I need the specifications for the replacement of hard disk, sata 2, sata 3, 3gbs or 6gbs hybryd or SDS.

Similar Questions

• Error Code C800044E cannot get Microsoft Updates more since the replacement of hard disk

  I am not able to update and the following error: code 800044E C

  Can someone help me? I'm using Vista Home premium.  I was able to upgrade windows until I just replace my hard drive with a new drive cloned.  I used PC-cillin antivirus for 2 years.  Thank you!

  see if this helps:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2011 - Update Services

• cd/dvd missing after the replacement of hard disk and windows drive

  I have a laptop Lenovo I had to replace a hard drive, and Windows 7.  I've been able to do and got going, or so I thought.  I went to use the cd/dvd drive and nothing.  Looking at the Panel control does not show a d: / at all.  Device Manager shows a drive. (I think)  He said same drive works fine on the Properties screen.

  Any ideas on how to get it working or back?  Or should I go to ebay and get an external hard drive?

  Thank you, in advance, for any help.

  PJ

  Hello

  To isolate your concern about the CD/DVD player, is there an error message you get? Have you tried other CD or DVD?

  We also try to make the troubleshooting steps below on how to use the hardware and peripheral troubleshooting tool:

  1. Press the logo Windows + R to open the run dialog box.
  2. Control type in the run dialog box, and then press ENTER.
  3. In the Search box in Control Panel, type troubleshooting and then click Troubleshooting.
  4. Under the material and audio item, click Configure a device. If you are prompted to enter a password or provide confirmation, type the password or provide confirmation.

  If your problem is not resolved, please see this link for additional troubleshooting steps.

  Keep us updated.

  Kind regards.

• Add/Remove Programs does not locate all my programs installed after the replacement of hard disk

  I recently had to replace the hard drive of my laptop.  We have cloned the original on the new hard drive.  The programs are all visible in Windows Explorer in the directory program files.  However, they are in the utility "Add/Remove Programs".  I can't open the program in exe files.  I am told by the manufacturer of software, in one case, I need to uninstall the program and reinstall it.  I can't uninstall it without the Add/Remove utility (or can I?)  Thanks for your comments

  Try to reinstall the program without uninstalling. Boulder computer Maven
  Most Microsoft Valuable Professional

• Since the replacement of hard disk, get the message that says SHDOCVW.dll is missing

  Original title: HELP! PLZ!

  I have a computer dell laptop which has xp on it... the hard drive has been replaced, and when I connect it says that the SHDOCVW.dll is not found... Help!

  What I wanted was that the "solution" proposed by Don Patterson would require you to have a genuine Microsoft Windows XP installation CD.  And more, if you had such a CD, when you run the "sfc/scannow" command, even if it replaced the missing file (and I don't think that, because the file is not corrupted and missing), replace it with a very old version.

  If you want to try something, you can download the version of SHDOCVW. DLL of my Windows SkyDrive.  Click here--> https://skydrive.live.com/redir.aspx?cid=18b259158254905b&resid=18B259158254905B! 223 & Thierry = 18B259158254905B! 214 & authkey =! AO-HIAqXqBXVd0w

  If you do not download the file, put it in C:\Windows\system32 and also put a copy in C:\Windows\system32\dllcache

• I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I'm not able to activate Home premium Windows 7 please guide me

  I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I am not able to install or upgrade Home premium Windows 7

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows Boot Manager, I want to change the Configuration of hard disk

  I have a computer with two former 500 GB Hard Drives.  The "Legacy" operating system is installed on the first physical hard disk in the system and Windows 7 is installed on the second physical hard disk, they are the identical WD drives.  I bought a new Seagate Barracuda 1000 GB drive, I want to use in place of the mark.

  So currently I have:

  SATA-0, score 0: Legacy 500 GB OS

  SATA-5, score 0: 500 GB Windows 7

  With the new player, I want to:

  SATA-0, score 0: Legacy 500 GB OS

  SATA-0, Partition 1: 500 GB Windows 7

  I have disk imaging software, able to copy both disks to the new partitions on the new disk.  What I want to know is how can ensure me that I continue to get the start menu to see the two operating systems.

  Of course, I will still have the old hard disks available, and I can always put them in.  It's just that the cloning process takes a long time, and I would like to have my procedure in advance.  The first time I have start the system with the 1 TB drive, it will not be a disk of 500 Go SATA-5, score 0: in the computer.  I don't know which files must be modified to search for Windows 7 in the new location.

  I shouldn't need to do a reinstall of windows.  I think I found the answer to what I was looking elsewhere.

  I remember that two years ago, when I set up the Dual boot system, I followed these instructions:

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  When I did, I had a dual boot menu:

  -Old Version of Windows

  -Windows 7 Professional

  Of course I meant "Windows XP" rather than "earlier Version of Windows.  I searched and found that a tool exists to modify this menu.  I don't remember what they called the tool when I presented this request.  I was pretty sure that the tool would allow me to have the change of start menu where he sought the installation of Windows7.

  Today, I found the name of the tool, it is called BCDEDIT. EXE.  It allows you to safely edit the menu file, and startup locations resemble the old file boot.ini of Windows NT days.  Here's what the tool then generates on the command line.

  Windows Boot Manager
  --------------------
  identifier {bootmgr}
  Device partition = D:
  Description Windows Boot Manager
  settings regional en-US
  inherit {globalsettings}
  default {current}
  RESUMEOBJECT {a68ca6ef-27a1-11e3-bc5b-844b6ef301be}
  displayorder {ntldr}
  {current}
  toolsdisplayorder {memdiag}
  timeout 8 / / used to be '30'

  Windows Legacy operating system loader
  ------------------------
  identifier {ntldr}
  Device partition = D:
  path \ntldr
  Description Windows XP / / used to be "Earlier Version of Windows"

  Windows boot loader
  -------------------
  identifier {current}
  Device partition = C:
  path \Windows\system32\winload.exe
  Description of Windows 7
  settings regional en-US
  inherit {bootloadersettings}
  recoverysequence {a68ca6f1-27a1-11e3-bc5b-844b6ef301be}
  recoveryenabled Yes
  OSDEVICE partition = C:
  SystemRoot \Windows
  RESUMEOBJECT {a68ca6ef-27a1-11e3-bc5b-844b6ef301be}
  NX OptIn

  I have foound good information about this tool on:

  http://www.nextofwindows.com/

• Using the service 'Release hard disk': some pictures of stay in "Update the Photos to reissue", even if I publish it

  Hello

  First of all please excuse my bad English. [I am french :-)]

  I have 2 different problems with pictures in smart albums used in a service of "Publish on hard drive" [Publication of the Service of hard disk] :

  -some of them stay in the section "Updating the Photos to republish" ['Changed to republish photos'] even when I publish it. The published photo is created and saved on my hard drive, but the picture goes to the section "Published photos" [published Photos by] for a second and then go back to the section "update the Photos to republish. To move back then in 'Published Photo', I need to use the "mark as up to date" [mark as updated] option in the right click menu.

  d ' other hand, some ot them (maybe the same) are still stuck in the section 'photos Publised' even if I do some changes (adding keyword, change some options of development...).

  Can I have some help please?

  Fabien.

  I had the same problem and I found the solution here: Lightroom CC 2015, error Publishing Services

  -Terje

• How to check the type of hard disk of the windows operating system?

  on linux, we can find the hdd for example of name setail

  Type a - ide

  SDA - ACHI or sata or sas

  a way to find the type of hard disk in the windows operating system? as linux

  any command or something

  In Windows 7, you can get a lot of details by selecting Start, all programs, accessories, System Tools, system information, components, storage disks. It was very similar to Windows XP, but for all information users tend to use Everest or Belarc Advisor for additional information not available. Everest has been best Bellarc advice but they ceased to offer tan updated free version. However, the 2.20 version is always available from third-party sites.
  http://www.Softpedia.com/get/system/system-info/Everest-Home-Edition.shtml

• Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  I replaced a hard drive crashed and restored the original Vista 32bits.  I have the product key for the upgrade of Windows 7 that I bought a year or two ago.  I now need to find the download for my relocation (without paying again).  Where should I go for the download?

  If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• installation and replacement of hard disk in the computer hp mini 110

  I need help replacing a hard drive on my computer hp mini 110.

  HP Mini 110

  Windows XP sp3

  I just posted a question about the installation of the operating system.  Fixed that issue but found another.  I installed the operating system and everything was fine.  I started to install the drivers and applications, and after you have installed hp applications the pc has restarted and came up with a message saying:

  PRI Master Hard Disk: S.M.A.R.T. Status BAD, Backup and replace, press F1 to resume.

  PRI Master: WDC WD1600BEVT-60ZCT1 13.01A13 ULTRA DMA MODE 5 S.M.A.R.T. Capable and BAD Status

  I press F1 and it started.  I was still a few drivers requiring an installation.  Since I've installed just everything, there was not much to save.

  I installed a different driver and rebooted and this time I hit F1 it didn't start.  I got a black page with a line of blinking cursor and nothing else happens.

  After some research, I've seen it's a bad hard drive.

  My question is:

  Is this something that can be replaced at home.  I can read the instructions.  What I need to get the same hard drive, or are there others that will work?  If I can do it at home, where can I find instructions to replace it and what is the best place to get the hard drive.  Is this what I need to know.

  Thanks for anyone's help.  I'm sure I look like an idiot, but it's something I've not done in a laptop.  I replaced and internal hard drive in a desktop computer.  I remember myself set to land and out and plug in another.  I had the chance then because the computer had 2 hard drives.

  I guess I'll need to reformat the drive and start over again with the installation of the operating system etc.

  Would I be able to upgrade and install vista or windows 7?

  Any help is appreciated.

  Hi, Tamara:

  Here is the link to the service manual for your laptop, which also lets you complete the You-Tube video.

  http://h10032.www1.HP.com/CTG/manual/c01895806.PDF

  You can buy a 2.5 "laptop hard drive size 160 GB SATA II, should not exceed 500 GB.

  You can get a 5 400 rpm model or a model of 7 200 RPM.

  The difference between the two is that you will get better performance (faster seek times) a disc of 7 200 RPM.

  However, it will be at the expense of the life of the battery between charges.

  So, what you choose, it's up to you.

  Here is a link to a site that sells hard drives of laptop.

  They have great prices and there are a lot of feedback from customers that may be useful for you to decide which one to go with.

  http://www.Newegg.com/store/subcategory.aspx?subcategory=380&name=laptop-hard-drives

  According to specifications, your computer can run Windows 7 well.

  I recommend edit you your message and remove any reference to the discussion of smuggling copies of Windows 7. These assignments are not in accordance with the rules of the forum.

  In addition, please keep in mind that a lot of these free copies of Windows can be loaded with traps that can steal your personal data and do other nasty things, including perhaps turn your PC into a Bot who committed illegal activities.  It is not worth it for me to install such illegally of is software and possibly have the bust of the FBI to the bottom of my door and arrest me for something that I didn't know that was going on with my PC.

  It seems that the recovery XP disks are available for your PC, even if the link is broken, so if you want to reinstall XP, contact HP by telephone and you can get a set for less than $20.00.

  Otherwise, you can get a game online site for $27.00 + shipping costs.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=13408

  You get a legitimate copy of Windows OEM 7 (relatively) cheap at the link below.

  http://www.Newegg.com/product/product.aspx?item=N82E16832116983

  Or you can pay double that and get the commercial version, which you can transfer to another PC. With the OEM edition, you can only use it once.

  http://www.Newegg.com/product/product.aspx?item=N82E16832116716

  Paul

• HP ENVY 14 2020NR: need a recommendation for a replacement hard drive

  Greetings,

  I have an a HP ENVY 14 2020NR with a hard drive died. Blue several screens before the new year, did a complete system restore, which seemed to have fixed things. Unfortunately, after 10 days the blue screens are back. The unit is several years old, and my next step is to replace the hard drive. I have all the data backed up elsewhere and ready DVD restore disc.

  Here are the specs of the drive:

  Hitachi disc HARD 7 K 750-750. P/N H2T7501672S.

  I am trying to identify the right replacement hard drive. Looks like it was 750 GB at 7200 RPM. Some choice out there. Can anyone recommend the correct replacement hard drive?

  Thanks in advance!

  DaniBoy

  Based on the laptop HP ENVY 14 - Maintenance Service Guide, it seems that your computer supports the following readers and more.

  6.35 cm (2.5 in) hard drives (HD) and the SSDS (SSD), 9.5 mm (. 37-in) and thicknesses of 7.0 mm (. 28 - in)
  Customer-accessible
  Serial ATA
  Supports the following hard disk configurations:
  ● 750 GB (7200 RPM)
  ● 640 GB (7200 RPM)
  ● 500 GB (7200 RPM)
  ● 320 GB (7200 RPM)

  Supports the following simple SSD drive configurations:
  ● 128 GB mSATA,
  ● 80 GB, mSATA
  ● 160 GB, SATA

  According to the above information, any hard disk 2.5 "SATA or SSD of 9.5 mm and 7.0 mm profile should work fine. This includes the newer readers who are more capacious.

  Please see Newegg - internal laptop hard drivesfor a few recommendations of HDD and Newegg - internal SSD for a certain number of decent SSD.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Cannot access the PX1396E external HARD disk

  Just bought this external hard drive 1 TB.
  I Plug and Windows (xp) it detects and installs the drivers, or something.

  When I click on it for the Explorer, it says please insert disk into drive X.
  I plugged on 3 computers in different and same problem.

  I tried looking for specific drivers, but it doesn't seem to be any, not even in the toshiba Web site.
  What's up, anyone know?

  Thank you.

  Hello!

  > but is not recognized PPP
  Can you please explain this? It is unclear to me.

  But if the disc external HARD only on a laptop computer does not contact the other laptop manufacturing. Maybe the chipset driver needs to be updated or it s mainboard issue.

  As floh_1 said, you can try another cable. It s worth a try! ;)

  Good bye

• The user of the 21 Tap hard disk is replaceable?

  Anyone know if the hard drive in the Tap 21 replaceable by the user?

  I see 21 Tap has been released and he is seriously considering.  But I can't tell by images or any document, if the hard drive is replaceable by the user or not. Actually in the pictures I see even any way that a user would open a part any Tap 21 at all.

  I would be VERY hesitant to buy a PC with a hard disk without the possibility to replace that hard drive myself if it is crushed or upgrading to a bigger in the future. To send a PC into a service center for several days for an easily manipulated hard drive failure or upgrade would be extremely boring, to say the least.

  I know that it was possible within 20 Tap, and it's obvious from the pictures of 20 as part of the back can be removed.  But the tap of 21 is a completely smooth piece, so there is no obvious way to get hard disk that I see.

  Thank you.

  Thanks NickT.

  I was hoping that wasn't the case, as the Tap 21 fits my needs very well.  I now just have to decide if it's a deal breaker for me, or outweighs the fact that it fits my needs so well that negative.

  I'll take some time to meditate... while I'm waiting for some clients out.  Then I hope one or several exams will help me make my decision.

• Satellite A300-247 cannot find the folder of HARD disk recovery

  Hello
  I tried to reinstall my Vista home premium on my Satellite A300-247. I have buit - in the OS. I did it axactly according to manual (reboot - F8 - repair your computer-...) When I clicked on Toshiba HDD recovery system recovery tools wrote me this:

  "the recovery of the operating system is impossible
  File recovery HARD drive on the second disc of the first hard drive not found.
  There is no environment recovery valid HARD drive on this computer. "

  I would like to ask what do I do reistall my OS. I have no disk with OS and backup disc creation tool does not work.
  Y at - it an option to get my OS on DVD from Microsoft or Toshiba?
  If I use this tool to reinstall the OS, I will loss all the information on the D drive (Vista is on the C drive)

  Thanks for the reply

  Hello

  Seems that drive HARD recovery does not work.
  Perhaps something has changed on the recovery of HARD drive partition or recovery files has been deleted

  Usually it s always advisable to create a recovery disk in a first time. This should be done at the beginning and this recovery disk is always useful if something would go wrong with drive recovery HARD or with HARD drive

  Now, you can't get the phone because you don t have this drive and the HARD drive does not work

  What to do?
  Well, I think that you would need new control disc.
  You can do so here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them