I need to run an UPDATE but the charms don't work!

Similar Questions

• When I run an update on the security of Microsoft works 8, I get "failed", code 646. What is the problem?

  I get this message when Norton runs its updates. The code failed 646 has been coming for a while now.

  Hello

  Follow the steps in the link below and check if this can help: code error '0 x 80070646', '646', or '1606' running Windows Update: http://support.microsoft.com/kb/2258121

• Install fees HCM 9.1, but the links don't work do not. Help please

  Dear all,
  
  I'm trying to make a move to the SAP to PeopleSoft. I thought it is easier to install TFTP since the number of installation source is much less than SAP. However, I kept getting same error where the links does not work no matter which environment I tried to install.
  
  I downloaded all of the software delivery.
  HCM 9.1, PTOOLS 8.52, Oracle 11 g 64 bit, Oracle Client 32-bit.
  
  First test:
  Install on windows 7 64 bit. Everything works fine until the first connection to the TFTP and all links doesn't do not.
  Hakan suggestion is to apply the patch and gave me a link to the old FTP site. I downloaded the patch 85209 but got the password.
  Finally I managed to get a customer to a friend ID and downloaded Patch 85211 and applied. But received error java so I put discarded it.
  Anyway, Gasparotto said the environment is not certified and will not solve my problem with the patch.
  
  Second test:
  Installed Virtual Box.
  Installed Windows 2008 R2 and apply the SP1.
  Installed all over again.
  Insured the similar PTWEBSERVER the username password.
  Everything works fine, but when connect to TFTP, once again... the links does not and see in the lower left corner there are a javascript error where they don't find some objects of peoplesoft...
  
  Just upgraded to IE 9 because I read somewhere that IE 8 is not certified.
  Tried to log in again, no error message and all seems well, but... the links don't work do not.
  
  Newspapers seems normal to me.
  
  Anyone who ever encountered similar problems before?
  Fact it is normal behavior before the tools patch 85211 applied?
  
  Thank you
  aLuNa
  
  My APPSRV journal:
  ----------------------
  PSSAMSRV.12 (0) [03/11/12 09:04:46] (0) PeopleTools release 8.52 (WinX86) from. Tuxedo server is APPSRV 99/100
  PSSAMSRV.12 (0) [03/11/12 09:04:46] (0) used Cache Directory: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
  PSSAMSRV.12 (0) [09: 04:46] (0) 03/11/12 server started
  PSRENSRV.2808 [03/11/12 09:04:49] (0) PeopleTools release 8.52 (WinX86) from. Tuxedo server is RENGRP 92/101
  PSRENSRV.2808 [03/11/12 09:04:49] (3) go to the new C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG log file
  PSADMIN.2124 (0) [03/11/12 09:04:52] (0) attempt to end on the HCDMO field boot
  PSAPPSRV.1488 (3) [03/11/12 09:13:16 GetCertificate] (3) return of context. ID = PTWEBSERVER, Lang = FRE, UStreamId = 091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
  PSAPPSRV.1488 (5) [03/11/12 09:13:21 GetCertificate] (3) return of context. ID = PTWEBSERVER, Lang = FRE, UStreamId = 091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
  PSAPPSRV.1488 (7) [03/11/12 09:13:29 GetCertificate] (3) return of context. ID = PS, Lang is FRE, UStreamId = 091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
  PSAPPSRV.1488 (34) [03/11/12 09:18:47 GetCertificate] (3) return of context. ID = PS, Lang is FRE, UStreamId = 091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

  alunwawa wrote:
  ...
  my configuration.properties file:
  psserver = HARTONO:9000
  joltPooling = true
  DomainConnectionPwd = {V1.1} 6O5vpwGxd5o =
  WebProfile = DEV

  AppDesigner 3tier mode does not care webprofile and Web server. It doesn't use any.

  an idea of the JOLT_CAT:1592 error?

  I think you misunderstandoog 3tier mode.
  3tier with AppDesigner connection is a direct connection to the application through the WSL port server, not on the Web or JSL port server or.
  So first WSL must be activate and port configured on the appserverver.
  Second, your client should point to WSL port (7000).

  You can learn more
  http://Gasparotto.blogspot.nl/2010/03/PeopleSoft-database-connectivity-part_28.html

  Nicolas.

• Satellite M305D: No sound through the headphones but the speakers don't work

  Hey,.

  I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers.

  However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play.

  I don't know if the socket has worked before I refomrated.

  So I can't tell if it's a pre-existing condition.

  Assistance on the issue of the helmet would be greatly appreciated.

  Hello

  Have you tested with another helmet?

  Maybe the little switch that is part of the headphone jack works not properly and doesn t switch between speakers and headphones.
  In this case the question would be related to hardware

  I m not very well if this problem could be related to a malfunction of the software, but it would be really interesting to know if the problem persists after installing the OS from the recovery DVD.

• Need to install KB947821 update but fails and displays the error 9370001 code

  You will need to install KB947821 update but fails and displays the error code 9370001.  Does anyone have a solution?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need to run Windows Update online

  Please note:
  I chose the 'Windows Vista' forum, but the link to this forum.  Please move my question to the right place.  Thank you!
  ========================================
  I need to run Windows Update to www.update.microsoft.com/windowsupdate/v6/vistadefault.aspx instead of from the Panel.  Can I disable the "automatic" version, or is there another way to go beyond this?

  The problem is that my ISP limits the size of downloads of the day, unless I have download only for a certain period of time during the night.  I can't afford to have my computer slow down to dial-up speed during the day below, and since I don't want to give general approval of Windows Update to download and install, I can not limit his schedule.

  Thank you in advance.

  @NicoleL: Please report all further follow-up replies to your original thread:http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/12c29e06-282e-4a70-aecb-135305d9e5b1

  You have a real mess on your hands.

  PS: Despite what you see at the top of this page in the URL or the forum, this forum handles problems of Windows Update for Windows XP, Vista and Win7. [What were thinking?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Cloud of Adobe Creative need to install an update but is stuck at 2%. After a while an error pops up saying server not responding not - error 207. I tried to help out me by clicking Cancel, but still prob.

  Cloud of Adobe Creative need to install an update but is stuck at 2%. After a while an error pops up saying server not responding not - error 207. I tried to help out me by clicking Cancel, but still prob. Help, please.

  You can also view the nets below where the issue has been addressed:

  Error 207 to "install Adobe".

  Adobe creative cloud installation does not work. Get the error code 207. All solutions?

• I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  You have a corrupted user agent which identifies you like Firefox/3.0.11

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• I downloaded new updates, but the icon keeps reappearing eager to download updates again

  I downloaded new updates, but the icon keeps reappearing eager to download updates again, whats wrong & how to fix this?

  Hello

  Check the updates are and make sure that the same updates are not proceed with the installation several times. If the same updates become installed repeatedly, then the steps in the below article could solve this problem.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

  Step to check the installed updates:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

• need to install windows 7 but the laptop has initially windows 10

  Hello

  I need to install windows 7 but the laptop has initially windows 10.

  I'm not very satisfied with windows 10 because we need to separately purchase MS office.

  can someone guide me pls the process...

  Option 1:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  Option 2: (recommended)

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  Buy Microsoft Office

  Office of 2016 for the House, students and professionals - Microsoft Store

• I have notifications on PC Cleaner Pro needing to be activated manually, but the program is not installed on my computer. How can I get rid of this?

  I have an Acer Netbook with Windows 7 and I continue to receive notifications on PC Cleaner Pro needing to be activated manually, but the program is not even appear in my list of programs so I can't uninstall it.  How can I fix that my computer stop giving me these notifications?

  Appear in programs and features? This is where you would be to uninstall.

  See also this thread earlier.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-do-i-remove-PC-cleaner-Pro-2012/f6ace5cf-3b86-477a-8288-95faba6eb369

• Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Locking: double post. See: Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

• The been lots of updates, but the effects, transitions and the text tool are the same. Why?

  The been lots of updates, but the effects, transitions and the text tool are the same and in some cases, we lost a few of them. Add more damage upgrade

  a couple of things that are not relevant. And promise a quick editing and improved timeline and more, but the program still crash and work almost the same thing.

  While welcoming the technical team, it will be useful to improve the effects and titration module too

  Hi Bisa Goma,.

  While welcoming the technical team, it will be useful to improve the effects and titration module too

  You can create a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• Colors in Windows 7 too bright/faded after running Windows Update for the first time (everything was going well after initial installation). See the details.

  I just installed Windows 7 Pro on a HP Pavilion with a HP w2007 20 ". I have had no problem of color first and everything worked fine. The first time I ran Windows Update, it included an optional update called "HP - display - HP w2007 LCD wide screen". That the update "has failed" to install and when I rebooted, my screen had a look very 'neon' - my desktop background, a picture of a tree with a bunch of Red leaves, was very washed out and now most of the leaves were bright red with no visible details. This is obvious everywhere, not only my desktop background (another example... small green circles next to the names of Gmail chat contacts are very bright green, more even than usual). Everything is too bright. I tried the following hotfixes:

  -Manually reinstall the update of the HP screen (it worked this time) and restart - did not work.
  -Reset my monitor to factory setting - has failed.
  -Download and install the latest HP driver for this monitor - did not work.
  -Through: "Control panel-> appearance and personalization-> display-> Calibrate color" and through an assistant color calibration (that's new for Windows 7?). Also, did not work.

  I have the dual-boot of Ubuntu installed on this machine and I think the colors under Linux are always very well, so I think it's a problem with Windows and not the monitor. Because it was working fine before, I would rather try to get everything worked, rather than the update manually the brightness/contrast of my monitor. Any ideas?

  A useful answer, I got on another forum (windows7forum.com). It worked:

  I had this problem too!

  In my case it is also explained by a driver from Windows Update called "nVidia display".

  Fortunately, I figured out how to fix it:

  1. Open Computer Management (start > right click on "Computer" > Manage)
  2. Select "Device Manager".
  3. Select 'show cards '.
  4. Right click 'NVIDIA GeForce 8600 GT' (or whatever your video card)
  5. Click 'properties '.
  6. Select the 'Drivers' tab
  7. Click on the button "return to the version.