I need help with my streets & trips, and I can't get anything to recognize my product key

Similar Questions

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI?

  Original title: driver ethernet

  I NEED ASSISTANCE WITH MY ETHERNET DRIVER.  HOW CAN I GET THIS TO WORK NEW TI

  Download and install it

  The driver should be available in the manufacture of computers site

  Use the snid on a label on the computer to search with while you're there

  Or if the motherboard came with a disc to load and the reader will be on it.

• Need help with Exchange 2010 Diag and implementation

  I NEED HELP FOR EXCHANGE 2010 DAG AND THE IMPLEMENTATION THAT CAN HELP-IM I IN THE RIGHT SUPPORT GROUP?

  Hello HectorLopez_790,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question with Exchange would be better supported in the TechNet forums.
  Click here for a link to transfer your question in the forums of Exchange.

  Thank you

  Marilyn

• BlackBerry Z10 need help with the facebook chat and notifications

  Hey, guys.

  Since I updated to version 10.2.1.2102 of the software I was not able to receive messages from the hub of blackberry facebook chat. Before the update whenever I had my phone connected to a wireless network it was automatically getting messages facebook on the hub. Now, although I can send messages and receive messages if this contact is online, once I close the conversation hub is gone and I don't get the messages, only the "new messages of * person *" e-mail after a certain time.

  In addition, I don't get notifications about birthdays of the people. I get the "next event" x hours notification on the lock screen, if I go in the calendar I see the notification at the top of the page, but it does not sound to warn me of my birthdays from the contacts.

  Can someone help me with this two problems? Thank you!

  Fact. I needed to update the facebook app.

• Need help with the OSB Assign and replace the

  I have a proxy service that receives the SOAP message:

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

  " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < / soapenv:Header >

  < soapenv:Body >

  " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

  ...

  < / pidx:OrderChange >

  " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

  ...

  < / DeliveryInformation >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

  The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

  I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

  In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

  1. an XQuery query transform to generate the XML SOAP just described

  2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

  I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

  It is the right approach or is their a better way of

  1. create the SOAP wrapped XML

  2. call the Business Service.

  Any suggestions are appreciated. I can provide more detail if necessary.

  Kind regards.

  Thank you Vlad...

  I think I'm getting in that direction now. Just do some debugging.

  Appreciate the input. I will update with final results.

  Again, your help is greatly appreciated.

  Kind regards.

• Need help with keyframes for start and stop an effect

  I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

  The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

  If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.

• I need help with an error message that I started to get during the build.

  BB Storm on JDE 4.7.0

  I created a small class to allow me to easily create and play sounds. I have just run the following code to play a sound at any time (and I can play again too).

  IpAudioClip crash("libs.testother","/testother/crash.aac","audio/aac");
  ...
  if (crash.isSupported("audio/aac"))
  {
      crash.play();
  }
  ...
  

  Now, when I build, I get an error that I've never seen elsewhere as follows:

  libs. IpAudioClip: error! : lack of card from the pile to the label: 35
  Error while building project

  When I get this error on the web, I see preverify associated messages.

  First of all, can someone explain what the preverify step is all about? Also, why it is not managed by default in the JDE?

  What is causing this error? What should I do for the JDE to fix?

  According to me, that there is a box of pre-build in the properties of each file. Do I need to add a step preverify in there or something? How do we know when to do (if that's the solution)?

  Any info would be greatly appreciated.

  Thank you

  -Donald

  I solved it myself. JDE projects can sometimes get damaged. I had a project that was link a library even if he hasn't said to link this library. That's what was causing the error message. The solution was to delete the project and create a new one of the same name, overwriting the old and adding the same files as before and be careful not to add libraries was planned initially that he didn't need. Now all this very well built.

  This error message means there is a problem with a jar somewhere.

  THX

  D

• help with bad reformatted xp Media Center can't get updates get 80244019 0 x, 0 x 80240036

  need help I reformatted my system because it was little I didn't know mirosoft update did some changes once again, it seems that whenever I have to reformat, it becomes more difficult a harder to get updates cannot use Mr. fix it it takes sp3 to run an i cannot run sp3 until it is ready for her was to remove the last time a those of error codes do not really since for me

  Hi kathyjeffers,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and type Winver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, the Upgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

• NEED HELP WITH SELECTION was GOOD AND good POWER (HP dc7900 Convertible Minitowers) MARKET

  Hello! I have a HP dc7900 in Minitour Convertible with the following specifications:

  Core 2 Quad q9400 2, 66 GHz

  nVidia GeForce GT430 1 GB

  Elpida 2x2gb RAM 800 mhz (I'll add 2 x 2 earlier so I can get 8 GB)

  Card mother HP 3032 h

  Block POWER 365 stock w.

  So I was planning to buy a Radeon HD 7770 (MSI, Palit, or Sapphire) because I have a small budget and this seems to be a good fit, but there's better food, so I was wondering if there are more good, good markets that would be able to manage my PC (with the new gpu, 8 GB of ram and a single PCIe 6-pin). I also have an MS PRO-550 Industrial, ATX in my old PC and I wanted to add, but I just discovered that it is very bad and that there actually 200w (not 550) :/ Any help would be appreciated P.S I found 'used' Corsair CMPSU-400cx and an Antec SU - 430 then how do get?

  I see that your desired card has a minimum 400W power quantity, but I recommend moving more to a 500W or 600W for handling units your other hardware too although a little extra space so you would be upgraded.

  I am very pleased with the PSU Corsair, I recently installed a CX500 in my machine, although in a smaller case, you need good cables.

  I hope this helps.

• Need help with an Export-CSV and ForEach loop

  Hi guys, I'm total NOOB in CLI so please forgive the stupid question.

  I need your expert advice for the very large environment and will award points.

  I have a working script that alerts to our logout ESXi hosts, maintenance and NotResponidng mode

  His job well, but need to send a mail to all three of our VCenters

  Current script only works for a VC at a time. How do I ForEach and always the hose of the same body CSV and HTML

  It would be nice to have an HTML and CSV output that looks like this (assuming that there are currently disconnected etc.)

  I have a set of credentials, that work on all 3 of my VC

  VC1

  Host1 disconnected

  Host2 NotResponding

  VC2

  Host3 disconnected

  Host4 NotResponding

  VC3

  No disconnected/maintemance/notresponding hosts for VC3

  Here is my current code, etc. of the hidden passwords >

  # Clear old sessions
  Disconnect VIServer VC01-confirm: $false

  # VC01 VC check for disconnection and Maintenance mode and does not
  SE connect-VIServer-Server VC01 - FakeUSer username-password FakePassword

  $Report = get-VMhost-State disconnected, maintenance, NotResponding | SELECT name, connectionstate

  # scan info to be html and give him a date stamp

  $ReportHtml = $report | ConvertTo-Html | Out-string

  # Write CSV file and give it a character of data

  $filePath = "C:\PS\Output".
  $filename = "VC01disconnectedHosts".
  $CurrentDate = get-Date
  $CurrentDate = $CurrentDate.ToString ('MM-dd-yyyy_hh-mm-ss')

  $Report | Export-Csv "C:\PS\Output\VC_$Currentdate.csv".

  # Send the info by Mail

  Send-MailMessage-to [email protected] - subject VMwareMorningcheckVC01$ CurrentDate '
  SmtpServer - mail.sanlam.co.za - from [email protected] '
  -BodyAsHtml-body $reportHtml - accessories 'C:\PS\Output\VC_$CurrentDate.csv '.

  Thank you in advance for help.

  You could use a ForEach loop through all vCenters and combine the results in a $1 report.

  Something like that

  $vCenters = "VC01","VC02","VC03"
  
  # Clear old sessionsDisconnect-VIServer $vCenters -Confirm:$false
  
  $report = @()# Check VC VC01 for Disconnects and Maintenance mode and Not Respondingforeach($vc in $vCenters){  Connect-VIServer -Server $vc -User FakeUSer -Password FakePassword
  
    $Report += (Get-VMhost -State Disconnected,Maintenance,NotResponding | Select @{N="VC";E={$vc}},name ,connectionstate)  Disconnect-VIServer $vc -Confirm:$false}
  
  # parse info to be html ,and give it date stamp
  
  $ReportHtml = ($report | ConvertTo-Html | out-String)
  
  # Write out CSV file and give it a Data Stamp
  
  $CurrentDate = Get-Date -Format 'MM-dd-yyyy_hh-mm-ss'$filename = "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
  
  $Report | Export-Csv -Path $filename -NoTypeInformation -UseCulture
  
  # Send info with Mail
  
  Send-MailMessage -To [email protected] -Subject VMwareMorningcheck$CurrentDate `-SmtpServer mail.sanlam.co.za -From [email protected] `-BodyAsHtml -Body $reportHtml -Attachments "C:\PS\Output\DisconnectedHosts-$($CurrentDate).csv"
  

  I added the property vCenter for each line in the report

• Need help with PL/SQL so and then select

  Hello guys, I am new to the PL/SQl programming (only Java experience) and I'm pretty stuck to my task. It would be great if you could help me. I am in programming with Oracle SQL * Plus Version 10.2.0.3.0

  Whenever a user logs on to the server a database entry is created with information about the logged-on user. I need to create a PL/SQL command that selects all the information from last month. Unfortunately, the date_stamp column has a certain weird format: 1131210 for December 10, 2013

  
  

  My idea so far:
  

  
  

  DECLARE

  v_today NUMBER;

  BEGIN

  v_today: = TO_NUMBER (TO_CHAR (SYSDATE, 'MM'));       -Save the number of the month (e.g.12) in v_today

  IF v_today = 01 THEN

  SELECT * from audittrl

  WHERE the date_stamp between 1131201 AND the 1131231;

  ELSIF v_today = 02 THEN

  SELECT * from audittrl

  WHERE the date_stamp between the 1130131 AND 1130101;

  .......

  END IF;

  END;

  /

  Error code: "an INTO clause in this SELECT statement.

  I do not want to save the result to select a variable, hope you can help me. Thanks in advance.

  Hello

  6a4d1bcd-c00e-4dac-AB64-9b6bdb1652d1 wrote:

  Thanks, I'll try that, if still get caught once, I'll be back. Anway I'm not sure of the solution of Chris227, because I can't test it right now. From my point of view it gives you information the current month (e.g., December) and not the month previous (-online November), or have I missed something. ?

  You are right.  In addition, it does not for a given year.  If you have data from several years in the table, it will select lines for the month of December 2012, 2011, 2010,... but also of 2013.

  Here's a way to get around that:

  DECLARE

  prev_month_start PLS_INTEGER: = TO_NUMBER (TO_CHAR (ADD_MONTHS (SYSDATE-1)

  , "YYMM"1' "01"

  )

  );

  this_month_start PLS_INTEGER: = TO_NUMBER (TO_CHAR (SYSDATE

  , "YYMM"1' "01"

  )

  );

  BEGIN
  FOR (IN) rec
  SELECT *.
  Of audittrl
  WHERE the date_stamp > = prev_month_start
  AND date_stamp< >
  ORDER BY user_id, date_stamp - or other

  )
  LOOP
  dbms_output.put_line (rec.date_stamp);
  dbms_output.put_line (rec.event);
  dbms_output.put_line (rec.user_id)
  dbms_output.put_line (rec.host_name);
  END LOOP;
  END;

  This should also be more effective, because it will allow the optimizer to use an index on date_stamp.  Even if there is no index, it will be more effective because it avoids calling any function (for example, SUBSTR) on each line of the table.

  You needn't PL/SQL to get these results.  Just use SQL, you might say:

  SELECT event, host_name, user_id and date_stamp
  Of audittrl
  WHERE the date_stamp > = TO_NUMBER (TO_CHAR (ADD_MONTHS (SYSDATE-1)
  , "YYMM"1' "01"
  )
  )
  AND date_stamp<  to_number="" (="" to_char="" (="" sysdate="" to_number="" (="" to_char="" (="">

  
  , "YYMM"1' "01"
  )
  )

  ORDER BY user_id, date_stamp - or other

  ;

  Your front end will provide column headers and touch the data so that the columns line up.  It can also set the output to a file.  (For example, if your front-end is SQL * Plus, you can use the command of the COIL.)

  I guess date_stamp is a NUMBER.  If it is a string, the solutions above can be simplified a bit.

  This problem (and many other problems) would be so much simpler if date_stamp was a DATE column.  Using numbers or strings to store the date information is simply asking for trouble.

• Need help with movie clip display and timer

  I worked on a game in flash for the last couple days and this is my first major game so there was a lot of problems.  For those who have helped so far thanks so much!

  I think that I finally got it with a few exceptions, they are.

  1. the clip that serves as my pop-up window is popping up behind all my mobile icons.  I need over them of course.

  2. I need to find a simple way to stop time while the pop up is in place and to make up the time when she disappears.

  OR

  3. I need to add 5 seconds to the game clock when the user draws a question mark to make it appear as if the clock stopped.

  If someone has an incentive it would be greatly appreciated!  Thanks in advance!

  This is my code of timer clock to date!

  onClipEvent (enterFrame) {}
  If (_root.time == 30) {}
  _root. TECH = 9;
  _root.intervaln = 30;
  }
  If (_root.time == 10) {}
  _root.intervalz = 10;
  }
  If (_root.time == 0) {}
  _root.gotoAndStop (3);
  }
  }

  Kapelski

  1. you should not set any code for an object.  all your code must be attached to frames or in classes.

  2. use swapDepths() to change the depth of a movieclip

  3. There is nothing in your code on a timer.

• Need help with query for points and polygons, 2 tables of

  Hi all
  
  I'm slowly stumbling along trying to figure things out space.
  
  I have two tables, GEO_POINTS:
  (
  DEP_ID NUMBER (12) NOT NULL,
  LINE NUMBER 4 NOT NULL,.
  MDSYS. POINT_LOC SDO_GEOMETRY
  )
  
  and POLYGON_AREAS:
  (
  POLY_NAME VARCHAR2 (120 CHAR),
  POLY_DESC VARCHAR2 (120 CHAR),
  MDSYS POLY_POINTS. SDO_GEOMETRY
  )
  
  Neither table is engraved in stone, if any, I can change some structure.
  
  I'm trying to understand how to write a query to retrieve all the points in a polygon, perhaps even with an optional buffer provided by the user.
  
  Conversely, I would probably also need to know what polygons a point would have drawn in, and it's the only request I could make any progress on.
  
  What I have so far, which is not working properly, is the following:
  
  Select * from deposits_search where dep_id in)
  SELECT dep_id
  OF geo_points, polygon_areas
  where (sdo_relate)
  poly_points,
  (SELECT point_loc
  OF geo_points
  WHERE dep_id = 10282444),
  ("mask = ANYINTERACT") = "TRUE");
  
  In the light of the foregoing, I want to select all the lines of a third table (DEPOSITS_SEARCH), for all polygons which is a point. The DEP_ID column is my primary key for most of the data tables in the database, and the number rose in my application query. However, the above returns all rows. It should only return one, because I only have a polygon of test defined so far.
  
  Any help is greatly appreciated. Thank you
  
  Bill Ferguson

  in which case you must include a line of buffer for the interaction between the points and polygons (with a stamp),

  better, you use the SDO_WITHIN_DISTANCE operator.

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i77653

  Not so sure what you mean with "I always have problems while providing a point location and extract the polygons that point would be plotted in" as so-called before unless you want that as a 'transitional instance of a geometry. (Specified using a variable binding or a builder SDO_GEOMETRY.) »

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i78531

  Read what geometry2 means in there. Read the examples and you will see that you have the geometry second in space operator as a builder. If this is what you need.

  Luke

• Need help with copy/move programs and Admin files to other users of the account.

  I created 'connect users of accounts' and 'lost' the original Admin, now I know how to access certain programs and others in shift, click with the right button on connection as an administrator. but can't seem to copy or move some things into "shared folder" can someone help me please? Thanks for any help! No real computer smart right now, but im learning :)

  Hello

  You can also try to connect to the original administrator account by pressing CTRL + ALT + DELETE (all three keys twice at the same time), you will get the classic login prompt. Type the administrator user name and password. You should be able to connect.

  To activate this visible account to the Welcome screen, once logged in click on Start-> Run Type &-> Regedit-> ok.

  Navigate to HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> CurrentVersion-> Winlogon-> SpecialAccounts-> UserList

  Select the username administrator and set the value to 1-> of the close Registry Editor and restart your computer.

  I hope this helps.