I'm trying to XP Pro SP2 disk to clean some detected 'unknown '. I noticed there was a burning shed, where usually there was a CD icon?

Similar Questions

• Product key not recognized during a repair of xp pro sp2 on a genuine xp pro sp2 disk. stuck on the main screen of the product.

  After starting problems on my Toshiba satellite with xp pro sp2, I booted my xp pro sp2 disk and did a repair instead of a reinstall software.  He went through the motions, removed the sys files, copied them back and so on.  Then he asked my product key and I typed in it and it does not recognize.  It's a real bought copy of xp pro sp2.  Now, I'm stuck on the main screen of the product.  When I start the laptop on the xp disk it blue screens, the only option I have is to enter a product key in the configuration...  I have my receipt for my xp pro disk and product key for certification sticker.  Help, please!

  "XP MCE Pro? That is not normal! It would be one or the other (AFAIK). Here is an example:

  http://cdn2.ioffer.com/IMG/item/811/353/46/o_XyuQav94U1MQ0Ci.jpg

  If the hybrid you mention is the real thing, it's new to me! I know that some have described as a superset of Pro MCE, but I never used this version, so I can't tell you definitively that a COA sticker wouldn't this combo of terms...

  In addition, the term 'Enterprise Edition' implies something not legitimate. I do not think that Microsoft has never used the term marketing for Windows.

  If you had a legitimate retail version of Windows XP (any version) that is not used on another PC, you can perform a Clean Install (not a repair installation), using this key (not the key COST laptop). The only way you can use the key from your laptop COST would be if you used the correct installation CD - a generic OEM version of the corresponding XP (MCE?) version. In this way, you can perform a clean installation or a repair installation.

  Have you looked at the links I posted? What do you mean by "boot option? The instructions were to press the zero key while turning on the laptop. You are not supposed to enter the OS! The recovery partition is quite distinct.

  If your laptop does not a recovery partition, you should be able to get the correct recovery CD for this Toshiba - by Toshiba or you might need to find a reputable eBay merchant, etc.. Restoredisks.com, who has a good rating from Better Business Bureau, they probably sold too.

• How can I use my valid product key XP Pro SP2 with my drive OEM XP Pro SP3 and still meet the requirements of Microsoft Genuine?

  I had to wipe my hard drive due to a battle lost by a virus. My installation of XP Pro SP2 disk disappeared, so I used my XP Pro SP3 OEM disc to install Windows. When I used my valid product key XP Pro SP2 I was shocked to receive an invalid product key. I always ran Microsoft Genuine product and would like to know how to reach a genine advantage accreditation with my present prediciment. Any help would be appreciated and we thank you in advance.

  Hi KevinDitner,
   
  I'm afraid, but you can't do that. Your product key Original Equipment Manufacturer (OEM) should be used only for the laptop which came with it.
   
  You can get the CD of Windows XP Professional Service Pack 2 (SP2) by contacting the Support team customer Microsoft.
   
  More information on:
   

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• copy on the disk "macintosh hd" failed. an unknown error occurred (-4)

  When I try to sync my iPad air 2 to my mac pro book I get the following message:-trying to copy on the disk "macintosh hd" failed. an unknown error occurred (-4).

  Would appreciate if someone could help it.

  I have this problem too!

• I am trying to load XP Pro SP2 as the key on the bottom of the system says xp pro. But during installation it says the key is invalid? How can I fix?

  Invalid product key?

  I have an old laptop that I am donating to a charity.  I try to load XP Pro SP2 above, because the key on the bottom says xp pro.  But during installation it says the key is invalid?  How can I fix?

  It is possible that you will need to a disk with SP3 slipstreamed in there - much SP3 keys are a new slice that has been issued and is not recognized by the previous discs.

  Your machone specifies a level of SP? What is the brand / the exact model?

• I am trying to install Windows XP SP3 on a system with XP Pro SP2 volume license.

  original title: I am trying to install sp3 on a xp pro sp2 license volume

  as said, trying to update offline a retro gaming machine which is a xp pro sp2 (play volume license) with the standalone SP3 but it keeps throwing cannot install, kernel windows me.

  thing is so far all the machine has on it is XP pro 32 SP2, adobe reader, firewall (disabled for the installation of sp3) software, avast (yet once disabled during the installation), the drivers ATi and catalyst (disabled at startup for installation) and .net 3.5 (necessary for the completed sale final catalyst 8.8).

  any ideas what's happening people? and all work around solution or method will get SP3 to realize that the copy of windows is legitimate?

  If it helps, it's a machine for windows update offline and the tool of the GAV aren't on that

  OK, cheers for the help.

  has caught ISO sp3 rather old stand-alone setup I had; and for some reason any has no exe work again even in safe mode but the iso.
  My advice to anyone with a similar problem is grab ISO sp3 and use instead.m
  Please mark the thread as answered.

• Installation of XP pro sp2 stalls to the file teamw.exe then ks.exe and many others.

  I'm trying to re - install XP pro SP2 after a virus attack.  I did a full format on my WD 160 GB hard drive.  Serial ATA Mothboard Biostar G31 - M7 TE with the most recent BIOS.  Generally, installation hangs when you attempt to load the file "teamw.exe" the file depending on whether he's looking for is ks.exe there are twenty others subsequently that it cannot find.  I tried another disc with SP2.  The same problem.  I joined my current version to SP3 with the same result.  Thought it might be a hard drive problem.  A ran the WD disk checker rescuer in the BACK.  No problems found.  I don't think that is the motherboard related.  Would be - this somehow a hard drive problem?  No other equipment still installed.  It drives me crazy.  Thanks for your suggestions!

  Hi Indiana brand,

  Whenever there is a problem with the Windows XP disc, we encounter this type of questions. We recommend trying the following steps and check the result.
  a. installation to launch Windows XP.
  b. when the file fails to copy, remove the disk from the CD drive and insert the other XP CD in the drive to see if the copy process continues successfully.
  c. If the installation continues, complete the installation.

  See How to install or upgrade to Windows XP

  If all else fails, contact the manufacturer of the system for more support options.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Load the new XP Pro SP2 OS on Portege R200

  I have a R200, bought in Russia (where I work). I want to install an English version of XP Pro SP2.

  I intend to reformat and install from scratch. Then load all the utilities of Tosh from a CD, I created.

  Loading the XP CD and restart then the installation of Win XP Pro does not recognize Toshiba PCMCIA DVD Rom CD - RW I plugged.

  So I created the 6 boot disks for SP2 on the site of Ms.

  I start from the startup disk, all goes well but until I get to disk 6. Next, I get the windows error blue screen exception etc.

  Beyond that, I can't get to format the drive for a new installation.

  When start I have now the option for the Win XP Pro and WIn XP Russian, although the latter is going into the installation routine that cannot see a CD drive Yes F3 and restart.

  Any ideas?

  As far as I know that you need a support disk Toshiba (PCMCIA card 16-bit cardbus)
  I found an info that the readers should work:
  PA3402E-1DV2
  -PA3352E - 1 CD 2

  To my knowledge, you must press button P and it should be possible to start PCMCIA player. To boot from the disk, you must use the C key.

  Please check these messages:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6749&MessageID=23319

  In this announcement, you will find the compatible players to begin the process:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9291&MessageID=32612

  Please use the wonderful advanced search of this forum.
  Here you can search for similar comments that should help you.

• Windows XP Pro SP2 re - install does not accept the product key.

  I'm trying to re - use the product key on the sticker from the bottom of the laptop.  This is the same computer that was working fine until I decided to reinstall, but I use a different installation media because the laptop (a refurb) never came with the media.  Can I call MS and get it re-authorized?  I have XP Pro SP2 and XP Pro SP3 Reacondicionador media.

  You try to install Windows XP with OEM product key you have on your COA sticker. So be sure that you have a generic Windows XP OEM CD, because VLK or Retail CD does not accept the OEM product key.

• V.2002 of MS Windows XP Pro SP2 OEM from Newegg in 2006 would not agree on shrinkwrap product key during installation

  I bought v.2002 of MS Windows XP Pro SP2 OEM from Newegg in 2006.  She would never accept the product key during the installation on his blister.  To complete the installation, I used a different key of a second OEM disk, and it worked.  It's been a while since I installed XP; but I was working on this computer lately and realized I never knew why the CD has had this problem or how to fix it.  I have 3 questions.  #1: the key on the blister does not match the key in "unattended installation. TXT "; is this normal?  #2: the key in "unattended installation. TXT doesn't work anymore.  #3.   Any ideas on this subject?  Thank you, Jeff.

  The only thing I can think is that you were consistantly entered a bad key - it's almost unknown fo that there is to be a wrong key on the label and it is much more likely to be a case of misreading of the key, which is not easily read in the best of light (which is why I often use a torch and a magnifying glass).

  I guess it's vaguely possible that this is a substituted forgery (some thieves employee pirateshave shoplifter and employees take to counterfeit and bring out the true copies).

  I'm surprised that the other has worked, if it had already been installed on another PC - they are locked for the life of the first motherboard on which they are enabled.

  The key in the file 'unattend.txt' is a dummy - it cannot be enabled and is not normally get used except in the OPK.

• Is there a download bootable XP pro sp2

  can I download a bootable xp pro sp2 to replace my damaged? I have the product key which is saved for me andf my computer and CDs were damaged in a move.

  Hi dstek,

  To create a Windows XP boot disk refer: how to create a boot disk for an NTFS or FAT partition in Windows XP: http://support.microsoft.com/kb/305595

  However, has completed the cycle of life for Support of Windows XP and Microsoft is no more shipping Windows XP CD.

  You can check: http://windows.microsoft.com/en-us/windows/products/lifecycle

  With regard to:

  Samhrutha G S - Microsoft technical support.

• have no serial-key when I bought windows xp pro sp2

  Hello I bought a computer from http://www.dustin.se/ 2008, and I have windows xp pro sp2 with her but never used until now and then I came across a problem, there is no serial-key with her and I talked with microsoft, but it was a kind of license that said Hp had the serial key so here I ask you if you can give me a , I still have the receipt and package so I have no problem you give me a...

  ... but maybe it is?

  Sorry, but this is a forum for peer-to-peer for HP users help other users of HP. HP does not maintain an official presence in these forums and, therefore, it is unlikely that you get an official response from the HP company.

  Please provide the full model number and/or the product number of your HP computer so that we can help you find the recovery disk that may fix your problem.

  Frank

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• DC7800 SFF XP Pro SP2 - SP3 upgrade?

  Hi all. I recently rebuilt several "wiped" DC7800 SFF computers using restore disks. They are now running Win XP Pro SP2. Should I update to SP3 and if so, can I use the standard Microsoft SP3 download or is there a specific HP? Thank you.

  I just did a recovery on a company dc7800 PC yesterday at a customer site. I recommend that you leave to SP2. There are a few security updates Microsoft Update will recommend that you apply if you do not apply SP3. Apply the security updates. The reason why I made this recommendation is to avoid drivers and BIOS problems.

  There is no specific Microsoft Windows SP3 Pro update for the dc7800 provided by HP.

• How do I backup my Mac Book Pro using disk Seagate Slim Portable for MAC?

  How do I backup my Mac Book Pro using disk Seagate Slim Portable for MAC?

  You can use Apple Time machine app

  Use Time Machine to back up or restore your Mac - Apple Support