I need a driver bluetooth for the PRODUCT ID:-F7P48PA #ACJ

Similar Questions

• device driver Bluetooth for windows 7 64-bit sony vaio

  Hello

  I need device driver bluetooth for windows 7 64 bit for sony vaio

  device driver Bluetooth for windows 7 64-bit sony vaio

  Please help me

  -Nicolas

  After spending an obscene amount of time researching this Bluetooth stupid nonsense this week, I finally opted for a solution.

  This is how to solve the "Bluetooth peripheral device is not a driver:
  I use the following materials in a dozen different tests:
  -Only for Broadcom based on USB from Belkin and Targus dongles
  -Windows 7 Professional 64-bit on four different computers
  -4 different Bluetooth headphones: Plantronics One, a matrix and two Motorola
  -Bluetooth file transfer wasn't of interest, but I tested with two different phones
  This guide will be useful for those with similar... hardware configurations and for those who have tried all the other nonsense without result.  Especially that many times repeated "Just install Windows Mobile Device Manager."
  -- -- --
  Step 1: Ignore 99% of you think that you have learned about this problem.
  It will be * probably * boil down to a missing COM port.
  Step 2: Certainly ignore the bit about installing the Windows Mobile Device Center
  (Unless you have a Windows Mobile-based phone and/or have another use for a flavor of Windows 7 of Activesync).
  Step 3: Stop looking for a driver for something called a "Bluetooth device device.
  There is no such thing. If you look at the Bluetooth installation take place, you will notice that all the components of the Bluetooth technology initially as "Bluetooth Peripheral Device" and then once Windows ID each element, the appropriate driver is installed and the name replaces "Bluetooth Peripheral Device" to something like "Hands-free Bluetooth Audio" or "Bluetooth Remote Control" etc.
  -- -- --
  Unfortunately, most of the people reading this will have tried one or more of the following:
  1.) install this stupid Windows Mobile Device Center
  2.) install any number of drivers Bluetooth who-knows-what from who knows where
  (3.) running all kinds of utilities third driver
  4.), forcing several facilities from pilot to operate in Win98, XP or Vista
  5.) sacrificing countless animals
  The end result is a plethora of useless software and/or driver and/or updates... facilities and some dead animals.
  -- -- --
  Instead, here is the solution.  I tested it with three different USB Dongles (2 Belkin and Targus 1) and on four different machines: HP, Sony, Toshiba and another HP. Two were newly not framed with Windows 7 Professional 64-bit and two have been upgraded to Vista to the same OS.
  With each machine, I plugged the following helmets: a legend of Voyager from Plantronics, Motorola S9, Motorola S805 and matrix AF62 and a Samsung S3 and an HTC Android.
  So I guess it's fair to say that it is a solution for one of these dongles... but in reality, most based on Broadcomm USB dongles is affected. I ran across these stages in four different boxes after checking that the beast ""Bluetooth peripheral device is not a driver " "
  appeared during installation.
  1.) If you did any of the unsuccessful steps mentioned above, enter the control panel and delete everything that you have installed.  Kill all the entries Broadcomm or Widcomm bluetooth. Delete all 3 rd-party driver maintenance apps. Restart a machine clean.
  2.) locate and install a Broadcomm 6.0.1.6300 OR 6.2.1.500 driver.  Either one works, but the last (most recent) has much better management tools for Bluetooth device
  .  I tested the installation of separately and also starting with 6.0.1.6300 and then upgrade to 6.2.1.500.
  (Ignore the stupid Updater Driver Broadcomm they grow to their website - it is useless for the majority of us out there.)
  (3.) that you install one of the above, you will see a notification regarding the installation of the various components.  Click this pop-up window and watch the progress.  You will see that each "Bluetooth Peripheral Device" Gets a new name, as the related driver is installed.  In my tens + tests, each & every item at this point got the green check mark of success.
  4.) now attempt to pair the device of your choice
  .  IF only the manufacturer provides separate drivers, do not install them again, regardless of their instructions.  See how Windows gets its own.
  5.) as soon as the match starts, you will see more notifications for individual driver components.  Click on one of them and observe a similar progression... Except that you will have a ""Bluetooth Device device ' with the dreaded Red X and the complaint that no driver was found. "
  6.) do not despair
  ! This happens the first time connect you a new Bluetooth device.
  7.) wait for the installation to complete.  Despite the dialog box display the list of components of Bluetooth with a red X, you probably have another window saying that the perfectly paired Bluetooth device.  But you and I know that he didn't. Confidently click to close this dialog box.
  8.) open Device Manager (via the Control Panel, the computer properties), and you will discover that cursed Device Bluetooth that is sitting there in the Middle under 'other devices '.
  9.) right click on the Bluetooth device with the yellow exclamation mark under 'Other devices' and select 'Update Driver' - then:
  Click on:
  a.) browse my computer for driver software
  (b) let me pick from a list of device on my computer drivers
  (c.) in the common hardware types list, select:
  --->>> Ports (COM & LPT)<>
  d.) d.) under manufacturer, select Microsoft
  e.) depending on the model, choose "Standard Serial over Bluetooth Link" & click "next".
  f.) when you are prompted with the update driver warning, click 'yes '.
  g.) with joy to read the message that "Windows has updated the driver software.
  (h.) read for pleasure, and then click "close".
  (i.) to confirm that this disorder is really fixed (assuming compatible devices, etc.) Right-click on the Bluetooth device and choose "Troubleshoot" - that there should be no reported problem.
  10.) you shouldn't have to restart, but you POURRIEZ have need spend the power of your Bluetooth device Off & turn it on again to let it reconnect again (just NOT re-pair... re - connect). About a dozen tests, I had only to do once, and it was with a 3-year-old-Bluetooth headset.
  -- -- --
  I have argued my way in the solution by installing on a Vista machine where everything worked perfectly.  After the installation of various devices under Vista, I spotted the COM Port in Device Manager - which was the only element that did not appear in the installation of Windows 7... but instead remained at the dreaded 'Bluetooth Device device".
  Windows Mobile thing worked only for some people because it was fundamentally address a bunch of different physical possibilities... but for those who did not have success, it's because Windows Mobile Kitchen Sink approach did not include the driver Port com
  -- -- --
  Voluntarily, I don't understand not all links to the drivers as one.) change links and b.) I don't want to be responsible for some knucklehead packaging site a Trojan horse in the zip file.  Let Google your friend and your instinct be your guide.
  I will say that I used a 6.0.1.6300 directly from the Belkin site and a 6.2.1.500 directly from the site of the bridge.
  I hope this saves people a lot of frustration.

• I need to download creative suite 5.5 on my computer.  I have no disc drive.  but the product is registered and I have a product code and activation code because I already put it on another machine.  but I know that I am allowed to put on both machines.

  I need to download creative suite 5.5 on my computer.  I have no disc drive.  but the product is registered and I have a product code and activation code because I already put it on another machine.  but I know that I am allowed to put on both machines.

  kglad links in response #1 here https://forums.adobe.com/thread/1930162

• I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud.  I just want to use my version can help you or seated, me?

  I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud.  I just want to use my version can help you or seated, me?

  I have stick thread regarding the CS6 and Cloud Creative Re: What's up with Adobe Application Manager CS6?

  and another, if you are confused enough, perhaps another angle my old CS6 now asking me to connect to the cloud

  and maybe he has your response a bit clearer how we prevent cloud creative resume my perpetual license CS6?

• I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?

  I downloaded Lightroom 6 thanks to Amazon and never received an email from Adobe with the serial number, I need to finish my license/registration for the product...where/how can I get the serial number?

  Hello dakineny,

  Please refer to the link given to find your serial number: quickly find your serial number

  It will be useful.

  Concerning

  Bianka Attre

• activation key for the product during the victory 8.1 update

  I use HP ENVY m6 recently the hard drive had crashed. so I ordered for a recovery of hp and I put it and win8 installed. When I switch to 8.1 it ask for the product key. It shows that "this product key isn't not work.you might need to contact the store or company, that you have purchased from windows or you can buy a new key from microsoft"

  Hi @kalyanCN ,

  Welcome to the HP Forums!

  It is a wonderful place to find answers and ideas!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your hard drive has crashed and you have ordered a recovery kit.  You did the recovery of Windows 8 and have now updated for Windows 8.1 but have a problem with activation.  Here is a link to Activate Product Windows 8 to help you solve this problem.

  If you still encounter a problem with the activation, I suggest that you contact HP support for help.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product.

  Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Help with settings in the capture of a 1968 for the Production of DVD movie

  I have a problem with the Premier Pro and need help.

  I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
  
  My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.

  
  

  The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.

  I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.

  
  

  Here is a picture of what appears on the screen of the Sharp VL - AX1

  
  

  

  
  

  Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)

  
  

  

  
  For any help or suggestion will be appreciated. I have this project done Friday.

  
  

  George

  The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.

  Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.

• Need a visual cue for the status of Plugins

  Need a visual cue for the status of Plugins:

  . . . "Ask to activate" - these are light gray - it's good

  . . . "Always enable" - should be in light green

  . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

  Be able to sort them based on the State

  The above would make it easier to verify that they are the way you want

  There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

  .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• I get the error code 1706 - valid no source is found for the product my Hub. Windows install cannot continue.

  I get a pop up saying error 1706 that valid no source is not found for the product my hub. Windows install cannot continue.  Also "the feature you are trying to use is on a nework resourse which is not available."

  Can someone tell me what to do and what is the problem

  Thank you

  Hi Traceyjane,

  (1) when exactly it happens?

  (2) do you use the computer as an administrator?

  (3) what is the number of brand and model of your terminal?

  If you try to install the software for your hub, make sure that you install the correct package for your computer.

  Step 1: Try to install the program as administrator right click on the installation program files and select run as administrator , click continue if you are prompted to confirm.

  Just check the items below that addresses a similar issue

  The feature you are trying to use is on an unavailable network resource
  http://support.Microsoft.com/kb/828376

  You receive an "error 1706. Valid any source not found for the product

  http://support.Microsoft.com/kb/253768

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just installed Windows 7 on a part of the Dell Vostro 1500, l features notebook.__In control, I have two mistakes "Device Base system has not a driver" __There is no driver installed for the Base system device. _ No fixed

  I just installed Windows 7 on a Dell Vostro 1500 laptop.
  In the pane control, devices of l, I have two errors "device Base system has not a pilot.
  There is no driver installed for the Base system device. Not fixed
  Apply the solution to the complete driver problem
  Install a driver for this device does not work

  Troubleshooting gives me two messages:
  The first is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0592 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0BF0
  Error code: 28
  The second is: there is no driver installed for the Base system device.
  The device information
  Name: Base system device
  ID: PCI VEN_1180 & DEV_0843 & SUBSYS_02281028 & REV_12\4 & 1F967EE5 & 0 & 0AF0
  Error code: 28
  I cannot locate a driver through web search - how do I know what are the devices? and where can I find a driver?

  Try to update the drivers using Windows Update.  If this does not work, try the versions of Vista of Intel and Ricoh under Chipset drivers on the website of downloads & drivers for Vostro Notebook 1500 . Make a restore point first.

• The drive letter for the files on my external drive does not match the designated letter MyWindowsApp, after briefly changing pots

  On my Windows 7 laptop, I briefly moved an external hard drive to a USB port to another and then back.

  The reader is referred to as F, as it was originally, but since the temporary move the path for some files now show that E.

  I went to disk management and confirmed that the drive is detected as F.

  This disrupts programs such as Adobe Premiere Elements. It always hurts new information loaded in the disc I load that is in F, but the said path E. The file is clearly on record.

  Hello

  I see that, after changing the port, the drive letter for the external drive has changed. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  You can follow these steps to assign a letter to the external drive and check if that helps.

  1 - click on 'Start' button.

  2-right-click on "Computer" in the list that appears.

  Option 3 - Select the 'manage '. If a warning appears asking for your permission to continue, click on the OK"" button.

  4 - Choose "Disk management" in the left column of the computer management window. Find the USB in the list that appears in the gray bottom of the center column.

  5-click right on the part of the screen that represents the USB key, and then click the option "letter of change of road and railways.

  6 button - click on the 'change' in the window that opens.

  7. ensure that the radio button to "assign the following drive letter:" is selected. To the right of the present is a drop-down list with the drive letters currently not assigned to all of the drives on your local system. If you are not on a network, choose the drive letter you want for your USB key and then click on the OK"" button.

  8 - click on the 'yes' button in the confirmation box that appears.

  Refer.

  Change, add, or remove a drive letter: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

  I hope this helps.

• There is no driver selected for the item or a set of device information

  There is no driver selected for the item or a set of device information

  Error message when I try to update the mouse driver or video driver. Windows 7

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not update the driver. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I will help you solve the problem.

  Before troubleshooting, I have little information about the issue.

  1. When exactly do you get this error?
  2. Did you of recent changes to the computer before this problem?

  Try installing the driver in compatibility mode. Here are the steps how to install drivers in compatibility mode.

  (a) place the driver on the OfficeSetup file.

  (b) make a right click the driver installation file and select Properties or compatibility tab select the appropriate options in entries to the displayed image.

  (c) click apply, and then click OK.

  (d) right click on the file and select run as administrator to install.

  I also recommend that you contact the manufacturer of the hardware device, and you learn about the support of future drivers for Windows 7.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Walking from Vista to Windows 7 system keeps asking for the product key that key is not correct.

  walking from Vista to 7 system keeps asking for the product key

  Related topics

  • I am in the correct product key, because it is on the back of my...
  • MY PRODUCT KEY DOES NOT WORK TO UPGRADE MY WINDOW7 PROF. TO GET...
  • The product key is not valid for this installation. Please use the...
  • 25 letter product key is not be excluded by my new PC to open...