I'm updating my punkbuster files...

Similar Questions

• Download timer estimate not updated until the file is made of 7/8, size of the file not considered and corrupt downloads!

  Sometimes when I download a file of the estimator download will not update until that file is downloaded about and made. It didn't happen in the previous versions, I think somewhere around v15? or whenever the new download manager has been implemented.

  Another problem is that the size of the file is unknown until mainly downloaded.
  (a.k.a. "calculation of the remaining time - x MB 103 MB (132 KB/s)")
  didn't matter what Internet connection I use, can not repeat on a local network download.
  Sometimes, I don't get on the servers really really really really really fast.

  Oh, and don't forget corrupt downloads!
  file will download as usual, but smaller than the total size who said that the Web site or the list dialog confirmation boxing. Download complete report manager!
  Ending up with a zip file or other file that will not open or run.

  No antivirus software, I run clean, safe and vigilant.

  I managed to get photos, take a look.
  https://www.dropbox.com/sh/gu2yiffrazxpasc/xVaAEH4Kod

  I use an extension to go back the look, feel and function of the old Download Manager, but it still isn't correct in new download manager.

  but as has been said elsewhere, I'm probably going to create a new profile so I hope that this will disappear when I finally get around to that?

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Automatically update the sequence files (any)

  We have a very large number of sequence files that must be updated.  The "Types" have changed.

  Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

  What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

  Is there a faster way?  (I expect to archive them out of Version control.)

  Mike

  Take a look at the converter file sequence located in tools > sequence of update files

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• windows backup simply updates existing stored files with anything new?

  Original title:

  Windows backup

  I made my first backup of Windows 7 using an external hard drive. It took about 4 hours and it has used about 131 GB.  I put the computer to do it automatically every week on Sunday but I'm not sure what I have to do - probably just connect the external hard drive? However the back-up simply to update the existing files with something new? Also then see what was on the disk I couldn't see where my Live Mail is stored?

  Your direct mail is stored on your e-mail server.  If your computer burns in a fire, your emails are still on the mail server of Live ready to use and download any email client.  However, if you want to save locally stored e-mail (that maybe not all), it depends on what mail program you use.  As Windows 7 has no built-in e-mail program, let me first ask what e-mail program you use.

  Anyway, to answer your question of backup: Yes, only files that are new or changed since the last backup copied again.  If there is already an up-to-date copy because nothing has changed, he has not a just double, because who would waste space when backing up.

• Update the text file app/native/assets/data/in the workspace?

  I'm having a problem with updting a compressed file that is updated via a Web service.

  It is pretty simple what I'm doing. first wait for the answer

  QNetworkReply * response = qobject_cast(sender());

  check the data, etc.

  location of the file is "app/native/assets/data/somefilename.txt".

  QFile file (type);
  If (file.exists ()) {}

  leader. Open(QIODevice::WriteOnly |) QIODevice::Text);
  QTextStream out (&file);)
  off<>

  leader. Close();

  }

  It works fine on my local machine when I run it on my Z30 by momentics.

  But once I have add to my BES server and pull down on my workspace, the file is not updated. I can see the file updated in the application is correct the only thing is that the file not updated text.  From what I see the "app/native/assets/data / ' is read-only.

  My question is how update you text files that were packaged in the instalation of the app "app/native/assets/data / '?

  Thanks in advance

  It is not possible, assets / is read only when the application is deployed to the device, it is only readwrite on Simulator. data / folder can be used instead.

  Optionally, the file may initially active resident / and can be manually copied to data / on the first start of the application. After that it can be updated in the data / folder.

• Is it safe to delete update windows7 backup files?

  Is it safe to delete update windows7 backup files?

  It is safe to delete the temporary files, offline files, etc...

  Click on each list in the Windows Disk Cleanup for a description of the files, and then determine whether or not you want to remove them.

  With respect to the update of Windows, you can delete the contents of the Software Distribution folder

  1. Click Start, click run, type services.msc and click OK.

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

  2. In the Services (Local) pane, click automatic updates, and then click stop.
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the: \Windows\SoftwareDistribution folder. This place is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates, and then click Start.
  7. Restart the computer, and then run Windows Update again.

• After the last update of Windows8 file windows Explorer open but do not appear on the screen

  I already searched the net for this question, but none of the above applies to my problem.

  When I start the file Explorer in the bar of tasks or by other means, the file Explorer window starts minimized (not shown on the screen).  I checked in the file Explorer properties/shortcut/Run and I tried both normal and maximized window and file Explorer opens however Minimized windows.

  The problem is that none of these small icons will maximize (appear).

  My question is what update broke the file Explorer?

  Hello

  Thanks for the reply.

  Please refer to the suggestions of WebSmitheryUK responded on 4 January 2013 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/Windows-8-file-Explorer-does-not-open-from-taskbar/6462c7db-b2bf-4016-ac7e-96d2ac110f16

  I hope this information helps.

  Thank you

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  There is no such command in Acrobat JS. Maybe it's the name of an item in menu or function, that someone wrote.

• 6 Lightroom doesn't recognize external metadata updates to JPG files

  I have a lot of JPG and RAW files in Lightroom 6. I recently started using 10 Photos On1 with Lightroom. The On1 browse application allows you to add/edit metadata such as ratings. And it's supposed to be faster for this task than Lightroom. So, I went back to rate photos in folders that had previously no side. Back in Lightroom, I synced the metadata from other applications. It worked for my photos in RAW. They all sides I have setin On1 Browse. But Lightroom did not recognize external updates to JPG files. Is this a bug in Lightroom? I find that this also discussed anywhere. Help, please.

  A couple of things to check.

  By default, I think that OnOne wrote NO metadata for an original, but a copy. The settings are in the prefs. So if you rate it's going, I think, write immediately to a sidecar XMP for a RAW, Lr see and import if requested.

  But JPEG files is not sidecars, and it will not write in the original JPEG, so there is no new metadata for Lr to read. You can force the metadata that you entered in OnOne in JPEG, IIRC, with an 'Embed metadata' command. Try this.

• Need help updated the VMX file on several Virtual Machine

  All,

  Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

  Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

  However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

  Here's the line I need added:

  Devices.hotplug = "false".

  Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

  Get-viserver - < Server > - < user > - < password >

  $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
  $viview | {foreach-object
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
  $vmConfigSpec.Tools.afterPowerOn = 'True '.
  $vmConfigSpec.Tools.afterResume = 'True '.
  $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
  $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
  $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
  $_. ReconfigVM ($vmConfigSpec)
  }

  The exact script can be found in Disable HotPlug

• Deleted data file update the control file?

  Hello!
  
  I deleted a file from data in a tablespace. It was done on purpose because I have no more need. Unfortunately
  I have not updated the database control file, now I get an error message:
  
  ORA-01157: impossible to identify or to lock the 202 data file - see DBWR trace file
  ORA-01110: data file 202: "D:\ORACLE\PRODUCT\10.2.0\ORADATA\MINOTAUR\TMP_01.DBF."
  
  How update the control file to get rid of this error?
  
  I use Windows and exit DB 10.2.0.2.
  
  Thank you very much for your help!
  
  Christian

  I think that I made a mistake of reading here.
  Looks like you have deleted a TMP file.

  You then have to join v$ tablespace with v$ tempfile in the statement.

  It's a 10 G (or higher) database?

  Try to drop the tablespace that belongs to this data file, otherwise recreate the controlfile (needs database is offline)

  HTH
  FJFranken

• Automatic updating of project files

  Is it possible to automatically refresh the file in ColdFusion Builder?

  for example, I perform a SVN update in the CFBuilder and files have changed.  If I do an "extended search" in my code, CFBuilder throws errors saying that the files are not synchronized (or something like that) and need to be refreshed.  If I right click-> update on the project, all the files is updated and I don't get the error.  If I update, I apparently to get the latest updates of my files and reflect like that throughout the project (without having to remember to refresh it every time).

  Someone knows how to do it automatically after a SVN Update?

  For the moment, no.

  But voting to do this, perhaps:

  http://cfbugs.Adobe.com/bugreport/flexbugui/cfbugtracker/main.html#bugId=82909

  --

  Adam