I'm trying to connect my Canon MG5200 wireless printer to my new HP laptop with Windows 7 Home Premium.

Similar Questions

• I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

  I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

  original title: error code 80070005

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• My Canon MG5200 wireless printer will not respond

  I recently bought a new Canon MG5200 series printer wireless which is supposed to be a really excellent printer with photo printing and a lot of different options, however when I try and print just a normal file (doc) he used to feel. I think it must be something to do with the wireless connection, but I followed all the steps and helps out and he won't answer. On the screen of the printer, it gives only the option to print "PDF Document" which is a problem as well? Thank you.

  Hello
   
  1 have. what troubleshooting measures you tried to solve the problem?
   
  2 have you installed the latest drivers for the printer?
   
  Follow the steps mentioned below and check if that helps.

  Step 1:

  Follow the steps in the article below and check if it helps.

  Solve printer problems

  Step 2:

  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:

  a. Click Start, type "Services" in the search box

   
  b. in Services, right-click on print spooler and then click Properties.
  
  c. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  d. take note of each service, click OK, and then restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.

• Trying to set up a network with windows 7 Home premium

  I'm trying to set up a network on windows 7 Home premium, but could not find this secpol.msc. I read the posts on the guy with vista home premium and similar problems. I tried the advice given to him:

  Open regedit and locate the key:
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contrl\Lsa\LmCompatibilityLevel

  Set this value to 1 (is default on 3) "send LM and NTLM".
  See the Q823659 knowledge base 
  

  I got in the case of the LSA and found no LmCompatibiltyLevel, he was not in the file or it contained a folder with that name.

  I also read a post from someone about windows 7 as follows:

  On Windows 7 Home Premium, secpol.msc or this registry key is set.

  However if you add a new key named LmCompatibilityLevel DWORD value at the specified location and the value of '1' it seems to work to allow
  "Use NTLMv2 session security if negotiated".

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\LmCompatibilityLevel

  But my problem I do not know what he meant by 'DWORD '.

  If someone could help with this problem, it would be great.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Connect to the Internet, a host group and e-mail.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• If I update to IE10 with Windows 7 Home Premium I will solve the problem of my Canon iP1300!

  Dear community Microsoft Support:

  I am a volunteer physician for 35 years and my computer is an asset to my work, I install each critical update Microsoft on every second Tuesday of the month.

  I upgraded to IE 8 and IE 9 and my Canon iP1300 will not print something on a webpage only from Microsoft word.  (I get "Enternal Error) when I try to print.  I reinstalled my printer, and all my drivers related to my printer and Windows 7 platform are up-to-date.  I have excessive security, but they are compatible and cause no conflict.  (I have never had any viruses, worms, malware, script errors, spyware or adware back to Windows 95 as I have used all of the platforms that Microsoft has put in).

  Please can you tell me if I install, IE10 on IE9 on Windows 7 Home Premium will I still have my "Favorites" or do I export them before upgrading.  (I'm more work, and to be honest I don't remember if my favorites will be retained when you install a more recent version).

  Please, if you know, what are the advantages and disadvantages of IE10 on Windows 7 Home Premium.  When I had IE8 I have never had a problem printing with Canon PIXMA, Ip1300 until I installed IE9. ,

  Microsoft unsuccessfully to solve the problem of printing page Web IE 9 is already installed, but does not solve the problem.

  Thank you very much in advance for your support.

  Best regards

  Dr. Hubert Hechabarria

  Thanks for the good wishes! The same thing for you and yours!

  Now, to answer your question. First a point for clarity. Hotmail is transitioning to Outlook.com (this is important because the Outlook application is provided with Microsoft Office). Yes, Outlook.com has a spell checker and Yes everyone will have to change to Outlook.com Hotmail.com

  Don't forget that IE10 is only a browser and that the Hotmail/Outlook.com is just a web-based e-mail accounts. For example, when I checked my email Outlook.com I used Firefox to access. I usually use Outlook (part of Office) to access my email accounts based on the web that I much prefer the feature he gives.

  Way to go with languages! I can barely keep up with English! * smile *.

• I'm trying to connect my Acer X 1160 projector to my new HP laptop without success. Any suggestions

  I, ve recently bought a HP Pavilion laptop g6 running Windows 7.

  I tried to connect my Acer X 1160 projector for some time now without success.

  I find the projector in my devices, I downloaded records, etc., but no response.

  The message of the projector is "no signal".

  I, ve tried the obvious 'connect to a projector' without success.

  I would be grateful of any advice.

  Hi Varvee,

  Contact HP Support for help from here: http://www8.hp.com/us/en/support-drivers.html and be more specific on your laptop or maybe you can try http://www8.hp.com/us/en/contact-hp/phone-assist.html of the hotline, if he bought fairly recent.

  Good luck!

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Samsung laptop computer with Windows 7 Home Premium. Scrolling touchpad stopped working with Firefox (but still works with Internet Explorer). I tried to 'restore' to several previous dates, but still does not work. Any ideas?

  Do not use this laptop very often. I had done several updates at once (including the Windows updates and the latest edition of Firefox).

  Check if there is a PDF file open in another tab. My Samsung R580 scrolls the PDF (which was open on another tab) instead of the tab that is currently open.

• Unable to connect on WIndows (Windows 7 Home Premium 64-bit)

  I have HP desk top (bought 3 years ago) with Windows 7 Home Premium.  Today, after the regular windows updates, my PC has rebooted and showed me to the login to the accounts screen 2 user (both are protected by Word).

  When I clicked on any of these accounts, he was asked to enter the password and tried to connect.  But he couldn't and showed me back to 2 accounts login screen user.

  I rebooted my system several times, but the situation is the same.

  Please help me solve this.

  Thank you best regards &,.

  Ludovic pokora

  Hi Ludovic,.

  Thanks for posting your query in Microsoft Community.

  We apologize for the inconvenience caused due to updates.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2: If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 3: If after performing the above steps, you are able to start the computer and access the desktop then try to Uninstall KB3097877 update if it is installed, and then reinstall it.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• Im trying to connect my canon mx320 to an old dell latitude d800

  ORIGINAL TITLE: im trying to connect my canon mx320 an old Dell Latitude d800 but don't have the finances to pay someone to synchronize the tw devices is there a way I can just do myself

  I MISS PLACED MY PRINTER BOOT DRIVE

  You can download the manual instructions and specific to your system driver (vista 32 or 64 bit) from the following link:

  PIXMA MX320
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx320#BrochuresAndManuals

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx320#DriversAndSoftware

• Error code 80070005 when trying to update Windows using Windows 7 Home Premium

  I am running Windows 7 Home Premium, upgrade from Vista on a Sony Vaio VGN-FW350D. The upgrade was promotional as part of the purchase of the laptop in the Canada.

  I had no other pressing issues which have not been resolved. IHAVE run the built-in Windows based Registry Cleaner (like a cleaner 'free') and the dreagmenter of disk as part of the troubleshooting process.

  I have tried everything I can find on the setting of the following problem:

  When trying to update Windows (ie. Download updates of security or Microsoft security patches, etc.), the following is displayed: "Windows could not search for new updates - an error occurred when searching for new updates for your...» Code 80070005. It gives you the 'Try Again' button, but who does not work either.

  Also, after running in a Fixit 'Microsoft' by default and aggressive modes, change my registration to God knows what state by applying other methods proposed CIHI, now when I try an update of Windows, the "last check for updates '"and updates have been installed"the both indicate '' never. '' BTW, I have the restore points before you make these changes, so no worries there.

  I would like to point out that, as far as I know, this problem has persisted since January 1, 2011, when I downloaded and installed Microsoft Security Essentials, which would not update or another. Before installing MS Security Essentials, I ran Avast, I have re-installed after removing Ms Sec Ess.

  In short, Windows update does not work, giving Code 80070005. Can anyone help solve this problem with me? Thank you...

  Ralph

  Hello

  Error code 80070005 means generally that you're not quite allowed to install updates.

  If the problem persists, follow the steps mentioned below and the Coachman.

  Step 1:

  All first please confirm that you have logged on to an account with administrative privileges.

  To connect to the administrator account

  a. Click Start, right click on computer, then click on manage.

  b. expand local users and groups, and then click the users folder.

  c. right-click on the connection of the administrator, and then click Properties, and then remove that checking the account is disabled.

  Now, restart the computer and log on to the administrator account and try to update again.

  Step 2:

  You could disable your anti-virue and malware/spyware protection temporarily to see if they are contradictory with the update.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3:

  Uninstall Security avast software, install the update day, then reinstall Avast.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have a laptop with Windows XP that show an icon connected to the internet, but I can't access the internet.

  Hello

  I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.
  Thank you
  original title: wireless internet

  Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...