I'm stuck with a subscription that will not start on my operating system of El Capitan I downgraded to mavricks so I can use my full cc Adobe package (as is my work)... .it I won't launch the Mavericks either, as I just found out and I HAV

Similar Questions

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Windows Vista 64-bit with readers that will not start after disabling all startup applications and registry changes

  My Vista 64-bit system ran like a dream - until I tried to install Roxio Creator 2010.  When the installation failed and hung up, I stopped the installation with the Task Manager and rebooted the pc.  Following the instructions of blog users of Roxio, I did the following:

  1. selected disable all startup using MSCONFIG and restarted the pc applications.

  2 download and run the Microsoft Windows Installer CleanUp.

  3 remove the partially installed Roxio files in the directory c:\Program Files x 86, then made an export of registry before editing the registry.

  4. under the leadership of the registry - deleted file folder HKEY_CURRENT_USER Software Roxio and has attempted to delete the Wow6432Node folder from the HKEY_LOCAL_MACHINE folder but encountered an error - didn't note it, unfortunately, but basically he said that he could not remove it when it has been changed, after waiting a while I tried to delete the folder Wow6432Node whe even once with the same answer, so I closed Regedit and restarted the pc.

  The pc goes through the process of startup and hangs when it tries to start Windows Vista.

  5. I can't do a repair with the Vista disk - files are not present.

  Hello Ajay K.

  Thank you very much for your detailed answer.

  I got no error message.  I backed up the registry, but was not able to start the pc, so was not able to restore the registry.

  I couldn't restore last good configuration known - the option was not yet present.

  When I tried to restore the operating system, he asked drivers before it would proceed.

  I have a floppy 1.44 with the raid drivers and after reloading of these drivers, I was able to reload Vista Ultimate.  Fortunately, all my data was recorded in a windows.old directory, and I'm back in business without losses.  Just had to reload all my software.  Do that...

  I think that my problem was caused by disabling all startup applications in msconfig - which resulted in my hard not recognized disk array.  This seems likely.

  You are awesome to provide an exceptional response.

• Laptop with Windows XP - windows will not start! __

  KIM when I start my computer, the advanced screen comes up with "run windows normally" run in safe mode, etc.  I tried this, but it does not work.  The windows logo comes with the banner running beneath the logo as it tries to start, but never does.  Any help please?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank:

  My system worked well until ___.

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop of just not being able to go beyond the screen boot options.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure

  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• RUN the object that will not start Windows on-screen keyboard

  I use Lookout 6.5 on Windows 7 Professional. I use a button to fire a sequencer whose output starts a RUN object with a command line of the 'c:\Windows\system32\osk.exe '. Executes the RUN object, but I get a window that says "could not start on-screen keyboard. The window has only 'OK' as an option - click on OK and the window disappears. I tried the same object RUN notepad.exe with wordpad.exe, and they work very well.

  Anyone see what I'm missing?

  Thanks for your reply, Ryan.

  I have now found a solution – but first a few puzzles. I can use the Lookout RUN object successfully to start other executable files in the Windows\system32 folder - but not the osk. I can start the osk in other ways (shortcut, double-clicking the .exe from a .bat file).

  I copied the osk.exe to another folder on the hard drive and can now begin with the Lookout RUN object. I don't know why this works differently - but it does. Thank you.

• Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

  Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '.  A Windows XP Pro with SP3 iso file did not help; not more than another copy of a Windows XP Pro with SP2 CD. What should I do now? How can I systematically enter the Windows installation, and how can I do a repair installation?

  Yaaakov Kayman, retired engineer-programmer/software system (for the most-mainframe)

  http://support.Microsoft.com/kb/311755

  read the above for asms file missing

  ==========

  also please note that you can not do a repair install on xp sp3 with a cd of xp sp2.

  It must be a cd with sp3 slipstreamed CD.

  =====

  If you can get into your bios default and the cd to start everything first and try again, what happens this time?

  In addition, clean the cd by wiping gently from the Center to the edge, NOT in a circle, with a soft cloth wet litely.

  your cd can have a streak that gives you the error.

  =========

  It can also be your player, you have a tower with two drives? If so pass out them and see if the problem occurs.

• I have a toshiba satalite that will not start.

  Tried all F8 options.  In safe mode, it happens to windows\system32\drivers\atisgkaf.sys, then a quick blue screen then back to the screen "we're sorry...". "with my boot options.  What can I do?

  Danner11111,
  This article goes into some details about the error that you are experiencing.  Pass by there and then post back and let us know the result.
  http://support.Microsoft.com/kb/555302

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an acer aspire 10 switch that will not start.

  The screen displays a circle with the word reboot but nothing happens how do you reset it? I tried out but he returned with same message is restarted.

  frankubon wrote:

  The screen displays a circle with the word reboot but nothing happens how do you reset it? I tried out but he returned with same message is restarted.

  When you do a normal click of the sthe power button switch goes to sleep rather than turn them off. Try a press and for ten seconds or more, wait a few seconds and try again to turn on.

• Gateway MD series laptop with Vista once the challenging 'restore point', white screen, will not start, I tried Gateway system and recovery disks, still can not start?

  Gateway MD series laptop Vista OS.

  I tried to install disks system recovery, ordered the bridge.

  The machine do nothing, black screen, no prompt, no way to install the OS, no start upward

  Hello

  did you put the dvd player must be 1st in the boot order

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _______________________________________________________

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://support.gateway.com/us/en/support/default.aspx

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• with a bookmark folder will not delete.

  I have a folder with a bookmark that will not clear.
  Deletes the file or the bmark.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• Satellite A500 will not start

  I have an A500 on 12 months old that will not start.

  The battery light shows white and power on AC light is on as well.
  When button "power on" is pressed and released the laptop IT flashes briefly then the battery lights up orange briefly and the light goes out.

  Battery has been divested of the case and it was completely discharged and it still will not with or without the battery. He has been connected to a different power of toshiba with the same results.

  The difficulty feeding saw two days ago. After that about 10 minutes to load then turned on.

  I saw a post where the guy was acquitted of the internal cmos memory and he ends up - which would have something to do with it?

  Any clues anyone?

  Hello

  I think that it s something wrong with the motherboard or a part of the motherboard.
  The point is this laptop should turns on even if the battery is empty and the power adapter is plugged so maybe it s something wrong with the memory supply or electronic power on the motherboard.

  I recommend you check the parts of memory first. Remove a module and try to start the device using that one module.

  Of course this can not help you too... so in this case, it could be a severe motherboard issue...

• My Tecra S1 will NOT start!

  I have a Toshiba Tecra S1, that will not start. When powered on it gives me a repetitive beep code. The fan starts, only the power light come ON but the screen remains empty.

  The code goes like this: 2 Short emits a beep then one long beep, pause, then 3 short beeps.

  What is the problem with it and what can do?

  Hi Chris

  Of course, there is a hardware problem. Contact service partner in your country. They may include cela beep code. Unfortunately there is no public document on explanation of code.

• Satellite A105-S4164 - will not start only white screen

  Hi all
  I have a laptop Toshiba Satellite A105-S4164 that will not start.

  I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
  All I see is a white screen.

  My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.

  Thank you for your comments.

  Seyed

  You can see an image on an external monitor?

  Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.