anyone provide a copy of sample work that uses this code? Yes, I have read the reference books - do not understand and cannot operate.

  Thank you, in advance.

  OK, try this. You can place it in the mouse event to the top of a button:

  var demoDlg = {}

  DoDialog: function() {return app.execDialog (this);};

  initialize: {function (dialog)}

  var d_init = {/ / set the text of the field values to indicate their position in the tab order}

  "txt1": "second",.

  'txt2': '4 ',.

  "txt3": «First»,

  'txt4': '3 '.

  };

  Dialog.Load (d_init);

  },

  Description: {}

  first_tab: 'txt3', / / * this set the name of the first control in the tab order

  name: "Dialogue of the demo tab.

  items:]

  {

  type: "display."

  Width: 250,

  items:]

  {

  type: "display."

  Width: 240,

  items:]

  {

  type: 'edit_text. "

  item_id: "txt1"

  next_tab: 'txt4', / / txt4 will receive the update then

  Width: 200

  },

  {

  type: 'edit_text. "

  item_id: "txt2."

  Width: 200

  },

  {

  type: 'edit_text. "

  item_id: "txt3."

  next_tab: "txt1", / / txt1 will receive the update then

  Width: 200

  },

  {

  type: 'edit_text. "

  item_id: "txt4."

  next_tab: 'txt2', / / txt2 will receive the update then

  Width: 200

  }

  ]

  },

  {

  type: "ok."

  }

  ]

  }

  ]

  }

  };

  demoDlg.DoDialog ();

• Problems with three fingers looking for preview

  Hi all

  So I've upgraded to Mac OS Sierra the other night and it was absolutely great so far. However, there is a feature I noticed is either absent, either turned somewhere off the coast, and it is three fingers look upward in the preview. I'm at school and do a lot of my reading on a PDF in preview, and yes I just came across a few words that I don't know the definitions to. In the past, three fingers look has been one of the best features for its quick access to definitions. This is something I really miss and hope that it will be always possible somehow.

  Now, I noticed that it only worked in other applications as well, I went to settings and looked for the feature. I was able to find it in the settings of the Trackpad and he turned his back. That seems to have worked for just about every other app except Preview. If anyone has solutions to this problem, I'm all ears!

  Thanks in advance guys!

  It works for me in preview. However, it took several 3 finger taps to finally get the context menu with 'Look Up' inside to provide the result below.

  

• Looking for HDD recommendation

  I have a Macbook late 2007 and its HARD disk is dead. I'm looking for help with if you guys can suggest me a brand of HARD drive I can use on the inside. I saw ifixit.com and she a Toshiba 500 GB 2.5 MQ01ABF050. Hard drives as recommended. Is there another model?

  I've seen a few different brand of Toshiba drive HARD internal as MQ01ABD050, would that work?

  Help, please.

  This depends on how much storage you need.  You can spend with a HARD drive classic if you need a lot of storage up to 1 TB, or if you want you can go with an SSD of speed. You can get a HARD drive of 1 TB for what it can cost to buy a 250 GB SSD.  You can get the SSD more great but costs as much as your computer is interesting.

  If you are interested in an SSD is a good starting point: https://eshop.macsales.com/shop/ssd/owc you do not have to buy from them, but it will tell you everything that is involved with the installation of an SSD.

  For a HARD disk, I went with a Hitachi model in my MacBook.  I read reviews of web on sites like Amazon when purchasing technology (keeping in mind the people who do not have problems with a model are less likely to view only those who do and deserves to be done reading the negative comments to see if their complaint is justified), so any model will have some negative reviews.  For portable players with the ability, I wanted THAT HGST seemed to have the best odds.

  If you go for a HARD drive one other thing to consider is the rotation speed. Your old computer has a drive 5400 RPM in there. This consumes less energy and work more cost but, making it slower.  If you do not have to be also considering the battery life or temperature, you could install a 7200 RPM drive.

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »