I'm trying to get the updates of windows - permission denied

Similar Questions

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• I'm trying to get the update, but I keep seeing error 46?

  I'm trying to get the update to CC but keep see error 46?

  Hello

  Please see

  Cannot install Creative cloud installation - error code 46

  Hope this helps!

• where can I get the update from windows to windows xp professional sp3 - error loading C:/Windows/oranbd.dll

  Windows Update is not installed, when I turn compurer I get error loading error messages c:/windows/oranbd.dll and said ca can not be found

  also is runing very slow what can I do to fix

  Hi hugozamora,

  ·         Do you receive the exact error message?

  ·         When exactly do you receive the error? Is the Windows startup?

  ·         Do you receive the updates of Windows-related messages?

  Method 1: You can visit the following Web site to install the latest Windows updates for your computer.

  Microsoft Windows Update

  Method 2: Start the computer in safe mode and see if you receive the error message you mentioned. Report of the results.

  See also:

  Increase the speed of the PC: optimize your computer, help your PC run faster

  Respond with more information so that we can help you best.

• Can not get the updates of Windows because Windows Installer errors

  the Windows Installer will not let me get the updates of any where and I can't remove programs, says error messages I'm either in courses running in mode without failure or windows installer has not been installed correctly. I'm not in safe mode, I can not down load or remove programs or updates

  Hi pocono500,

  Follow the steps listed in the link below: error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible":http://support.microsoft.com/kb/315346

  Link for reference: how to solve the problems that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 800F081F while trying to install the update to windows security

  I have to install updates in order to renew my soft security on my laptop but whenever I try to install the updates to windows, I get an error code. It's 800F081F and I can't understand what this means or what I need to do to correct the problem. If anyone can help me, I would really appreciate it!

  Thank you!

  source CBS_E_SOURCE_MISSING 0x800f081F for unsuccessful package or file not found, ResolveSource()

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821>

  If the system update tool does not resolve the problem, you will need repair Windows.

  UTC/GMT is 15:34 Wednesday, June 13, 2012

• 641 error when trying to install the updates of windows on a PC running Windows Vista Edition Home Premium

  Original title: Uninstalling fiz 641, error code

  Impossible to update windows Vista premium 64-bit edition I get error 641

  Hello

  ·         Update is causing the problem?

  ·         What is the full error message?

  ·         You are able to install some other updates?

  It seems that there is a problem with the update of Windows. Click on the link below.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

• When getting the updates for Windows 7, Windows 10 is always as it wants to download - it's August 1st

  I reserved a copy of win 10 last year, then changed his mind. After many hours of searching for the KB, I managed to get all the updates removed that prompted 10 of Windows to download and install (or so I thought). Now, it's August 1, 2016, and I want to get the value of a year of updates for Windows 7. When I check the updates for Windows 7, I want to install, I get the message that the download of Windows 10. Is this REALLY the download? I stop downloading and closed.

  Can someone please help me to get the updates, I need for Windows 7 without Windows 10 showing its ugly head?

  Hi AnnGilliland,

  Thanks for posting in the Microsoft Community.

  To avoid Windows 10 update on your Windows 7 computer, you can reset your component to update Windows 10. Please refer to this link: How to reset the Windows Update components.

  Please mark as answer, if this post responds to your request. Do not hesitate to contact us if you need future assistance.

  Kind regards

  Gilles Ova

• Difficulty getting the updates of Windows in April, fixed - now in trouble again with the month of may

  I, like so many others, have problems with updates of Windows, as well as to download and install. My problems on my computer Windows 7 began in April 2016 during the "patch Tuesday". After having done everything I could think of, including communicate with Microsoft (which were absolutely no help!), I found a fix here - installation KB3145739. Since then, I was able to check the updates without problem - that is to say, until the most recent "patch Tuesday," which was this week may 10.

  I had set my computer to "check for updates, but let me decide whether to download and install." Well, the computer doesn't seem to be looking up everything on Tuesday at all, so I checked manually for them, and as last month, the search seems to never end. After looking at some of the posts here, want to ask questions on exactly what to do. First, should I reinstall KB3145739? Also should I install or the other of the following - KB3153199 or KB3138612 - in addition to KB3145739 (fell on these two elsewhere on here as possible fixes)? Finally, should I change my settings to "never check updates" rather than as I have currently and always just manually check updates? Thanks for any help on this. I am so tired of MS causing problems with getting the updates (never had any problems until they start us pushing the 10).

  (Just thought of another question - GWX control panel installation would be a good idea?)

  Your most reliable way to identify the update is to check this page:

  http://Wu.krelay.de/en/

  Other than that, start with Kernel Mode driver updates. ;)

  Best regards, VZ

• After you have reinstalled XP, trying to make the updates of Windows, getting error number: 0x8024400A

  I reinstalled xp system and have tried to make windows upated but I get the error number: 0x8024400A I tried to do what others say to do but Thies is not working I can't do fixit or me sat

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• I'm getting error 646 when trying to get an update for windows vista (KB973917). I could manually download other updates, but I can't find it. Help!

  I get the error 646 when trying to update for windows vista (KB973917). I was able to update manually when I got this error but I can't find where to download this update.

  KB973917 (who is NOT a security update although it is security related) is only available through Windows Update.

  Chances are protections in real-time to your antivirus or internet security suite (for example, Norton 360;) Norton Internet Security; etc.) is involved here. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error number: 0 x 80070002 - tries to install the update to windows

  Try installing the new version of windows updaae on the microsoft.com Web site and I get the error message below

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. What can I do to fix this?

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

• error 80070490 trying to do the update of windows Vista. How to solve

  I'm urged repeatedly to allow an update of windows.  I'm sure that I need, but it is no help ANYWHERE on the web for 80070490 'unknown error' this error prevents any update and is a problem.

  There are dozens of other error codes answers, but none that apply to this error.  I'm just the update proposed by windows on a laptop with Vista that has no other significant attachment problems.

  There must be an error code and "how to fix" somewhere.  At least, it seems to reduce the demand for technical assistance from IS.

  Thank you

  puzzled in minutes

  There is actually a Windows Essentials (Live) 2012, my friend, but it is not supported on a Vista computer.

  I'm just trying to get this functional pc...

  1. who, if any, of these updates ARE LISTED in updates installed (No history of update)? [1]

  (a) KB2817183, KB2813170 & KB2808735 and KB2840149
  (b) KB2807986; KB2797052, KB2780091, KB2789646 & KB2790655
  (c) KB2758857; KB2727528 & KB2685939:
  (d) KB2644615, KB2393802 and especially KB971029.

  2. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ===========================================================
  [1] the list of updates does NOT include UPDATES, released on May 14, 2013.

• I can't get the updates of windows in Windows 7

  Original title: 123ash

  Hi, I installed Win 7.1 Professional 64-bit on my Gateway laptop. It has been authenticated

  Everything works except that I can't get windows updates. When I try to download the green lights in the bar and just continues to run. I got it on for hours. I checked to make sure that the update services are on and set to manual startup. BITS is running as well. The update of the victory is not blocked by the firewall.

  I don't have a single update to date. Explore Internet settings have been changed by default.

  Any help would be appreciated.

  Hi, sorry for the late reply.

  I made sure that the BIT has been started.

  I have disabled the Windows Firewall (as I have a Bullguard internet security firewall as well).

  Then I tried the udater and it worked! Thanks for the advice above.

• Vista: Error 800700c 1 trying to apply the update for Windows (KB2416400)

  As the title suggests.

  The system is trying to update, but it fails.

  This is a security update so I thought it would be important, but can not find a single article about this problem.

  I tried the email support option, and it was unnecessary

  Someone at - it solutions?

  I solved the problem on my own and... surprise!  once more he had nothing to do with a virus.

  You're far, far, far, far from quick access to call virus without having any evidence to support the claim

  Microsoft also has a huge problem of not providing enough logging to help a user to determine the cause of a failed update.  It doesn't help anyone.

  What I have is as follows and hope that helps someone else.  I don't know what point fixed, but the patch has finally been installed

  Connected as an administrator, I did the following:

  -updated to the latest java

  -updated the last flash and shockwave

  -emptied the cache for IE and purge the temporary folders

  -deleted the cache used by windows update

  -removed all is not plug-ins associated adobe (I have some that I need for school)

  -a ran a disk check

  -conducted a scan of CWS to ensure that no problem

  -turned off the startup applications all

  -restarted

  -Ran update as an administrator.

  Miracle or miracles, the installation of the update worked – shocking once, that nothing related to the virus.

  I think that this virus card is played far too often

  Which of these actually didn't solved the problem - no idea.  But it was much better than what is suggested in the recommended response.

  Its this kind of pain that makes people so mad at Microsoft.