I moved main style sheet to the folder where are all my other stlye sheets

Similar Questions

• Error: failed to create or save new files in the folder where it was downloaded during the upgrade from Windows Vista to Windows 7

  Original title:

  Attempt to upgrade Windows Vista to Windows 7

  I try to update my Windows Vista to Windows 7. I bought to download the rom update the Microsoft store and downloaded, but when I try to start the upgrade I have a stateing message that it is impossible to create or save new files in the folder where it was downloaded. I checked the security permissions in the file and made sure that no programs are 'read only', but it won't always go beyond this point!

  Hello
  
  What is the edition of Windows Vista installed on the computer?
  Make sure that you upgrade to the correct version, some versions of Windows cannot be upgraded with the installation disc you are trying to use. For example, you cannot upgrade a 32-bit version of Windows to a 64-bit version, or upgrade a higher edition of Windows like Windows Vista Ultimate Edition, to a lower edition, such as Windows 7 Edition Home Premium. If this is the case, you will need to use the custom during installation option.
  Before you attempt to upgrade, please run the Windows 7 upgrade Advisor:
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor
  Also, check if your computer is compatible for Windows 7, using the Compatibility Center:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
  To learn more about the upgrade process, please visit the link below:
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  I hope that helps!

• I need to change the folder where download windows updates, I know there must be a way to do this.

  Could someone help me on this issue.

  I need to change the folder where download windows updates, I know there must be a way to do this.

  Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

  If you want to free up disk space, see the following:

  • How to back up and restore your files manually
  • How to free up disk space in Windows

• I forgot to backup Outlook Express! However, the .dbx files are all in the data folder of Application that I have back up! How can I see what is in them to import to my chosen e-mail program?

  Original title: .dbx files

  I've updated computer laptop of my client from Windows XP to 7.  I forgot to backup Outlook Express!  However, the .dbx files are all in the data folder of Application that I have back up!  How can I see what is in them to import to my chosen e-mail program?

  This is how you would normally import into Windows Live Mail. If all goes well it will give you enough of a jump start.
   
   
   
  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail.
   
  
  WLMail 2011/2012: folder button. Import Messages. Microsoft Outlook Express 6, and the point where it was saved.
   
   
  
   
   
   
   
   
   
   
   

• Try to copy a folder with subfolders, some don't copy, get the message that the folder names are too long under Windows 7

  Hi, when you try to copy a folder with lots of subfolders, some files don't copy.  I get a message that the folder names are too long, and the only option is to ignore these files.  Anyone know the maximum folder (and also) name length that will copy windows 7?

  Thank you

  Steve M

  Hello
   
   
  a. What are the data you're trying to move?
  b. what operating system (for example Windows files) files?
  c. What is the method that you use to copy data?
   
   
  Windows 7 supports filename up to 260 characters. I would ask you to decrease the characters in the file name and then try to copy the files.
  
  Let us, run disk checking hard disk utility and then check.
  Here's how:
  1. open the computer by clicking the Start button, click computer.
  2. click on the drive you want to check, and then click Properties.
  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  4. click on start.
   
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a folder with 140 tif files I want to convert to PDF. Is it possible to select the folder and convert all files or what I need to do each file individually?

  I have a folder containing tiff 140 files I want to convert to PDF. Is it possible to select the folder and convert all files or do I have to convert each individually?

  Hi MBASparky,

  It is possible to convert all the TIFF files to PDF in a go with Actions in Acrobat Pro ms.

  You can also perform this service Pack PDF help.

  Go to https://cloud.acrobat.com/convertpdf

  Sign in with your credentials

  Click on select files to convert to PDF

  Click on choose the files on my computer

  Of the open a file dialog box, navigate to the folder where you have all the TIFF files and use CTRL + A to select all files.

  I would like to know if it works.

  Thank you

  Abhishek

• How can I change the folder where the cache should be registered?

  How can I change the folder where the cache must be saved in Adobe Photoshop CC 2014?

  GoTo Edit > Preferences > discs to work.

  Drive D check and uncheck the C drive.

  Move the D drive to the top.

  Restart Photoshop.

  

• I just upgraded from CS 6 (Dreamweaver) and now when I click on an image on a web page in Dreamweaver is wrong in the folder where the photo is stored and more.  If this continues, I'll have to go back to 6 CS that I put in a lot of photos.

  I just upgraded from CS 6 (Dreamweaver) and now when I click on an image on a web page in Dreamweaver is wrong in the folder where the photo is stored and more.  If this continues, I'll have to go back to 6 CS that I put in a lot of photos.

  I use dw cc and I just double-click on the photo I want to change in dreamweaver CC and my images folder opens, select new photo and then it updates and I'm good to go, I use a mac

• My computer with Windows 7 does not display photos in folders when you open a folder where are saved in photos.

  My computer with Windows 7 does not display images in folders when you open a folder where are saved the images there, I do not see any image photo immediately. I don't see it when I click Open the pic. Then for the next photo, I have to click Open once again, one by one. So without opeing one by one, I can't have see images, it is very difficult for me to manage all the images.

  The following article might be worth a visit:

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html

• Where are all the buttons?

  Residence dear users,.

  I'm new to the Adobe CC series, but I used CS5. I'm doing a game with flash, like I did with CS5, but where are all the Flash buttons. An example: button when you're working with AS3, as the good all your code button it looks like beautiful (button).

  Is it possible to make the old style or something?

  Casper

  If you mean the auto-format button to format your actionscript code, it is not in the version initial cc flash.

• Call the library function does not find the DLL in the directory where are my LLBs

  I'm using LabVIEW 8.6.  I have a set of screws in several LLBs.  All LLBs located in a directory.  Most of my screws is wrappers for the functions in a DLL.  I was told to put my DLL in the directory where are the LLBs, and apparently this is how the previous programmer has worked (using an earlier version of LabView).

  In the configuration of the library call, I've specified .dll without path.  (This is how we want our screws are an API that will integrate other programmers, so I don't know where they put things and I can't use absolute paths).

  When I insert the VIs in LabVIEW, LabVIEW can not find the DLL and wonder of spotted.  It's just that here in the directory with the LLBs and when I double click on it, everything works fine.  However my absolute path to the DLL now appears in the library to call configuration, and we don't want that.

  Does anyone know how to make this work?  I guess the location of the screw (or LLBs, in this case) should be the current directory and thus Windows search there for the DLL.  However, it seems that this is not the case (in the least, in the latest version of LabVIEW).

  Thank you.

  Batya

  Well someone using your library should not have to dig into your screws and do it all on his own. Instead your library must wrap that and hide disorders it altogether.

  The cluster of error has been added when the dynamic path option has been added. It is not useful hide this error output, so it's always there. As well as the dynamic path, there was the improved error handling added the CLN. One of them is that the level of verification when calling function errors (exception handling) can be specified. I guess that some of these options may generate an error code instead of bring up a dialog box, as they did before and that the output of error code can be useful even in the case of static calls.

  As to what you want to do, I would have long managed that with a DLL that has essentially the same functions as your other wrapper DLLs and an initiliasation function that returns a pointer to a structure of functional distribution based on the actual DLL you want to call. Quite like what an object-oriented function dispatch table is. Then, when your interface initilising you call initialize function and specify the device interface/type that you want to use and after that all other functions take a pointer extra function parameter expedition as the first parameter, in addition to the parameters of the real function. This dispatch function pointer would be just a pointer to a structure that contains the table of function for this interface pointers and the sake of LabVIEW would simply be an integer of size pointer.

  The wrapper function then checks the pointer structure validity send feature and call the actual function with the remaining parameters. It is a C programming and may require a planning and desigining the different interfaces to facilitate this kind of technique of the expedition, but it will certainly pay to long-term and make your library even can be used in previous versions of LabVIEW, so that VB etc. without delicate dynamic loading in the level high, programming environment.

  Rolf Kalbermatter

• I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64.

  PROBLEM WITH MY LAPTOP CONFIG AND SYSTEM.

  I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64. It has been preloaded. I am VERY confused!

  When you view this file.

  If you check through the Task Manager > processes (tab) some will note * 32 because they are native 32-bit applications running on a 64-bit operating system.

• Where are all the Mailings form?

  Hello

  Where are all the Mailings form?

  Thank you

  Rahul

  Hi Rahul

  all remittances form captured in the form data.

  Thank you

  edynamic expert Eloqua

• How to check the table have are all views in oracle

  Hello
  How to check the table have are all views in oracle

  SELECT * FROM user_dependencies
  WHERE type='VIEW'
  AND referenced_type='TABLE'
  AND referenced_name ='Your_Table_Name' 
  

  You can use dba_dependencies to find views in the different schema.

• Cannot delete the folder where the backup is saved.

  I have recently reinstalled Windows.

  I have restored my backup in a 'special' folder on the desktop, so I can have the most control over what to keep and what to delete.

  now, after I copied the stuff I wanted, I try to remove this unnecessary 'special' folder but Windows won't let me delete it.

  I tried to regain control and possession but still get an error Windows cannot delete the folder. and with two options, "try again" and "Cancel".

  Can you help me? This file is large and takes place on my hard drive.

  Hello

  1. what happens when you try to delete the folder?

  2. do you get any error code or error message?

  I suggest to try to delete the file in safe mode and check if it helps

  Start in Safe Mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Also try the steps in the following Microsoft article and check if this may help.

  Why can't I delete a file or folder? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder

  Hope the information is useful.