Windows Mail does not open. It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. »

Similar Questions

• The error that says "this application has failed to start because sqlite3.dll (also sqlite3.prepare.v2) was not found. Reinstalling the application may fix this problem.

  These messages appear, one after another, at startup.

  Something you have running at Windows startup that uses SQLite is a failure. Find out what this program is (so you can stop it) by managing your Startup:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Error "this application has failed to start because iertutil.dll was not found" on startup

  original title: iertutil.dll problem

  I have exactly the same problem as helpneeded1000. The message box that says: "this application has failed to start because iertutil.dll was not found. Re-install the program may fix this problem. "Get right after you start windows xp. It is constantly after I have trying to login or close. Shortcut buttons, start menu, everything on my desktop disappeared. I tried to open the box of the Task Manager by pressing Ctrl-alt-delete, but this is as far as going to my knowledge. Can someone help me solve the problem please? did askme to download any kind of things because I don't have any access at all.

  Thank you.

  Quimbee

  Hello quimbee,.

  In addition to the response of Naman R, please consult the link below if you are still having problems.  Please follow the steps to Joselbarra and let us know the status.

  When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/system-has-failed-because-iertutildll-was-not/6dd913ba-cc0f-4828-a55a-477771d25b66

  Thank you

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• Outlook Express could not be started because MSOE. DLL could not be initialized. Outlook Express is not installed properly.

  Original title: could not open error on my outlook express Message

  When I try to open outlook express, I get the following two messages.  Outlook express could not be started.  The application is not in the message store outlook express.  Your computer may be out of memory or your disk is full. I cleaned the disk and I still get this message.  I also have another message saying Outlook express could not be started because MSOE.dll Outlook is not installed properly.

  Pleae help

  Is MS Outlook or Office installed also?

  If so, see this.

  See the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995

  If Outlook is not installed:

  When OE crashes or won't start
  http://www.insideoe.com/problems/errors.htm#crash

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Cannot open Windows mail, WinMail.exe - Unable to locate component, could not start because SHELD32.dll was not found

  Original title: my Windows Mail program and shortened, will not open.

  My Windows Mail program and shortened, will not open.  I get a box of popup titled WinMail.exe - impossible to component locat.  Inside it is said he "could not start because SHELD32.dll was not found."  Reinstalling the application may fix this problem. "When I click OK another box opens with"MSOE.dll is not found. »

  Hello

  I moved your post to the forum Windows Vista under programs category. They are experts in the field of your request and would be in a better position to answer your concerns.

  Thank you.

• Windows Live Mail could not be started because msmail.dll could not be loaded. What should I do?

  Start Windows Live Mail

  Windows Live Mail could not be started because msmail.dll could not be loaded.  What should I do?

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Windows live mail could not be started because msmail.dll could not be loaded

  Hello, I received an error message "windows live mail could not be started because msmail.dll could not be loaded" what can I do for her? Please help me. Thanks to you all

  Hi keeewi,

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will provide the support you want.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Share of software Flip does not completely load due to not write the script of window installation package

  Part of Flip software does not completely load on windows vista... error message windows package install will not write script to complete the installation

  Hello hedubang,

  Thanks for posting on the Microsoft answers Forum.

  I suggest to try the safe mode and see if you can install it in safe mode or if there is a conflict.

  Start the program in safe mode

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

  Note: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

  To determine if the problem that occurs with the program is caused by another program that is running in the background, we recommend that you restart the computer in safe mode and then test the program. If the program runs correctly in safe mode, but does not properly run in normal mode, it probably is another program that is conflicting with the program in question.

  To determine which program is causing a conflict with the program in question, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.

  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base:

  929135 (http://support.microsoft.com/kb/929135/) how to solve a problem by performing a clean boot in Windows Vista and Windows 7

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Shorter Oxford English Dictionary does not settle "this program cannot start because neko.dll is missing.

  OT: neko.dll dissappeared.

  Hi guys,.

  Windoze 7, I had the SOED (Shorter Oxford English Dictionary) working, then all of a suddy, it does not open. When I try to reinstall from the disc, I get: "this program cannot start because neko.dll is missing from your computer, try reinstalling the program to fix this problem." Easy to say, of course, but where can I find a safe download? Go to Micromush site - search returns no results.

  Tried the following without result:

  "When you install software that uses the dependence of neko.dll, the software should automatically save the file for you. In some cases, your DLL file can not save correctly and accordingly, will provide an error "neko.dll unregistered. Fortunately, you can use a built-in utility called "Microsoft Register Server (regsvr32.exe) to register your neko.dll file again.

  How to record again neko.dll from an elevated command prompt (Windows XP, Vista, 7 and 8):

  1. Click the Start button.
  2. Type "command" in the search box on ... Are NOT hit ENTER yet!
  3. While now CTRL-SHIFT on your keyboard, press ENTER.
  4. You will be prompted with a dialog permission.
  5. Click Yes.
  6. Type the following command: regsvr32 /u neko.dll.
  7. Press ENTER. This will Cancelled the REGISTRATION of your file.
  8. Type the following command: regsvr32 /i neko.dll.
  9. Press ENTER. This desire to RE-SAVE your file.
  10. Close the command prompt window.
  11. Restart the associated program neko.dll error. »

  Any suggestions?

  see you soon,

  Paul

  Hi Paul,.

  Thank you for your reply,

  As you have tried all the steps in the post above and none of them worked. I suggest that the manufacturer of the Application for additional support.

  See the following link for law enforcement support.

  http://www.MobiSystems.com/support/

  Hope this helps, please get back to us for additional help on Windows. We will be more than happy to help you.

  Thank you.

• How to load programs from a CD which does not automatically load

  I am new to windows 7. I want to load a program from a CD. It was easy with the Control Panel Add and deleate one program; or the execution of the order. Now, I don't know how to load a program from a CD which does not automatically load. Help!

  How can I install software on a disk?

  1. Insert the CD/DVD
  2. If the CD is not automatic open start Windows Explorer - click on start, then click computer.
  3. in the Windows Explorer window, open the drive that contains the installation files. For example, if they are on a CD or DVD open that drive or the letter of the disk drive.
  4. in the disk that contains your files, look for either a configuration or installation of the file. Double-click on this file should launch the installation of the program, a game or utility. If you see more than one configuration or install files, try to locate the file for the Application, double-click each setting or install files until you find the file that starts the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• WRT54GS V7 Web UI does not completely load

  I already talked to Linksys support and they had to do a hard reset to my router but it does not solve the problem. What is happening is that I'm constantly having to plug and unplug my router to access the Web user interface. I go to the default address 192.168.1.1 and my computer sees the router, but the page does not fully load and shows in the lower right corner, there is an error any (yellow triangle) and it is constantly "waiting for 192.168.1.1 of." Its a system XP with IE8, but I also tried Firefox. Now, if I have access to the router with my laptop, connected wireless, it loads but it takes forever to load up, minutes to load, but it will load.

  If I unplug the router wait 30 seconds or so, plug again, the office gets access again. I don't know what to do at this point. I have another router that I could use, but it never seemed properly open ports and this one seems to do.

  Otherwise, the router works fine. Internet connects, the network looks good... of ideas please?

  Try to update the router to the latest firmware... This might help...

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]