I'm more able to send email - error message below. I have not changed any settings

Similar Questions

• Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  Why am I suddenly the following error message: "the specified location is reserved by the operating system and is not allowed. Please choose another location. "I've been recording all night and I have not changed the settings.

  toml12632875 wrote:

  I've been recording all night and I have not changed the settings.

  You have completed a disc to its ability, by chance?

• I am more able to send emails in Outlook Express, misdiagnosis: ' outgoing server does not.

  .. . Only receive them. It worked until a couple of days.  A diagnostic test says ' outgoing server does not... He asks me to return my password... I have are about running a new diagnosis and said "everything is now functional... but always coming out does not work."

  original title: using OUTLOOK EXPRESS I can no longer send emails

  Remove your e-mail account, close OE and then reopen it and add your account to mail back again and see if that fixes things.  If this isn't the case, then some diagnostic test you run must also explain that you can not control the SMTP server yourself, and if he has any questions, then you should contact the vendor of the SMTP server.

  Steve

• Outlook express is no longer will allow me to send or receive e-mail while even I have not changed the settings.

  These are the messages I receive:

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'POP3', server: 'smpt.tiscali.co.uk', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC0F
  and
  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'POP3', server: 'pop.tiscali.co.uk', Protocol: POP3, Port: 995, secure (SSL): Yes, error number: 0x800CCC0F
  .. .can someone help me please?

  Before hand: Tiscali is owned by TalkTalk and therefore requires the use of a 3rd party SMTP server to send mail from your mobile phone, in this case, we use O2.

  Name: Tiscali.

  Username: * address email is removed from the privacy *.

  Password: YourPassword don't forget: it's CASE-SENSITIVE!

  Email address: * address email is removed from the privacy *.

  POP3

  • Server: pop.tiscali.co.uk
  • Port: 110
  • Security: disabled (no SPA)

  SMTP

  • Server: smtp.o2.co.uk
  • Port: 25
  • Authentication: Yes
  • Username: * address email is removed from the privacy * (register)
  • Password: o2YourPassword
  • Security: off

  Note it is SMTP, SMTP not like in your error message.

  If the above doesn't fix it, contact the Tiscali technical support to ensure that the settings are correct.

• Whenever I send an email error message box comes up (with no message displayed)

  Whenever I send an email error message box comes up (with no message) and the email is sent to the Outbox, even if the email is actually sent and received by the addressee. Enamel and then continually gets sent unless I have delete the email from the Outbox file. Anyone know why this is happening and what can be done to remedy this? It's frustrating because I don't get a copy of the email in my file sent as back up.

  CrystalBall told you use Outlook Express. Fix? You have corruption of dbx files.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages b

  If I click on an email link in a web page instead of an empty message is opened I still get noise toward the top of the screen with a log-in for googlemail. I don't have and won't have a googlemail account. I just want to be able to send e-mail messages by using Outlook.

  See this article.
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• Windows 8 Mail will not add account - email/password wrong and sending emails error

  I experienced problems with the application Mail in Windows 8.

  SENDING EMAILS ERRORS

  First of all, whenever I opened the application where I have a hotmail account and an office 365, a banner message would appear at the top saying there was a connection to my account error and messages could not be sent to this account and 'check with your provider.

  Itself that question seems to have especially dressed with my hotmail account but it is on and off, this is the first problem.

  In regards to sending emails to my office 365 account, that I had the same problem and when I don't have this problem, there is another.  When I send an email I have press the button send and it zoomed off the coast but then it is still sitting in the Outbox or send in fact even if you press edit, then press on send again.

  ERROR ADDING ACCOUNT

  To try to rectify the email sending mistakes with my 365 office account, I deleted the app account and attempted to re-add.  I select the type of account 'Exchange' and get my correct email address and password but he always tells me that the password or email is incorrect.  I made sure these details are correct and they are, because they work when I login by normal web i.e. on Google Chrome.

  How can I overcome this error?

  Please help - it's frustrating!

  Hi Caitlin,

  Thank you for reporting this issue in the Microsoft Community Forums. As you are facing problems with sending emails and to add email account in the mail application, this can be caused if the Mail app is corrupt.

  To resolve this problem, I suggest you to run Applications troubleshooting and check if that helps. If the problem persists, you can consult the online Help article, which has steps to update of the app, app Sync licenses and reinstall the application. See: http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app

  Try the steps mentioned in the help article and let us know if that fixes the problem with the mail application.

• I can receive e-mail on Outlook Express 6, but cannot send see error message

  I can receive e-mail on outlook express, but cannot send see error message.

  The message cannot be sent because one of the recipients was rejected by the server. The rejected e-mail address was ' * address email is removed from the privacy *'. Subject 'TEST', account: 'mail.q.com', server: 'smtp.q.com', Protocol: SMTP, server response: 554 authentication has failed, have to login', Port: 587, secure (SSL): no, Server error: 554, error number: 0x800CCC79

  Go to tools | Accounts | Mail | Properties | Servers and check the box indicating your server requires authentication.

  Steve

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

  original title: Windows Help and Support link no longer works.

  Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

  Help topic "not found".

  This content under construction

  We were able to retrieve the requested topic. »

  The same problem also happens with IE8 help and Support.

  Hello TodAce,

  Please see the link below on the Microsoft TechNet Forums.  There is another user posted the same error message.  Please let us know status.

  Help and Support - screen text formatted correctly hyperlinks / missing

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

• How to uninstall Windows Live Mesh Remote desktop. I can't uninstall it & it continues to send an error message?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error messages
  How to uninstall Windows Live Mesh Remote desktop.  I can't uninstall it & it continues to send an error message?

  Hello

  What is the error message?

  If you have enabled Live Mesh Remote Desktop, you must be running Windows Vista as an administrator (a type of user account that allows full access to the computer,
  including the ability to install programs and manage other user accounts.) to uninstall the Live Mesh software.

  You can also post your query on the Microsoft Forums Live Community assistance as experts it will be in a better position to help you.

  Here is the link:
  http://www.windowslivehelp.com/

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot send emails. Message says "sending message failed because the connection to the server outgoing (SMTP) has expired. Is the fault with Thunderbird or BT?

  Cannot send emails. Message says "unable to send message because the connection to the outgoing (SMTP) server has expired." By default the SMTP seems correct. Any ideas how to solve this problem?

  Oh, we still think. Using anti-virus software? It scans your outgoing messages? Try to turn off the power; It can slow down transmission in order to trigger a timeout on the server.

• Error message - Sorry, we were not able to process your request.

  After signing on my Adobe sign account, when I click on the dashboard, it never loads, and error message - sorry, we were not able to process your request.

  Hi smithc31222655,

  The Adobe sign service knew some service instability can affect your ability to connect to the service.

  We are pleased to announce that the services Adobe sign has recovered fully and is stable.

  We are sorry for any inconvenience this has caused and appreciate your patience as we worked to solve this.

  Trust the site has been updated: Trust Center: security, compliance, availability | Adobe sign

  Please let us know if you need additional assistance.

  Kind regards

  Meenakshi