I'm tring to get my screensaver to work, but he used to start

Similar Questions

• I can't get my screensaver to work

  original title: screen saver

  I can't get my screensaver to work... .He is running and all the setings are correct... can help you please... This is a new acer computer everything els works great.

  Hello

  This problem also occurs if the mouse sensitivity is high and the optical mouse. Just to check unplug it and see if it works later. Post your result. Take care.

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I get my screensaver that worked on windows xp to run on windows 7?

  Original title: How can I get my screensaver that worked on windows xp to run on windows 7 error: the version of this file is not compatible with the Windows version you are using. etc. I know that you saw the message before.

  computer brand new, no change. try to load my programs of hp simple save on my new computer.

  The msg is to tell you what is not compatible

  You can not copy/transfer a program from another PC

• Help get the screensaver to work

  Hey, after 20 minutes of idle time, my screen goes black and displays a message "monitor going to sleep". I would like my computer to stop this and instead my screen to watch out so I can enjoy. Could you please tell me how can I change my settings so that my screensaver lights instead of my monitor to go to sleep. Thank you.

  HP Pavilion Elite m9360f

  Vista Home Premium 64-bit

  8 GB Ram

  Go to Start, Control Panel, and then click Power Options.  In the Power Options menu, you can change the monitor settings to never span of time you want.  Then set your screensaver to "kick-in" before the time that put you in the Power Options settings.

  If it helps, please give me a Kudos!

• Win 7 - impossible to get the screensaver to work

  Windows 7 works very well so far, but I can't make the screen saver turns on with or without putting a time intreval.  Even when I select the option for the login screen to display when the screen saver is cut... usually not work either.

  I set and reset the screen saver mode in the section 'Customize' to prevail, any ideas?

  the information provided, you are using a 64-bit machine x,

  have you downloaded the windows7 x64bit version
  also when you burned the iso file to a disc did you have burning program check you the disk

  as I know that its possible to have defective sectors on the disks.

  so its worth it to take a little extra time and do check Fujitsu Siemens MS-6567V2 2.0 Board by your burning program: clock Bus Micro Star MS-6567V2 2.0: 133 megahertz BIOS: American Megatrends Inc. 07.00 T 06/04/02 2.40 gigahertz Intel Pentium 4 8 kilobyte primary memory secondary memory of the 512 KB of cache cache of 512 megabytes installed memory 1024 megabytes installed a Slot memory ' 0' has 512 MB Slot ' 1' has 256 MB Slot ' 2' has 256 MB Slot '3' is empty Standard VGA graphics [graphics card] generic PnP monitor (15.7 "live, June 2004) NVIDIA nForce (TM) MIDI UART Realtek AC 97 Audio unsupported Standard Game Port PCI CX11252 - 11 Modem IC Soft more IP100A 10/100 Fast Ethernet adapter Dhcp Server: none responded Microsoft 6to4 Adapter Microsoft ISATAP Adapter Microsoft ISATAP Adapter #2 Realtek RTL8139/810 x Family Fast Ethernet NIC courtesy of the GeForce4 http://www.belarc.com/free_download.html MX 440 - SE AGP 8 X Fill Rate: triangles per second: memory bandwidth: Maximum memory: reserve 1.1 billion Texels/s 34

• try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

  After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

  I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

  I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

  Found the drivers on this site:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

  Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

  Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

  I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

  Hello:

  This is exactly what I need.

  First install the Chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

  Then, install the graphics driver;

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

  Then, install the MS UAA HD Audio Bus driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Then, install the HECI driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

  Now for your pesky NIC... It's a NIC from Intel.

  Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

  Paul

• When I try to connect to msn.zone Spades I get internet connection quite working.l I used to paly but not now.

  Why not sign of Spades

  Hi Cooksunday,

  1. what Internet browser do you use?

  2. what operating system is installed on the computer? What is Windows XP/Vista/7?

  If you use Internet Explorer do the following and see if the problem is resolved.

  Step 1

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  Click theStart button, click principally made programs, on Accessories, click System Tools, and then click Internet Explorer (No Add-ons).

  Step 2

  If the problem persists, you will need to try other steps proposed in the article below.

  How to optimize Internet Explorer 
  http://support.Microsoft.com/default.aspx/KB/936213
   
  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ENVY Phoenix 810-160: I can't get the sound to work

  I just got the

  HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I use it with a HP Envy 23 inch monitor which also has audio Beats and a HDMI cable connection.  I went through all the steps on the support page of the monitor and desktop support page.  Any help out there?  Thanks in advance.

  Hello

  No, it's going to work, you can not connect computer Office AiO 23 and get a sound of the AiO 23.

  Kind regards.

• After a clean install of Windows 8, I can't get three monitors to work

  I did a clean install of Windows 8 pro.  I have a Dell T1500 with over-pants V4800 graphics.  This machine previously had Windows 7 installed and works with the ATI driver.  With Windows 7, the three monitors worked without problem.  Now, with Windows 8 installed I can't get two monitors to work.  I use the more updated driver for Windows 8 for the map on the website of AMD.  The third monitor can be seen on the page of the screen resolution, but I cannot "extend desktop...". "the third arch.  When I try to do so it gives me a message saying

  "The display settings could not be saved.  Please try another combination of display settings. »

  All three monitors are the same, Dell P2210.  I tried different resolutions. I tried the driver I was using on Windows 7, I uninstalled the driver and adapter repeatedly.  I installed all the drivers from AMD with the extras (hydravision, etc.).  I used just the default Windows drivers. I have change the placement of the monitors on the video card, but few matter where I plug them in, only two works.  All monitors are operational.  I even tried different monitors.  All this with no result.  I tried to use the Catalyst Control Center.  He sees the third monitor but just shows it as being disabled with no way to enable that I see from in the Catalyst Control Center.

  It is the last obstacle for me to fully use this machine to Windows 8.  I'm puzzled.  I have read many other forums.  I've heard of this problem with Windows 7 as well so I don't know that it's specific to 8 but could very well be.  Yet once I had Windows 7 with three monitors with the same card.  Contribution to this issue would be greatly appreciated.

  I had this problem on a Lenovo three installation of the monitor using the integrated display laptop, a monitor outside the mini HDMI and a third follow out of the HDMI Port among Replicator.

  In the end, it's a simple solution.  When you go to display settings, all three monitors not reimbursed up to 1920 x 1080 and configuration could never be saved - however the 3rd monitor only supported by 1680 x 1050, which is the resolution (recommended).  After changing the 3rd monitor for the resolution recommended, I was able to save the configuration to display > screen without problem resolution.

  I don't know why the resolution not supported has been set default to-after selecting the right pair, there is now no option to go to the highest resolution not supported on this screen.

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• I can't get Google maps to work on Firefox.

  I can't get Google maps to work on Firefox. I have a web site with a Google map on this topic, but potential customers using Firefox will not be able to use this function to locate me. Can someone please help me solve this problem?

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Was working and now get this message: this module requires java to work, but your browser doesn't support java not. How can I fix it?

  I'm trying to access a web application (webmin) and I get the following error message:

  This module requires java to work, but your browser does not support java

  It was working before. Chrome works fine, but I prefer firefox. One of my clients is having the same problem but others using firefox isn't the problem.

  I understand that you are under Linux.

  I had this same problem and fixed it by adding the package icedtea6-plugin on Ubuntu. IcedTea6-plugin is a plugin for web browser to run Java applets.

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!