I need ITE8708 device for studio xps 13 pleasssseeeee

Similar Questions

• Upgrade GPU for Studio XPS 435MT and indine power load max

  Hi, I have a Studio XPS 435MT with a 360W power supply and an ati radeon HD4800 series GPUs (likely a 4850). I want to improve the gpu with a gpu from Gainward GeForce GTX 750 2 GB (one slot), GDDR5. It uses just 55W and there is no external power supply plug, the HD4800, but in the GTX card appears: minimum 300W or more system power supply (with a minimum of 12V current rating of 20A). And I do not know if this 20 a could be a problem, because my Delta DPS-360FB-1 diet doesn't seem to reach the rated current.

  What do you suggest me?

  Thank you

  combined maximum 12V 12VA and 12VB output for this unit is 300W which is 25, but you can't have your cake and eat it too.

  If you draw 20 amps on the 12v rail you used 240W leaving 60W for everything else that needs 12V.

  And if you use 300W on the 12v rail that leaves 60W max for the 5v / 3.3V through less 10W to + 5VSB.

  GTX 750 will be in this case either well, or it does not at all due to the lack of power on one or more tracks.

  HD4850 certainly consumes MORE energy than a GTX750 so that only one point of view, it should be good.

  

• Update graphics card for Studio XPS 8100 with 600W PSU

  Hello

  I just joined the forums of Dell and I was wondering if I could get help for choosing a new graphics card for my studio xps 8100.

  I just bought a power SUPPLY Corsair 600w PSU and was looking for a good graphics card for games (something which runs the games current and near future at the top or above), preferably between 70 and 100 pounds. I took a look at the Geforce GTX 650, and I think that the power supply 600w she'll be fine, but I wasn't sure whether she would be fit in my office. Any advice on the appropriateness of the GTX 650 will fit / work, or any recommendation of something better, would be great.

  See you soon

  Hello Oni21,

  My apologies for the delay in response and if was not clear in my previous post. I wanted to say before you buy the GTX650, take the computer to a local store and check if the graphics card works on the system.

  Please write again if you have any additional questions.

• Replace ST310005 28as SATA drive for Studio XPS 7100 with SSD (SATA III)

  The service for this computer label is the NOTE from the ADMIN: maintain the label removed by privacy policy >.  The current configuration is identical to the original configuration.  Based on performance monitor I'm connected drive.  I want to upgrade to SSD and also upgrade processor if possible.  Is it useful to upgrade?  Motherboard support Sata III?

  Thank you very much for your help!

  Here is a list of compatible processors.

  Your RAM can be upgraded to four 4 GB modules.

• Bluetooth does not work in Windows 8.1 for Studio XPS 1645

  I've updated to windows 8.1 and Bluetooth had mysteriously disappeared. When I try and install my old drivers win7, it happens with compatibility issues, even if I set compatibility Vista, xp or 7.

  I have the same problem and solved with this driver. It works to win 10 on my DELL XPS 1645 - Dell Wireless 370 Bluetooth Mini-card.

  http://support.Lenovo.com/us/en/downloads/ds031999

• What processor can I go to for studio xps 7100.

  What is the fastest I can put in?  I guess that the 1090 t that I saw that some 7100 is sold with?   Not the 1100t even if I guess?

  Is there any documentation on this?

  Thank you.

  CooloutAC

  Ah ok tks Mustapha.  in order to do not the 1090 t?  could of juror that I saw a sold 7100 with it.  and tks Bev I'll make sure to do so.

   
  CooloutAC
   
  It was sold with the AMD Phenom II X 6 1090 t., see here: -.
   
   http://en.community.Dell.com/what-do-i-buy/for_home/f/4510/p/19430008/20026793.aspx#20026793
   
  Bev.
   
   
   

• Studio XPS 8100 - (Best Buy Version) bought end of 2010 4 GB DDR3 Ram problems 1333Ghz

  Greetings,

  I bought a Studio XPS 8100 in late 2010 at a Best Buy store. It came with 4 cylinders of 2GB 1066Ghz (each cylinder), adding up to a total of 8GB spread on 4Slots, all of a sudden one of the slot (Slot 2 to be precise) Ram began to fail, so computer would beep to reveal no ram or sometimes ram write failure etc. So, to avoid problems with this slot (Slot 2), I got rid of all four locations of 2 GB and wanted to replace them with the following ram: "(Kingston HyperX FURY 4 GB 1333 MHz DDR3 CL9 DIMM quantité = 2 d'ajouter jusqu'à 8Go en Kit) ', but my computer is beeping not revealing no ram detected." Now, according to the Studio XPS manual, the configuration can be either Ghz 1066 or 1333 Ghz as long ram DDR3 of Ram.

  I would like to know why my new 8 GB kit (2x4gb 1333 Ghz) does not work with my computer Studio XPS 8100? RAM is correctly inserted on the slot 1 and 3 (I even tried different slot combinations).

  It would be a great help if you guys can let me know what DDR3 1333 Ghz Ram is compatible with my Studio XPS 8100.

  Thank you!

  I contact Kingston technical support and get their help.

  I think the chipset on the studio XPS 8100 is H57.

  H57 is not listed as a compatible chipset on the webpage the HyperX fury.

  http://www.Kingston.com/us/HyperX/memory/fury

  Could it be the timing or Sub timings and memory density or...

  Kingston has maybe a different kit that will work and they can exchange.

  or return it and check the crucial.

  http://www.crucial.com/USA/en/compatible-upgrade-for//Studio-XPS-8100

• Options for replacement card mother Studio XPS 9100

  I love my Studio XPS 9100. I have a lot of its components updated to try to keep up to date, but he is past his Prime and needs to be modernized. Are there replacement motherboards will be that adapts well in the case of Studio XPS 9100? If so, any suggestions for a nice high-end replacement? Thank you! Kent

  No there is no replacement.  This is a non-standard façade as well as several other control cables.

• DRIVERS NEEDED 3D VIDEO CONTROLLER, BLUETOOTH, PCI DEVICE for HP 15-r033tx

  I am unable to find the video controller 3D, Bluetooth and device for HP 15-r033tx PCI controller. Can someone please provide the links.

  Hello:

  First install the Intel chipset driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-130504-1 & cc = us & dlc = en & lc = fr...

  Then, install the Intel HD graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-134230-1 & cc = us & dlc = en & lc = fr...

  Then, install the graphics driver nVidia and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-130198-1 & cc = us & dlc = en & lc = fr...

  Alternatively, you can find the rest of the W7 x 64 drivers and the software you need at the link below...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategor y? cc = us & dlc = en & lc = en & os = 4063 & product = 7308900 & softw...

  The PCI dev needs this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140783-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7308901&sw_lang=

  Bluetooth needs this driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• I need the fix for win Xp Sp2 can install the HD Audio Device codec

  I need the fix for win Xp Sp2 can install the HD Audio Device codec!

  I has this fix and I lost it...

  It is contains (patch 3)

  can u please help me and give me the link of this hotfix

  Could be the fix. Looks like he helped other people with the same device.

  http://support.Microsoft.com/kb/888111

  If this isn't the case, I can continue to dig.

• I need a device driver for this printer by Ricoh mp161l

  I need a device driver for this printer by Ricoh

  The hardware manufacturer is the only scource of drivers for their hardware

• Need to get the bluetooth works on Dell Studio xps 1640 after upgrade to Windows 8

  I upgraded my Dell Studio xps 1640 to Windows 8. Since then, I've never used Bluetooth, I was not concerned that my bluetooth software was not compatible.  Now, I've found a use for Bluetooth and I can't update my driver because when I try to download the driver I get the error message no bluetooth is detected.  I know that Windows 8 turned off the Bluetooth because of the lack of compatibility, but now I find myself in an enigma. How to Bluetooth if it does not appear?

  YAA dude, I have encountered the same problems with my studio xps 16, tried many things.

  Well, you can try to download the new driver dell wireless bluetooth dell Web site 4.0 module, go to Alienware laptops and look for driver windows 8, will file with a name of "Comm_Broadcom_Win8_X04_A01__Setup-39W36_ZPE", about 170 MB.

  It worked on my Studio XPS...

  Concerning

  Sundeep

  
  http://www.Dell.com/support/drivers/in/en/indhs1/product/Alienware-M18x-R2?s=DHS

  a quick link for you, change to 64-bit windows 8, go to download and communication.

• Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?

  Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?

  Muse deals, each device uses the correct layout. You n ' to do anything, except to create the respective pages.

• How to get out "power save" for DELL studio XPS (VISTA)

  How you exit (escape) from the "energy saving" mode on a DELL studio XPS (VISTA)?

  Hello

  ·         What is the model number of the computer?

  ·         What is the exact error message?

  You can try pressing Fn + F8 and check if it works. You can also see these articles:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

• Add SSD to the Studio XPS 8100 with 2 HARD drive

  Hello

  I have a request similar to this one in this thread: http://en.community.dell.com/support-forums/disk-drives/f/3534/p/19499585/20334228.aspx#20334228 but I went a little lower on the line, need some advice and help on the Intel Rapid Storage Technology controller.

  I have a Dell Studio XPS 8100 with discs of Segate to 2 x 1 TB which have stripes.

  Configuration is SATA 1 + 2 = hard disks scratched; 3 = BluRay ROM/DVD RW SATA; SATA 4 = not used.

  I bought a Samsung SSD 840 series.

  What I want to do is add the new SSD controller and install Windows 8 without messing/breaking the existing 2 x HDD Striped Array.

  First, I installed the SSD SATA 4 and started Windows 8 to DVD but Windows 8 says it could not install on this disk because it is not bootable (SSD is not formatted/not partitioned right now but I guess that Windows 8 installation will do for me.

  If the questions are:

  (1) if I go the SSD SATA 1, could I (physically) move the existing striped 2 HDD SATA 2 and 3 and set this configuration in technology Intel Rapid Storage Technology controller without losing the striped table?  I don't want to find that the controller will set up a table of fees which then requires a fresh format in order to to use.

  (2) is there a documentation of this controller I could read on what concerns the reconfiguration/options and their effect?

  Thank you
  Chris

  I am pleased to learn that you have to work.  Sometimes I forget that the newer Dell BIOS will allow allows you to select a SATA port for the start.  My XPS 410, being an older machine, allows me only to the ability to choose 'SATA hard drive' as boot device.  Because it does not give me the option to choose a specific port, the bootable SATA drive must be attached to the first port.

  Once a RAID has been configured, the parametric data written to readers allow the RAID ROM figure out how the RAID has been configured.  I've been through all this on a Studio XPS 435 t/9000; We had a problem after adding a new video card in the system that caused startup failure, error message "one or more of your drives are locked".  We have solved by moving readers from the ports of third and fourth (or Dell originally installed them) to the ports of first and second.  Requirement to keep records in the same relative order of port, you can of course make this transition and maintain the operational computer.

  I wish that your installation does not end with an arrangement of dualboot on its own; Maybe Windows 8 works differently from Windows 7.  The XPS 410, I'm currently using is a RAID 0 which has been initially configured with Windows XP.  When I decided to try Windows 7, I has narrowed the original partition and run the Windows 7 Installer to install in the unallocated space resulting.  The installation went normally and I found myself with a system dual boot without ever having had the opportunity to indicate that I wanted a system dual boot.  Since it was my goal, I'm not complaining, but I see that it might be inconvenient for some people who had the intention like that.  Before installation, you accidentally set your SSD on port 4 to be the first in the boot order?