I need help wiv a gamer tag for XBOX.

Similar Questions

• Need help to decode javascript tag for the release of HTML5.

  Hi all

  I'm working on a project in Adobe captivate 7 64 bit which consists of approximately 500 slides with most of the slides in text and image. The problem that I face is very unusual that I guess I'm the first to discover (according to my searches on google and the forums). So, after I publish my project the output works very well in html (local and online) BUT when I run index.html (i.e., out of HTML5) the course is not running and the screen is blank.

  After spending a week on the search online and using the strategy of trail and error, I was able to know that it was the text of the URL "F:\usrnew\purchase" placed in the middle of the course which caused damage of all. However, the url has been removed and the project has been submitted.

  After extra time, I discovered that the "\u" letter which is a JavaScript tag was causing the problem for the release of HTML5. I don't really know much to script, but discovered that the tag can be decoded using a programming strategy. Now, this is where my knowledge comes from a standby and needs a lift from you guys.

  Any ideas, help, sharing of knowledge would be very useful to me and all who could deal with this problem in the future.

  Looking forward for your point of view.

  Kind regards

  Mirza

  Voila! The problem is resolved.

  Solution: Change the single slash "------" to a double slash "\".

  See you soon,.

  Mirza

• I need help to install adobe flash for my G5 mac

  I need help to install adobe flash for my MAC OS X 10.4.11, I visited site and its telling me to upgrade my adobe flash, I really need help.

  Flash Player should be installed ONLY from the Adobe Web site.

  Here you can check which version of Flash player you have actually installed: http://kb2.adobe.com/cps/155/tn_15507.html

  You can check here: http://www.adobe.com/products/flash/about/ to see what version you need to install to your Mac and OS. You must first uninstall any old version of Flash Player using uninstaller from here (make sure you use the right pair!):

  http://kb2.Adobe.com/CPS/909/cpsid_90906.html

  and also that you follow the instructions carefully, as all applications (including Safari) closed first before installing. It is strongly recommended that you perform a permissions repair after installing anything from Adobe.

  After installation, restart your Mac and restart Safari, then in Safari/security preferences enable "enable Plugins".

• URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro

  Dear helpdesk,

  URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro...

  Send me the link for the driver or compatible.

  or email to: [email removed for privacy]

  Kind regards

  MRZ

  Message edited by SandyD on 25/11/2009 14:01

  Thank you

  but I can't download link for LAN

  FTP://ftp.HP.com/pub/softlib/software10/COL30407/PV-75371-1/sp44423.exe is not available.

  and I need driver motherboard chipset

  Help me.

  MRZ

• I need help, downloaded adobe flash player for windows 7

  I need help, downloaded adobe flash player for firefox windows 7. I download, I click Run and there is just a small black screen that says on the top of the page install adobe flash player but nothing happens after that. This small screen stays like that for hours maybe days. I tried troubleshooting but nothing seems to work. What can I do? How can I get the installation of the program?

  Use the installation offline programs:

  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

  [topic moved to the forum of Flash Player]

• NEED HELP WITH FLASH GAME!

  Hi all

  I am brand new to the forums here and I need help!  I'm on a very tight schedule for a flash game project, and can't seem to understand my problem.

  In my game of people shoot 4 different moving images and get points. Simple right? Although images is a question mark that can shoot people and when they do, I need flash to stop the timer game, a new popup window, the multiple choice question appear in the window and wait for the user to respond.

  NOTE: I would also like to be able to customize the size and location of the pop-up window!  Also, the question must be random.  I have a list of questions in a word doc.

  Then, if the answer to the question properly close window award 10 points and continue the game.  If you incorrectly answer the question, saying bad and then display the results of end game.

  Right now I have it to where it opens a pop up in a web browser and askes the question there.  The question is chosen at random from a file called random.html.  But I don't want the game to work this way. I want the game to open the pop in flash.  Can anyone help?  Time is a few hours, SORRY for THE SHORT NOTICE!

  Kapelski

  Everything to do with the movieclip is possible.  You can make sure the questions are changed dynamically whenever he appears... but it is a matter of design to be.  This has nothing to do with the popups... This is a clip that you can control the visibility of and what it contains.  In the Flash file will probably be easier to manage than a popup window outside, as far as the aspect programming and scoring goes.

  Create a movieclip that has a textfield for the question, and all what he needs in the way of user interaction.  Unfortunately, I didn't take the time to give a detailed approach to design.  If you manage to create a shooting game, creating a movieclip which works as you describe should be a fairly simple task for you.

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Need help 3d video Controller Driver for Hp 15 - laptop d103tx

  Hi all

  I use Hp 15-d103tx 4th Gen i5 intel laptop with Window 7 64 bit OS.

  I need help reagarding controller driver 3d video. I need this driver. I tried to find on the site official HP, but not found.

  Please send me the link for this driver.

  Thank you

  Sunil

  You are the very welcome, Sunil.

  Try the driver directly from Nvidia...

  http://www.nvidia.com/download/driverResults.aspx/75992/en-us

• My Ipod does not detect it on my computer and when I open it alawys loading, I need help of year and sorry for my English

  My iPod series is YM5387WZSZB please I need help of the year

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to return the item and check if it helps:

  iPod not recognized in 'My computer' and in iTunes for Windows

  http://support.Apple.com/kb/TS1369

• Need help to see an alarm for an AP story/event

  I need help to see an alarm last occurred about two months ago, here's the information:

  I had a point to access Cisco 1524 down has a location around the week of April 15.  This access point is in a very remote place and is very rarely used so I did not have to examine the problem until about a month later.  It turns out that the Cat5 cable was damaged in an act of vandalism and the AP returned to the top after I solved the problem of cable.

  An investigation is underway and I wish I could say the detective the exact moment wherever the AP first reported down to the WCS.  I know that the alarm was there as I just never took the time to record the date and time.

  When I go to the alarms it go far enough to see when this happened.  Is - this information stored anywhere so I can pull a report and see the date and time of the AP are down?  I have searched and searched the boat launch of the report, but for the life of me, I can't find this information.

  I have the version 6.0.132.0 of the WCS.

  Thanks for any help that can be provided.

  Bucky

  Bucky,

  WCS logs have a finite number of alarms, they can store. If the event is more listed, then he was in and there is no way to recover this message alarm to see exactly when it was generated.

  Sorry...

  Lee

• Need help to retrieve the password for user account Windows 8.

  I need help!

  I have configured my windows 8 "admin" or "user account" password for over a year now and I don't remember what it is. I tried to download a new antivirus on the computer software but it takes the administrators password to make changes to this laptop.

  How can I know what is this password and how do I solve the problem in order to be able to install new software?

  Thanks in advance

  Josh

  Hello

  "What to do if you forget your password Windows 8/8.1"

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  If you have forgotten your Windows password, there are several ways to recover or reset:

  • If your PC is on a domain, your system administrator must reset your password.

  • If you use a Microsoft account, you can reset your password online. For more information, see the Web to reset your password page.

  • If you use a local account, use your index of password as a reminder.

  If you've tried these suggestions and still unable to connect:

  • If you have Windows 8.1, you will need to reinstall Windows.

  • If you have Windows RT 8.1, you will need to contact the manufacturer of your PC.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Need help with SQL/PL/SQL for Dates

  Hi Experts - need help with a SQL query.

  I need to insert some date fields in a table called CALENDAR_PERIOD.

  Current data in CALENDAR_PERIOD table with their data types:

  STARTPERIOD (DATE) YEAR (NUMBER) PERIOD_LABEL (Varchar2 255)

  02/11/2014 2014 2014/02/11 SUN

  03/11/2014 2014 14/03/11 MON

  04/11/2014 2014 11/04/14 MAR

  I have to increment above values up to the year 2025. I don't know how to write SQL and increment of these values.

  Ex: My next value should insert: 05/11/2015 2014 11/05/14 WED like that I need to insert data until 12 31, 2025.

  Can you please help me with PL/SQL block?

  Really appreciate your help!

  DB version:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Thank you
  Sandy

  Hello Sandy,

  Maybe something like

  INSERT INTO calendar_period (startperiod, year, period_label)

  SELECT DATE '' 2014-11-04 + LEVEL

  , TO_NUMBER (TO_CHAR (DATE '' 2014-11-04 + LEVEL, "YYYY"))

  , TO_CHAR (DATE '' 2014-11-04 + LEVEL, "MM/DD/YY DY")

  OF the double

  CONNECT BY LEVEL<= date="" '2025-12-314="" -="" date="">

  ;

  ((mais je ne comprends pas pourquoi nous créons une telle table "année" et "period_label" peuvent être calculé à partir de startperiod))

  Best regards

  Bruno Vroman.

• Need help to provide a page for the Oracle PeopleSoft HCM on internet

  Hello

  I need help to provide that a page of Oracle PeopleSoft HCM on internet for vacancies may be available for recruitment. How can I provide a Peoplesoft Web page?

  TKS

  Bruno will read

  Of Peoplebooks

  Access to external Sites

  External candidates, by definition, do not have the nicknames PeopleSoft. To allow external users access to a site, you put a link to the site on a location such as your public Web site. The site definition includes a field to set the URL of this external link.

  Deployed in this mode, the instance of PeopleSoft to be accessed by external users must have the appropriate security settings to allow users to bypass the access code. In other words, a user who clicks on the link is not presented with a PeopleSoft signon pages but is instead signed the using a user ID generic comments so that the user can be taken directly to the candidate Gateway.

  If an external candidate allows a more inactive candidate gateway session that the timeout you set, the default system behavior is to provide a link to the login page of PeopleSoft with the visible invited user ID.  According to your logic of password, the guest user ID might be locked if the applicant tries in vain to connect. For more security and ease of use, replace the code page to a page that displays an appropriate message.   For example, to display a message that the session has expired and provide a link back to the bridge of the candidate.

  Development of Sites

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• need help with a game to run

  I, m trying to run diablo 2 and the colors are all messed up. I ran in compatibility mode and changed my settings on 800 x 600 16 bits but the colors again mess up can help anyone?

  
  

  Thanks for the help

  
  

  Justin

  Hello

  Update the display driver.

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart