I need to install oracle on Oracle Linux R5 U7 R12.1.1

Similar Questions

• Install Oracle Linux 7 as a virtual machine in VmWare

  Hi all

  has anyone any information on how to install Oracle Linux 7 as a virtual machine in VmWare?

  Thank you and best regards.

  Take a look at: Oracle Linux 7

• Install Oracle Linux 6 update 2 in vmware fusion

  Then I looked around and it seems that there is a bug in the oracle linux distro that causes the screen to be cut in the installation program.

  The solution which is given anywhere is for vm workstation and go into the settings of the virtual machine, and configure the virtual machine display to have a screen at 1024 x 768.  Save the settings.

  However in vmware fusion 4.1 I don't seem to have that option.

  Does anyone know another solution for this?

  Thank you

  Mike

  Hi dalupus,

  The quick and easy solution is just use the keyboard... on most pages Installer, simply pressing enter move you to the next screen, even if there is no Next button visible.  If you change something on one of the pages of the Setup program, the Enter key may not work... In this case also, Alt-N should be is to click on the button "Next" invisible.  With my keyboard, it's the - N Option; You may need to adjust your keyboard and layout.  I can use this technique to make throughout the Oracle Linux 6 update 2 installation on Fusion here.  After restarting the virtual machine in the second stage of the installation, you will see at least the half top of the keys.  Once the operating system is configured and that you log the guest operating system, follow the instructions in KB to install the correct video driver in the comments.

  If you prefer to do the next button appear correctly from the start, you will need to change the configuration of your virtual machine file to include:

  SVGA. AutoDetect = "FALSE".

  svga.maxWidth = "1024".

  svga.maxHeight = "768".

  Make sure that you remove these two lines, once the client's video driver is set to day, otherwise, the virtual machine display stuck at 1024 x 768.

  I hope this helps!

  --

  Darius

• Need to install oracle client 11 GR 2

  Hi all
  
  I need to install the 32-bit oracle 11 GR 2 on a Linux client, in the oracle below download option are both related to linux.
  
  What is the link to 32-bit oracle software?
  
  Download Linux x 86      File 1, file 2 (2 GB) view all
  Download Linux x 86-64      File 1, file 2 (2 GB) view all
  
  
  Thank you

  Salvation;

  If your Os is 32-bit you need to use Linux download x 86 file 1, file 2 (2 GB) to see all the

  For any other question, please see:
  Note to master for the Installation of the Oracle database [ID 1157463.1] Client
  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• Cannot install Oracle Linux 6 EMP 11.1.2.3.0 64-bit

  I tried to install 11.1.2.3.0 on Oracle Linux 6 64-bit PMC. I downloaded and unpacked rest of files in a directory and started installing. But during the installation I can't select the major components because most of them were grey. How could it happen? I don't know what don't get me.

  Is the command that I used to decompress the files

  unzip file_name.zip

  The system version EMP 11.1.2.3.0 for Linux x 86-64 part 1 V45342-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 2 V37974-01

  EPM System Release 11.1.2.3.0 part 3 V37933-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 4 V37975-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 5 V45343-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 6 V37977-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 7 V37978-01

  The system version EMP 11.1.2.3.0 for Linux x 86-64 Oracle HTTP Server V37979-01

  It is appreciated if anyone can help.

  Not always and that these elements should be included in the files listed by the OP, in many cases, it may be requiring the linux packages are not installed, for example.

  

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Need to install Oracle forms and reports 10g

  Hi all

  I went through the first search option, and found a way to install forms for windows 8, I really appreciate if someone send me the link to install oracle forms and States 10 g in the Windows 7 operating system. I just want you to know that I have already installed Oracle 11 g express database.  Appreciate your response. Thank you

  Concerning

  Muzz

  Muzz,

  The link below is the one I used for the installation of 11g (I know that's not the 10 g that you're after) on Windows7 64 bit. But it might be useful.

  http://holowczak.com/installing-Oracle-Forms-reports-11gr2/

  Advice from the Oracle Johny: forms & reports: how to install 11 GR 2 forms and report generator in Windows 7 64 bit OS

  See you soon

  AJ

• Recommended to refer to the calculation of the values for parameters of Linux (kernels, etc.) before installing Oracle

  Hi all

  Hope you are fine...

  Please, I need to install Oracle... WEU it will be (DB Oracle 10 g - 11 g or E-Business suite 12.1 - 12: 2), how can I specify the parameters of Linux values especially grain before proceed with the installation?

  Is there a reference that I can follow which help me to specify the correct values for parameters/kernels Linux?

  
  

  Thanks in advance.

  
  

  Kind regards

  Mohammed

  Mohammed... wrote:

  Thank you, Hussein...

  If I need to install 12.2 but "RAC ASM", is there another note for the purposes of operating systems?

  Kind regards

  Mohammed

  Mohammed,

  You must follow the same doc, just make sure that you install first - CRS refer to the Documentation online database Oracle 11 g Release 2 (11.2) for more details.

  Thank you

  Hussein

• Installing Oracle 11g R2 on Oracle Linux 6.4

  Hi all

  I want to install Oracle 11 g on Linux platform.

  I installed Oracle Linux 6.4 on my pc using the virtual machine VM. The host OS is Windows 8.

  When I try to install Oracle 11 g (using the rpm file) it gives the error: the package is not compatible with this system. Valid architectures are ['i686', 'i586', 'i486', 'i386', 'noarch'].

  When I checked the sound system architecture: i686.

  Please suggest.

  Thank you

  Maeva.

  PL post a link to the binaries guest OS that you have downloaded, and also a link to the binary file of GR 11, 2 you have downloaded. Note that only 11.2.0.3 pl and 11.2.0.4 are certified on Linux 6.x - Oracle & reg; Database

  These versions are only available on My Oracle Support for customers with a contract of paid with Oracle support. If you have downloaded the 11.2.0.1 freely available version, then you will need to use Linux 5.x

  HTH
  Srini

• install Oracle on RedHat Linux AS4 iAS

  Hi all
  
  We need to install Oracle iAS 10.1.2.0.2 on RedHat Linux AS4
  but some packages are required to complete the installation as
  
  
  * 2.3.4 glibc - 2.9
  * glibc-common - 2.3.4 - 2: 9
  * binutils - 2.15.92.0.2 - 13
  * compat-libstdc ++ - 296 - 2, 96 - 132.7.2
  * gcc - 3.4.3 - 22.1
  * gcc - c++ - 3.4.3 - 22.1
  * libstdc ++ - 3.4.3 - 22.1
  * libstdc ++ - devel - 3.4.3 - 22.1
  * openmotif21 - 2.1.30 - 11.RHEL4.4
  * pdksh - 5.2.14 - 30
  * setarch-1, 6-1
  * make-3, 80-5
  * gnome-libs - 1.4.1.2.90 - 44.1
  * sysstat - 5.0.5 - 1
  * compat - 4.1.25 - DB9
  * control center - 2.8.0 - 12
  * xscreensaver - 4.18 - 5.rhel4.2
  ===================================
  the system already have these packages, but some of them is the low version
  
  as
  2.3.4 glibc - 2.9 > > > > > we only glibc - 2.3.4 - 2
  
  ==============
  
  I tried RPM sites to find the most recent version but without any power
  
  
  
  Please advice if I install iAS on existing packaging, it will reflect on installation.performance or stability after that
  
  
  Thank you
  
  Mohamed

  and do you have you code the correct pieces of
  AutoStart the infradb
  and stuff like

  Su - oracleas c.
  # wait the coming infradb
  $ORACLE_HOME/opmn/bin/opmnctl startall > startlog 2 > & 1 &

  etc. etc. etc?

• Installing Oracle on Oracle Linux 5.8

  Hello

  I looked on a lot of blogs to get a good document for the preparation and installation Oracle Linux 5.8 or greater and Oracle 11gR2.I am getting confused with all these documents.

  As this points to create mounting configurations to bring forms Linux point of view etc..,.

  Can someone provide me with a document or a guide, where I can install Oracle Linux and prepare the operating system for installing oracle 11 g 2 and go from there. It would be a great help.

  Thanks in advance

  Oracle database preinstallation tasks

  It has the instructions you are looking for.

• Installation of Oracle 11.2 g ASM on Oracle Linux 6.5

  I need to install Oracle 11.2 g ASM on Oracle Linux 6.5 of the system.

  1 - What is the difference between 11.2 billion to Oracle and Oracle 11.2 g ASM?

  2 - I installed Oracle 11.2 g on Oracle Linux in the past, install Oracle ASM different?

  3 can provide me with instructions on how to install Oracle 11.2 g ASM on Oracle Linux 6.5 of the system?

  Any advice would be appreciated.

  Thank you.

  1 - What is the difference between 11.2 billion to Oracle and Oracle 11.2 g ASM?

  ASM is for managing the storage for the database.  Otherwise, you would create the database on the file systems.  ASM is installed as part of an installation of the Network Infrastructure (even for non-grouped, no CARS, a single node environment)

  2 - I installed Oracle 11.2 g on Oracle Linux in the past, install Oracle ASM different?

  You should make the installation of the DSO and the config as part of the installation of the grid Infrastructure.

  3 can provide me with instructions on how to install Oracle 11.2 g ASM on Oracle Linux 6.5 of the system?

  On Linux 5, no 6.   See the documentation for the Installation at http://docs.oracle.com/cd/E11882_01/nav/portal_11.htm

  Hemant K Collette

• Internet does not work in the comments (oracle Linux)

  Hello

  I have a Windows 8 Host and on VMWare, I installed oracle Linux as a guest, I am not able to access the internet under this comments of Linux machine.

  Note, I have access to internet in the host and I am able to access without any problem. And I have another computer invited under the same VM but it is windows xp and I can't access the internet.

  Internet is not able to access Linux comments!, I checked the firewall for Linux, it is disabled.

  Appreciate your help with this.

  Thank you

  AB

  You did not first louyo 'NAT or Bridged?' question but its context was not perhaps not clear even if, after seeing...

  [root@test-host ~] # ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:55:EF:96

  INET addr:192.168.241.0 Bcast:192.168.241.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  It is not really important because despite everything, it is patently obvious what is the main problem!

  The IP address of the guest operating system is not set properly!

  louyo asked 'NAT or Bridged?', meaning is card virtual machine network configured as a 'NAT or Bridged?' if it has been filled, the guest operating system would have an IP address on the 192.168.0.0 subnet IP and as NAT would have an IP address on the 192.168.62.0 IP subnet.

  Configure the guest operating system to use DHCP or manually assign a correct IP address while setting the virtual machine Network Adapter is connected by a bridge or a NAT.  Since the host uses a Wi - Fi connection, I suggest using NAT and if manually assign an IP address must be between 192.168.62.3 and 192.168.62.127, as that is beyond the scope of the DHCP Server VMnet8 IP address Pool.  If you choose to use Bridged can use DHCP in the guest operating system or using an IP address that is outside the scope of the routers IP DHCP Server Address Pool and for that, you need to check the Configuration of the router.

  You didn't say which VMware product or version you are using however I strongly suggest you read the documentation and specifically Chapter 5 "Configuring network connections" in Using VMware Workstation (PDF file).

• Installing Oracle RAC 10g

  Hello, I need to install Oracle RAC 10 g Release 2 on Linux x 86 in my environment. But I never do. I need know how to install, step by step.

  Hello, read the articles http://www.oracle.com/technetwork/articles/smiley-rac10g-install-082032.html and http://docs.oracle.com/cd/B19306_01/rac.102/b28759/install.htm. As a result, you will can install the RAC in your environment.

  Hugs, Bruno Reis.
  www.brunors.com

• New installation woes - SQLDeveloper on Oracle 11 g XE and Oracle Linux x 64

  Note that as a developer Oracle experienced in enterprise environments running the MS Windows operating system, I am familiar with SQLDeveloper for Windows. However, I have not much experience with Linux. I find not intimidating, just, I don't have a lot of accumulated knowledge.
  
  Recently, I tried to set up a development environment on my portable Windows7 Professional x 64.
  
  1 installed Oracle VBox
  2. install Oracle Linux 5.2 inside the VBox (because Oracle 11 g XE is not certified on 64-bit Windows, to go with a Linux OS)
  3 installed Oracle DB 11.2 XE
  4 Installing JDK as described in SQLDeveloper for Linux x 64 release notes
  5 installed SQLDeveloper 3.1.07.42 - 1
  
  No apparent problems with any of the facilities.
  
  Problem: I can run SQL Plus command line, but when I click on the icon for SQLDeveloper, nothing happens. No error message, nothing else.
  
  Question #1: Not sure how debug/fix it. Will read through the installation and release for SQLDeveloper, but any suggestions would be welcome.
  
  Question #2: This could be due to a problem with the installation of JDK? It appeared to be successful (no obvious problem), but I do not see anything this either in the Oracle Linux menu system that tells me the JDK was installed successfully. How can I make sure that the JDK installation was successful?
  
  Published by: Peter Hartgerink, 19 June 2012 09:12

  >
  Linux x 64 of SQLDeveloper version is shipped with the JDK. There is a recommended JDK version, with a view to install it before installing SQLDeveloper. What I did with apparent success. I guess I'll have to reinstall the JDK and check my Java versions later. Thank you.
  >
  I don't know what JDK you have downloaded since you didn't say. What version is this? Post the link.

  I can hardly believe that the recommended JDK version is 1.4.2 since it is an OLDER version of Java, you have to hunt to find even for download and, especially, the main download page, sql Developer Announces clear what version of Java is required.
  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/index.html
  >
  JDK support
  Oracle SQL Developer 3.1 comes with JDK1.6.0_11. However, you can connect and use any JDK 1.6.0_11 or higher. To use an existing JDK, download the below zip files "with JDK installed.' already
  >
  As you can see you need JDK 1.6.0_11 or above.

  If the version that you say was recommended was actually 1.4.2 is a mistake; view details so that developers can get this fixed an error.

  I don't know what is on your system and can only go by the information you provide
  >
  4 Installing JDK as described in SQLDeveloper for Linux x 64 release notes
  . . .
  version Java '1.4.2 '.
  >
  You have either downloaded the 1.4.2 version which seems unlikely, or your Linux included 1.4.2 and it is used when you try to start sql developer.

  Maybe that your system has now several versions of Java top but the version used by sql developer is evil. If so this is the question that you have to solve.

• Oracle Linux (Red Hat) on 14 t Envy Touchsmart

  I am looking for a compact machine to install Oracle Linux (based on RHEL)

  for purposes of development.

  The 14 t Envy Touchsmart ticked all my boxes (with the exception of the touchscreen) and I'm

  a point where I am seriously considering this machine. I checked the recommended

  material on Red Hat ( https://hardware.redhat.com ) that lists several HP machines,

  who did not understand the desire, but I was wondering if there is a significant difference

  prohibiting the RHEL running on the machine of envy from the officially

  support of the HP machines.

  I understand that RHEL is through a thorough process and some materials may

  do not be taken in charge yet, but I'm ready to compile and install all the required drivers and

  swap the minor components of the material if necessary.

  Essentially, what are the problems that I'm likely to expect in terms of compatibility of equipment?

  A.

  Well, never mind.

  I'll just take the EliteBook 840.