I'm taking a vector object, say a flower, compensate for a path, then get a vector path around the outside edge of the offset.  I take my flower, add a line, compensate for this trait, then select Add to Pathfinder, which gives me visually the exact offse

Similar Questions

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• the control panel fixed association, he say of cereate Association for this

  PPS. I can not open emails with attached pps more. He said, to create an association in THE SET ASSOCIATION CONTROL PANEL

  I assume you have the http://support.microsoft.com/kb/126492 PowerPoint or PowerPoint or OpenOffice Suite www.openoffice.crg Viewer or another program to view and/or to open PPS files installed on your system.  If this isn't the case, you must do so before you will be able to view attachments of type pps (use the links above to get the software if necessary).

  To check the file Association, click on start / "default programs / Associate a file or Protocol with a program and do scroll until you come to PPS."  The program is set to open these files the right pair?  Otherwise, click on edit and then select the correct one from the list.  If is not correct in the list, click Browse and look for the programs executable file in your Program Files folder.  It will probably be under Microsoft Office, but where possible folder names vary depending on your version of Microsoft Office and you don't provide that.  I use Office 2007 and it is located in the Office12 folder.  The file name is powerpnt.exe.  Select the file and set it as the new default value and click OK.  You should now be able to view files and attachments PPT.

  If there is no pps file type listed, then open Notepad (start / all programs / accessories / Notepad) and type Test, and then save the file to your desktop.  Then change the name of the file extension .txt in a .pps extension.  Then right-click on the file and select open with.  Choose the PowerPoint program you use (you may need to scroll down again to the actual executable file in Program Files) and when he requested, check the box for always open these files with this program.  Who should the association for pps on the right program and you should be able to open attachments and files without problem.

  If not, what e-mail you program use (name and version)?  This will tell me where you refer for further assistance by experts on this program.  Here is that links to some programs commonly used - post back if you use another thing, or repost your question in the discussion group or Forum adequate messaging to get help.

  If this is normal Windows Mail, post on the Forum of programs at: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads.

  If Windows Live Mail, send to the Windows Live Mail Discussion Group at: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.live.mail.desktop.

  If you use Outlook, post in the focus group in the Office Outlook section at the: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.outlook.general&lang=en&cr=US.

  For any questions about Powerpoint, please report to the powerpoint newsgroup of the Office section at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.powerpoint&lang=en&cr=US where PowerPoint issues specialists will be more than happy to help you with your problem.

  I hope that this hellps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• selection of T-list which gives error "Fied is protected from the update.

  HII all,.
  I managed on the basis of search based charater, for this
  I admit 'user types-in' characters in a text element "vchar.
  
  That the user types into the characters, the t-list (vlist) point is filled with matching characters
  typed by the user.
  
  I test it on a block (jmaster) fields not db...
  
  Once I make the selection of the tlist, I want the 'vchar' field to contain the selected value/label in the
  t-list (vlist).
  
  the problem is when I click on enter and make the selection in the list t
  populated by items, navigate to the next field "tcode.
  "vchar" remains empty and the error... "The Fied is protected against editing" gets displayed on the status bar.
  
  Here are my triggers;

  PRE-FORM  at form-level
  SET_ITEM_PROPERTY('VLIST',DISPLAYED,PROPERTY_FALSE);
  
  WHEN-TIMER-EXPIRED at form-level
  If GET_APPLICATION_PROPERTY(TIMER_NAME) = 'COUNT_TIMER' Then
  
  SET_ITEM_PROPERTY('VLIST',DISPLAYED,PROPERTY_TRUE);
  :GLOBAL.M_SRCH := :VCHAR;
  
  declare
  v_char varchar2(200) := 'select VLIST,VLIST 
                           from JRNY_MASTER 
                           WHERE VLIST like '||'''%'||:GLOBAL.M_SRCH||'%''';
                           
  v_rg_id recordgroup;
  v_err NUMBER:= 0;
  BEGIN
  v_rg_id := create_group_from_query('recgrp1',v_char);
  v_err:= populate_group(v_rg_id);
  
  clear_list('JMASTER.VLIST');
  populate_list('JMASTER.VLIST',v_rg_id);
  DELETE_GROUP(v_rg_id);
  
  END;
  Synchronize; 
  
  End if ; 
  
  WHEN-NEW-ITEM-INSTANCE for field 'vchar'
  DECLARE
    timer_id Timer;
  BEGIN
    :GLOBAL.M_SRCH := :VCHAR;
    SET_ITEM_PROPERTY('VLIST',DISPLAYED,PROPERTY_TRUE);
    SET_ITEM_PROPERTY('VLIST',ENABLED,PROPERTY_TRUE);
    SET_ITEM_PROPERTY('VLIST',UPDATE_ALLOWED,PROPERTY_TRUE);
  
    timer_id := CREATE_TIMER('COUNT_TIMER', 500, REPEAT);
  END; 
  
  POST-TEXT-ITEM for field 'vchar'
  :vchar := :JMASTER.VLIST;
  Delete_Timer('COUNT_TIMER');
  SET_ITEM_PROPERTY('VLIST',DISPLAYED,PROPERTY_FALSE);
  
  WHEN-VALIDATE-ITEM for tlist item 'vlist'
  :vchar := :VLIST;

  Please if some1 have understood my problem, so please answer me
  What was wrong with my logic...
  
  TY

  A few assumptions:
  For the article of VLISt, you must also set INSERT_ALLOWED to true, as this is a new record.
  also for the article of VLIST, you should navigable mouse to false.

• BlackBerry smartphone App Loader me don't say "no new found for this device" or something like that

  I go and around this issue - I know that in addition to the DM, I need to have the OS installed on my laptop. So, I installed, uninstalled, etc., etc., removed the XML for the seller. battery pulls and back to - always get the message - so I bought the software, unpacked to a folder, and the application loader always is not 'see' the files .alx file.

  Any ideas?

  I must own up to not being a really savy with the DM - when I went on the application loader and finally 'scrolled' down to see what was there, the software was there, all I had to do was check the box and it loaded correctly.

  Sometimes, I just pop around way too fast and assume that it does not work.

  Thanks for your help!

  Sue

• I have a Canon mg2100. When I scan the error message says that it cannot find a path to the file

  My Canon mg1200 prints and scans, but suddenly the picture scanned/doc is unable to find a path to any file.  I started having this problem yesterday.

  Hello.

  This error may indicate that the current location of registration has been moved or renamed.

  Go to the settings menu in the IJ Scan Utility.  Once there, you can define a new location for the tabs on the left side of the record menu.  Once this has been done, try scanning the IJ Scan Utility to test the fit.

  It has not responded to your question or problem? Find more help contact us.

• Cannot create the VDC to IAC 3.1 - approval is required for this service...

  Hello

  I am unable to create VDC to IAC 3.1. Log in as administrator cloud, when I click on Create Virtual Datacenter, it says ' approval is necessary for this service and is not enabled. Please contact the administrator '. Under permissions, I also put 'No' in approvals for "Create Virtual Data Center" for

  "Approval of the administrator of cloud provider" and "approval of the administrator of the organization. Clues?

  Thank you

  Mudassir.

  Log on to the portal as full administrator.

  Return to Administration - permissions

  Activate the option "authorization of Service Group.

  Then connect as you were and try again.

  I think what is / was a known problem in the doc.  I thought it was fixed in the latest version so.

• How can I create a vector path around an image border?

  I've attached a screenshot of an image created in Photoshop CS4 with a wacom. It shows a gray line border around the whole image that was created with edit/stroke, and then color and width of the selected outline.

  What I want to do is to put that image in Illustrator CS4 and create a vector boundary road aroun d the image like the stroke limit in Photoshop. But I do not know how thatx except by manually with the pen tool.

  Anyone know if it is possible to create a vector path around the image in the same way that I created the line of race around the image in Photoshop?

  I need the vector path to make a cutting line to a laser cutter, which works with vector files.

  Thanks for any advice on this subject.

  If you already have the path traced in photoshop, go to file-> export-> tracks to Illustrator..., then choose the desired path and export. Open the file in Illustrator, then get the path.

• How do you get photoshop automatically lasso around a well-defined object

  I don't quite understand how to get an automatic lasso around an object in a photo.  I saw other people to do, but don't know how.  (I don't want to draw around the object, myself, I want photoshop to do to make it a perfect lasso around the object.

  Choose The Quick Selection tool and paint around inside the object.  She came forward and the selection of the value to the object.  Note that you can accumulate the selection in several steps, and you can use the ALT key to remove parts of the selection with the same tool.

  

  -Christmas

• I want to get rid of the Bing screen, but there is no "menu at the top of the Firefox window" for me "Select tools and then select the Add-ons menu item.

  I suddenly have a 'Bing' screen when I connect on Firefox - and I want to get rid of it. The support section of Firefox says
  1 "in the menu at the top of the Firefox window, seledt tools, and then select the Add-ons menu item." - but I don't see any 'menu item' tools, or much less modules.
  2. "in the window modules, click the Extensions Panel"- but how to find the Modules window?
  3. find the Bing and extended support to search toolbar in the list and then click on disable for each of them. ' - but what and where exactly is - this?

  At the top of the screen is only an icon of Yahoo to the left and to the right of it, a search box, 'Web search', 'My Apps,' Yellow Pages,""Weather","Updates"and"Skype ". to the right of the people, there is a green cross saying "add more applications. to your toolbar"and to the right of this one kind of gear shift looking icon saying"toolbar settings ".
  So, in short, how can I get rid of the Bing screen and how to access these tools?
  Thank you.

  Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.

  Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
  
  The F10 can also be used on most PCs to temporarily reveal the menu bar.

  https://support.Mozilla.com/en-us/KB/menu+bar+is+missing

• When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  Hi RobertKlaas,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/

• Network controller is not properly understood, impossible to download anything, the diagnostic report saying that there is no driver installed for this device

  Original title:. network controller error?

  the device, network controller, is not understood correctly. report "tv_ConfigMgrErr1". Impossible to download whatever it is or it causes Internet Explore stops working. I get a diagnostic report saying that there is no driver installed for this device. It was working fine yesterday and then around 05:45, my computer made automatic updates and it was after that when I tried to download a game for my grandson and started to get in trouble. I'm no computer expert so I don't have any idea what to do.

  Hello

  1. you are using an internet connection wired or wireless?

  2. What is the exact error message you get when you try to download?

  3. what happens when you try to download the game?

  4. What were the updates that were installed yesterday on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can see the following link.

  Solve the problem of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  You see the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Method 3:

  I suggest you uninstall and reinstall the network card and check. Follow the steps.

  (a) click Start and type devmgmt.msc and press ENTER.

  (b) find the network card and expand it.

  (c) right click on the Uninstall adapter selection.

  (d) restart the computer.

  Windows should install the necessary drivers.

  You can now try to install the latest driver on the manufacturing site.
  Check out the following link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• DEP DEP is triggered when I try to use MSWorks. When I try to disable it for this app it says that it cannot be disabled

  DEP

  DEP is triggered when I try to use MSWorks.  This has just begun.  When I try to disable it for this app it says that it cannot be disabled.  What is going on?

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  Above is a tutorial on how to turn off DEP for a particular program.

  See you soon.

  Mick Murphy - Microsoft partner

• Why the NDP module says "you are not allowed for this operation?"

  Hello world

  I hope you can help me with this problem!

  I'm playing with the NDP module has a message saying 'you are not allowed for this operation.

  This happens when I try to create a new project and try to open the window to select a project type. It also happens when I go to the ADMIN and add new types of projects?

  Is there a role limiting me or does some other underlying problem?

  Thank you in advance.

  Hello

  I think that you might miss an active project type category.

  Go to Admin-> NDP-> categories of project types.

  You must have at least one category that is active (which is indicated by a green check mark).

  Once at least one is activated, you will need to go to the Cache and rinse the taxonomy of cache (just to be sure, I would empty Admin Data Cache Group as well).

  Then you can go to the Admin and configure your project types.

  Let me know if you have any questions,

  Dmitriy

• Invalid object for this request

  Hi friends I have an another problem concerning textframe.

  my java script code is like this,

  firstLine var = xmlElement.lines.firstItem ();

  var newTextFrame = firstLine.textFrames.add ();

  -> newTextFrame.geometricBounds = [0,0,50,50]; error: Invalid object for this request

  newTextFrame.contents = queryNumber;

  newTextFrame.appliedObjectStyle = this.jrnlIDDoc.objectStyles.itemByName (((columnIndex == 0)? (("' AQ_LEFT ': 'AQ_RIGHT'));

  newTextFrame.fit (FitOptions.FRAME_TO_CONTENT);

  If (firstLine.textFrames.length > 0) {}

  newTextFrame.move (null, [0, (newTextFrame.geometricBounds [2] - newTextFrame.geometricBounds [0] + 3) * (firstLine.textFrames.length)]);

  }

  After the execution of this file, I got a error: Invalid object for this request

  
  If anyone knows the soln please help me.

  concerning

  Tahir.
  

  The frame that you add is "inline" and is oversetting image, no doubt, so its geometricBounds are inaccessible. One solution is to create as anchored to instead and then make your changes and then put it back on line if you want to:

  var newTextFrame = firstLine.textFrames.add({anchoredObjectSettings:{anchoredPosition:AnchorPosition.ANCHORED}, geometricBounds:[0, 0, 50, 50]});
  

  Jeff