I need the date of the creation of my account
I used to check the date of creation on my profile, I can't find it anywhere.
How can I get the date of the creation of my account?
- Open Windows Explorer.
- Navigate to the c:\Users folder
- Use the drop-down display make visible the creation Date .
- Check your profile folder entry. The creation Date shows when you used your account first.
Tags: Windows
Similar Questions
-
Have a sum of accounts while others average w on the creation of new accounts
The relevant dimesnions of my cube are as follows:
Period
-Jan
-JanWeek1
-JanWeek2
-JanWeek3
-JanWeek4
-JanWeek5
Account
-Staff
-Revenue
Entity
-Region1
-Loc1111
-Loc2222
-Loc3333
(1) what should I do differently so that at the level of the period "Jan", my strength would show that the average 5 weeks, but my income would show that the sum of 5 weeks? I can do this withiing the properties of the accounts or should I just create new accounts of calculated for each that do the math?
(2) also - in particular where I am looking for the average - how can I set it so thet when there are 4 weeks only populated will know enough simply divide by 4 and not 5?
(3) Finally, I also have a few accounts where I want the value of "Jan" populated... last week what's the trick?
Thank you very much in advance for any guidance.
I downloaded these 5 days each week for each location (it's perhaps part of my problem?).
So that's what I would like to see followed by what I see:
Get the presentations a day for Loc1111 for JanWK1 = 10 (that'S RIGHT, TAKE 50/5)
Retrieve presentations per day for Loc1111 for Jan = 10 (it IS to RIGHT IN TAKING 250/25)
Retrieve presentations per day for the region1 for JanWK1 = 10 (this IS BAD BECAUSE IT TAKES 150/15, I NEED about HER to TAKE 150/5 (ignoring the days added up))
Retrieve presentations per day for the region1 for Jan = 10 (it IS FALSE BECAUSE IT TAKES (3 * 50 * 5) /(3*5*5), I NEED TO TAKE (3 * 50 * 5) /(5*5) = 30)
Appreciate any guidance! Thank you
Published by: 800195 on May 12, 2011 11:00Hi again! Looks like the feature "Balance time" classic. I don't have the time to write a complete answer at this minute, but you should be able to get the idea of this section of the SER60: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_dbag/frameset.htm?dcatimse.htm
-
Username or password incorrect after the creation of new account, tried everything
I deleted the old email account and did it again. Thunderbird has created the account e-mail address, but when I try to use it, I get the message 'User name' or incorrect password I can access the email on the site ok, so the login ISP account and password are correct.
I turned off the pc and restarted, same problem.
Help really appreciated.
Concerning
DrachsiI thank very you much for your help and your support, that solved the problem. Everything is very complicated.
I really appreciate your help with the translation, you deserve 5 stars for support.
Concerning
Drachsi -
Transfer the root/agent DPS account
When you save the DPS, the first account created by Adobe to manage everything, including the creation of admin accounts using my e-mail address.
I created another account [email protected] and I would like to transfer the root/agent to this email account, because I'm going to leave the company and my email is destroyed.
Is this possible?
This can be done by connecting with the existing Adobe on Adobe.com ID, change the account settings to use the new email address. However, if this new email address is already associated with a different Adobe ID, it can not be used. So you have to start somewhere in the chain and change the email to a valid email is not currently associated with an Adobe ID, then release you from the previous e-mail address to use in another account Adobe ID. Hope it makes sense. The important thing to understand is that there is a unique ID that lives under the address you use. You can change the e-mail to any e-mail address not used and the underlying unique ID (GUID) remains the same.
-
I have different PHP files in different folders. I want to organize them by Date of creation. But I need to change the creation date in some cases. Can I do this?
I select a file and the file > read > creation:
but I can't change that here. Is it possible to change the date in "Create."
The date of creation of a file cannot be changed.
-
Convert data in hierarchal of hierarchical data for the creation of the tree
Hi guys,.
I tried to figure this out for about two days together now and I'm still stuck and I see no possible solution that does not involve a new creation of the table.
I want to create a tree to navigate through projects and tasks, I use the demo "Task Manager" app, which I customized it a bit to fit my needs.
Basically, I can't create the tree because the relationship between projects and tasks is not a hierarchical relationship, it's a relationship 1: n like this:
__Projects__
ID (PK)
PROJECT NAME
___Tasks___
ID (PK)
Project (done FK reference Projects.ID)
So what I have to do is to "force" this relationship 1: n with a hierarchical relationship by creating a query (view) that links the two tables into one and have 2 columns, I can use as ID and PARENT_ID for the creation of the tree.
This is the data model:
CREATE TABLE 'EBA_TASK_PROJECTS '.
(NUMBER OF 'ID',
'PROJECT_NAME' VARCHAR2 (255),
"CREATED_ON" DATE NOT NULL ACTIVATE.
'CREATED_BY' VARCHAR2 (255) NULL NOT ACTIVATE.
DATE OF THE "UPDATED_ON"
"UPDATED_BY' VARCHAR2 (255),
'FLEX_01' VARCHAR2 (4000).
'FLEX_02' VARCHAR2 (4000).
'FLEX_03' VARCHAR2 (4000).
'FLEX_04' VARCHAR2 (4000).
'FLEX_05' VARCHAR2 (4000).
NUMBER OF "PARENT_ID"
VARCHAR2 (1) 'IS_ACTIVE ',.
VARCHAR2 (4000) "DESCRIPTION."
CONSTRAINT CHECK of 'EBA_TASK_PROJECTS_ACTIVE_CC' (in is_active ('Y', 'n')) ENABLE,.
ENABLE 'EBA_TASK_PROJECTS_PK' CONSTRAINT PRIMARY KEY ('ID')
) ; ALTER TABLE 'EBA_TASK_PROJECTS' ADD 'EBA_TASK_PROJECTS_FK' OF CONSTRAINT FOREIGN KEY ('PARENT_ID')
REFERENCES 'EBA_TASK_PROJECTS' ('ID') ON DELETE CASCADE ACTIVE;
CREATE TABLE 'EBA_TASK_TASKS '.
(SELECT 'ID' NUMBER NOT NULL,)
ACTIVATE THE "PROJECT" NUMBER NOT NULL,
ACTIVATE THE "TASK_PRIORITY" VARCHAR2 (400) NOT NULL,
ACTIVATE THE "TASK_DIFFICULTY" VARCHAR2 (400) NOT NULL,
ACTIVATE THE "TASKNAME" VARCHAR2 (4000) NOT NULL,
VARCHAR2 (4000) "TASK_DETAILS."
"CREATED_ON" DATE NOT NULL ACTIVATE.
DATE 'DONE ',.
ACTIVATE THE 'CREATED_BY' VARCHAR2 (400) NOT NULL,
'STATUS' VARCHAR2 (4000).
DATE OF THE "UPDATED_ON"
"ON THE ROAD" DATE.
NUMBER OF "TASK_PREDEFINED_ID."
"UPDATED_BY' VARCHAR2 (255),
ACTIVATE THE "USER_NAME" VARCHAR2 (255) NOT NULL,
'FLEX_01' VARCHAR2 (4000).
'FLEX_02' VARCHAR2 (4000).
'FLEX_03' VARCHAR2 (4000).
'FLEX_04' VARCHAR2 (4000).
'FLEX_05' VARCHAR2 (4000).
NUMBER OF "PERCENTAGE."
ENABLE 'EBA_TASK_TASKS_PK' CONSTRAINT PRIMARY KEY ('ID')
) ; ALTER TABLE 'EBA_TASK_TASKS' ADD 'EBA_TASK_TASKS_PROJECTS_FK' OF CONSTRAINT FOREIGN KEY ('PROJECT')
REFERENCES 'EBA_TASK_PROJECTS' ('ID') ON DELETE CASCADE ACTIVE;
I use APEX4.0
It's good enough that this guy, hope you can help me with this. I'm really stuck on this and I'm about to give up.Hello
So what I have to do is to "force" this relationship 1: n with a hierarchical relationship by creating a query (view) that links the two tables into one and have 2 columns, I can use as ID and PARENT_ID for the creation of the tree.
I'd say you need a UNION rather than a JOIN.
Something like:WITH project_task_view AS ( SELECT 'P'||to_char(id) as id , null as parent_id , project_name as node_name FROM eba_task_projects UNION ALL SELECT 'T'||to_char(id) , 'P'||to_char(project_id) , task_name FROM eba_task_tasks ) SELECT id, parent_id, node_name, level FROM project_task_view START WITH parent_id IS NULL CONNECT BY PRIOR id = parent_id ;
-
where the hell is the creation date?
Hi all
I arrived at the end of my (not very extended in any case) Wit...
I export jpeg taken with cameras such as the Coolpix 900 devices and 995 acient.
Of course, LR 4 does not write capture dates, so I started to investigate what was going on.
So here's the situation:
1. I see the dates of capture in LR left upper gallery above the image (i button) but
2. no capture was on panels of metadata to the right, and
3. no date capture when the original for opening files is with the viewer online Exifviewer or Jeffrey.
???
Where LR becomes the capture date of?
And then I get these and put them somewhere for export?
Later, I would like to use the dates of capture as part of the exported jpeg names (using A Better Finder attributes or any equivalent of PC)
Can someone help me please!
Mike
LR 3 and 4 are buggy during the manipulation of images which the metadata do not capture dates (EXIF:DateTimeOriginal). For these files, the time shown next to the image of the library is not the date of capture - this is the creation date of the file (such as defined by Windows or Mac OS).
In order to obtain a date of capture, stored in the original file or the exported versions, you will need to give the command Medata > change the Capture time. Often, everything you need to do is select all the photos that do not have the time, do change the Capture time and then click all change a capture, and the pictures will now have their capture time adjusted to the time of the file last modification time. However, I strongly recommend that you take a backup of these pictures first, because changing the Capture time can not be undone in LR.
See this topic for your comments for further information:
-
If you go to Page Setup in Firefox, the option for the footer is the date and/or time of output. I don't want today's date that its print, but would rather than the Date of the creation of this web session saved as it is important to display this information with a legal matter. The research that has been done on a computer is out of date of creation down instead. I know that I could add the date by using the custom field for a footer in the Page options but prefer automated sound somehow when you print to a PDF (CutePDF). Please let me know.
Thank you
You might be able to automate this process if you open your PDFs with Adobe Acrobat Pro and make sure that the PDF file has a date of receipt:
Idea of *http://smallbusiness.chron.com/print-date-time-stamps-pdf-55986.htm... -
Hello
I need the date of the life cycle (or end of Support) to HPLJ printer M6 - model M605n.
Where is the best location / # to find the dates of the cycle of life for HP products?
Hello
You can contact HP for the info.
Best regards
Mike G
-
Export videos without losing the creation date
In pictures 1.0.1 I am trying to export worth several years of videos to put on an external hard drive to save space on my main machine, but when I export them (via drag + drop on the desktop), they lose their date of creation - and, therefore, their context. They have different types of files, but a digital SLR, the iphones and old camcorders.
I found more questions concerning the pictures, where the creation date is stored in the EXIF data for the photo, but I can't find similar data for these videos using "Get Info" or Inspector of QT movie.
Any help would be appreciated.
Thank you!
export the unmodified original
Videos have no EXIF data - only photos have EXIF/IPTC data - https://en.wikipedia.org/wiki/Exchangeable_image_file_format
LN
-
My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp
Hi Adel Bushager,
I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.
Hope this information is useful.
-
need the simple way to set the computer back to factory settings, and already saved safe data
need the simple way to set the computer back to factory settings, and already saved safe data
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
-
Oracle will consider the creation of a day 2 hands on the documentation for Data Guard?
Hello
Oracle will consider the creation of a documentation of son of hands 2 day for Data Guard?
There is already an OTN 2 day of CARS and performance tuning documentation.
Thank you
Updated - she sent the link to this topic for the Product Manager Data Guard. As a result, Oracle may or may not consider creating 2 days hands on Data Guard documentation, but no doubt they consider at least considering creation day 2 hands on the Data Guard documentation.
-
Adobe prelude ingest the creation Date changes
I'm having a problem with Adobe prelude. I shot some interviews last weekend and tried the app iPad prelude Live Logger to construct markers in real time during interviews. I have been very wary of the camera (5Diii) and iPad to exact date/time/time zone schedule.
I expected it would be easy as a prelude to import the identifier "metadata" iPad newspaper, but I discovered prelude bad reads the file creation Date. In fact, I have no idea where he is at the time of creation of.
Here's what Finder is properly showing the creation date of the file:
But the same clip in prelude shows this:
As you can see, good day, wrong time!
And the error I get when trying to apply this .xmp file Logger live to the clip wrote "the marker... from the associated metadata Panel isn't in the fury of time of the clip... and cannot be added". Which I suppose is because prelude read the bad weather!
Any ideas?
Andy Brown
Adobe prelude 2015.0 CC
4.0.0 (version 138)
OS X 10.10.4
Hi Andyb,
Thanks to accentuate the problem.
I confirmed that prelude does not display the correct values for created/modified Date/time.
I refer to the question within my team. We will probably address this issue.
Customer feedback is important to us. continue to write in the case of any confusion.
Thank you
Mayjain
-
(1) can a notification after the creation of the virtual machine to a person or a specific group?
(2) during the creation of VM., can an end date being specified with regard to long the virtual machine would be required for?
Hello
There are two of them:
(1) use the workflow of "notification" of the library-> just Mail and build a group (comma seperated or e-mail, Distributor)
(2) you can program it or build a timer on hold until the date is reached
Hope this helps
Christian
Maybe you are looking for
-
How to remove my ifone id icloud
my iphone has the ID of a person. and also the icloud IDS. How can I delete / remove this ID. Note: I don't have a password of this ID I have buy the iphone from the local market, which have the ID of a person
-
Hello After replacing a failed hard drive and firmware updagrded, I want to download media, my plotter keeps coming up with code system error and warning: "0f0100 00001d 06 on/off switch, if the problem is, contact HP support. I did several times of
-
Afraid to throw old computer with information on this subject.
-
original title: VISTA recovery problem. I'm in a situation where I could make only a single recovery of 3 DVDs and now, by mistake, I formatted my PC using this disc. After that when I start my PC with recovery disc, it is not able to detect any oper
-
Problems connecting to the internet using the wireless network connection
I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give a