Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

Similar Questions

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• Internet connection with Windows XP, SP3 and Airport Extreme - the status is always "absorbing network address.

  My Airport Extreme connected my IMac immediately, but I am not able to connect on the side PC. Airport utility does not 'no matter what Airport wireless devices". When you check the status of the internet connection with PC tools, the correct network is indicated and shows an excellent signal strength. The status is: "absorbing the network address. However, nothing happens.

  Under 'Repair the wireless network connection', it shows, "Windows is taking the following steps: your IP address renewal" even once, nothing happens.

  Under hardware I show Atheros Wireless Network Adapter and the mention: "this device works correctly.

  Yet, no network connection. Any help will be greatly appreciated.

  Hello

  Keep the changes and open the wireless. For example, to disable security in the router (turn on when to managed to connect).

  You can also try the wireless in a friends house, or an Internet café to get a frame of reference for this behavior elsewhere.

  -------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled).

  If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Windows 7 problem of bluetooth connectivity with bluetooth for Skype-ing headsets?

  I've read similar questions on the form, and unfortunately I could not find an answer to my question. Starting from 01/12/09, I upgraded to windows 7 home edition with minor compatibility issues (negligible). But, before installing windows 7 I was able to use my headset bluetooth with Skype. Now, sype does not recognize this connection between pc and my bluetooth headset. Ironically enough my pc has allowed for the configuration of my listener. my headset is appointed to be my helmet without wireless/bluetooth for use with Skype or any other program from my PC. In addition, my PC is allowing and acknowledging the connectivity between my PC and the bluetooth headset but not Skype. I tried to reconfigure Skype, but have failed to prove any changes to the default settings. your help is greatly appreciated.

  Windows Update has nothing to do with the upgrade of Windows or your problem. Contact the Skype Support or try to repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  PS: Is Skype in Win7/IE8 still supported? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BlackBerry Smartphones Bluetooth connection with others

  I have similar problems with other users about the bluetooth connection, my blackberry "BOLD" cannot receive data from the device by using the bluetooth connection. I tried all the steps in the user guide, but nothing helped. What makes me wonder is that it works well, but I don't know, maybe I'm pushing the wrong buttons in the Setup menu? Someone help please? It works fine when it comes to sending data however.

  Try resetting the device with the phone, turn on, remove the battery for 30 seconds and reinstall again.

  Try matching that of devices again, let me know.

• Hearing aids and this TV

  My Sony XBR55X850B arrived the other day, and this morning I tried to set up my sound.

  I wear hearing aids and have a gadget that puts the sound of television through my hearing aids.

  With my old Mitsubishi, I took the sound of my cable box from Cox and fed with a surround sound system and had no problem to have my hearing device plugged in at the same time.

  I tried to plug into the output of the hearing on the new TV and it works very well - but he cut the TV speakers

  DESIGN DECISION VERY POOR.

  I want to get rid of the sound surround (my owner complains it's too loud and hurt his ears even when put down path) and use the TV speakers.

  Since I have the camera for my hearing aids I can hear the TV fine and won't really miss the sound surround... much... good.

  But if I pull the sound of the hearing directly from the cable box there is a delay between the hearing and the sound of television. I hear my hearing aids until I hear the sound of the TV and it creates a terrible echo effect.

  UNUSABLE

  In the menu that I found, there only an option to use the speakers or an external audio system.

  Is it possible to use the internal TV speakers and the headphone jack at the same time?

  If I knew we couldn't do it I would not have bought this set. I hope that this can be and I have not fully understood how and some knowledgeable people here can show me how.

  I guess that, in desperation, that I could plug the sound surround until new which would induce a period equal to the TV... at least he did it with the old configuration there is no obvious response.

  But the receiver got dropped last year and now from time to time, I hear a noise like a large truck outside the House, but it is not a truck... it is the sound system. While I was looking for not to use.

  The headphone jack on the side of the TV has options in the main menu under preferences sound.

  In addition, the optical output on the back of the TV feed line, audio to your receiver level, without cutting the two-way speaker.

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Security problems.  Adobe connects vires of intellectual property. and if so recognize who visited my recordings.  Thank you

  Security problems.  Adobe connects vires of intellectual property. and if so recognize who visited my recordings.  Thank you

  Connect does not collect IP addresses. Records can follow who saw them if viewers are journaled in Connect.

• Vshphere Client 5.1 can't connect with esxi 5.0 and earlier

  Hello

  I am facing a strange behavior I me client Vsphere updated 5.1 but now it is impossible to connect with esxi 5.0 and older versions. When I try to connect to an earlier version of esxi it show me update popup but unfortunately on this machine I can't connect to the Internet ihave manually download a patch?

  Talha Correia

  Hello

  You must download and install the client on your computer.

  You can find in the download section of the website of VMware vSphere.

  It comes to 5.0

  https://my.VMware.com/Web/VMware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_0

  Francesco

• Why my front panel opens with a white background and most of the invisible control

  When I open my vi and several others, they open with a white background and most of the controls not returned as theis

  

  After I resize it looks like it should

  

  It's probably somewhat similar to these problems of crazy object.

  Sometimes copy/paste works because it takes your code on a VI that could have a corruption and put in a cool VI.  In your case, the corruption could be linked to the control itself and he just copied over in the new VI.  Money controls are a relatively recent creation which added some fancy appearances.  They don't seem to be the style that is most likely to have some behind the bugs of scenes from the styles of controls that were longer.

  If you have a shared services provider, or if a person nor jump here and wants to study, they want to can see your VI and understand what goes wrong.  If this isn't the case, I hope that what you've done has solved the problem and you can spend without return.

• I bought Adobe Acrobat Standard DC with a new computer and only got the Adobe Reader software.  How can I get the software I purchased?

  I bought Adobe Acrobat Standard DC with a new computer and only got the Adobe Reader software.  How can I get the software I purchased?

  Hi debc6197,

  Download Acrobat Standard DC following the steps in this document KB, download and install Adobe Acrobat DC if it is a subscription (make sure that you are connected using the Adobe ID, in which you have a subscription for Acrobat Standard DC.) or if it is a perpetual license download using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards
  Nicos

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

  I have difficulties to use the Bluetooth on my phone i 5 c with my car radio/phone and I pads. It was working fine until today (July 20, 2016). I tried to turn off the phone, re-start the phone and also deleted the items matched, but goes on to say "the connection failed". I've also updated the phone to 9.3.3. But still unable to pair anything with my i phone 5 c

  Hi Charley777!

  I understand that you are having problems with your iPhone Bluetooth function.  It is important to have your iPhone Bluetooth works properly, so I'm pleased to offer you a few resources.  Here are two articles of support with troubleshooting steps.  The first is specific to the car stereo coupling, and the second applies to other Bluetooth devices.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  Thank you for using communities of Apple Support.

  See you soon!

• Bluetooth connection with the Lego Mindstorms NXT robot

  Hello
  I got a license for Bluetooth Stack for Windows by Toshiba.
  I try to connect to the Lego Mindstorms NXT robot: http://mindstorms.lego.com/en-us/default.aspx
  But it does not work.
  The connection seems to be good and NXT and PC to find them, but when I try to connect, the NXT said "the line is busy".
  Is someone can tell me if he can get through this issue?
  Toshiba and Lego have an agreement on the connection of the questions?
  Thank you.

  Hello

  Do you have Toshiba notebook or just use the Toshiba BT stack?

  How to pass through this issue? Should anyone of us spent 250 Euros to buy it and test it at home? Dear oracid it's user forum and you can get help from someone who has the same home equipment and can help you with his experience.

  Agreement between Toshiba and Lego in my opinion it is not problem. Any manufacturer who build material and want to use BT must know how it works. On the market of equipment, there are specific characteristics for each communication technology and what do we do Toshiba is to build and offer the specified material.

  In your case, you must contact the Lego support and ask for help. they, no doubt, tested own stuff with different hardware platforms, the operating systems and software BT so Lego should have enough experience with own products.

• Bluetooth connection with headphones

  Hi forum,

  I bought the receiver rx2 Hama Bluetooth to connect my Portege via Bluetooth
  with my home entertainment system. It works very well. Toshiba-bluetooth-stack handles
  the device as a Bluetooth headset. The only thing I miss, is an auto-connect-option.
  Now I also have to connect manually each time: right-click on the icon of the power off
  and the "connect". My cell phone will connect automatically to every time.

  Someone has an idea, how can I achieve the automatic connection with my "helmet"?

  Thank you a

  Best regards
  Martin

  Hello

  The same situation here, but I can leave with it. Mobile phone automatically detects the headphones, but by usage with my Tecra I have to activate manually whenever I want to use. As you know you can use many various BT devices with your laptop and I n don't know if he has a sense for each to connect after starting the laptop. I have only one device of BT and did not attempt to check if more than one device can be connected at the same time. If you know more about it please let know.

  I'm really interested on this subject and maybe someone of the explanations on this subject.