I ran a diagnostic on my dell xps and he said that my network 9 cards and 11 will not work because of windows
I went to the Device Manager to see if something was not working and the 9 and 11 adapters will not load not because of something that invovles windows, I didn't understand and I wanted to know if these cards need to work. Also my Intel graphics driver kernel slows things should uninstall.
Hello
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen
Tags: Windows
Similar Questions
-
Reference Dell backup and restore will not be updated
I have just updated to Windows 8. 1.
When I checked the notifications told me that Dell backup and restore was inconsistent and I needed to re - install. Before all else, I checked the Dell website and it is advisable to update the program by opening and clicking Update.
Unfortunately, when I click on control upgrade tells me that my request is updated according to the picture below.
Is there another way to update the application?
Go to www.dellbackupandrecovery.com
Uninstall the old version and install new then.
Here's a direct link:
www.dellbackupandrecovery.com/Dell_Backup_and_Recovery_1.7.5.64.exe
-
Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.
If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
Disconnect the power supply for a day + new and it worked once tried.I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.
What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.
Rav96Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.
If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
Disconnect the power supply for a day + new and it worked once tried.I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.
What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.
Rav96
A flashing orange power LED, usually indicates a power supply problem power, given the age of the Dimension 9200, which is highly likely.
Try to replace the power supply with a power supply of labour "Known", to see if that makes a difference.
This system does not use an exclusive power of Dell, you can install most power supply ATX with a power connector 24 pin or 20 + 4 pin main motherboard and this can be purchased in most local computer stores, or online.
The 9200 has a rear panel open, a diet with or without the on/off switch can be installed.
Note: You need a PSU with six SATA power connectors.
Otherwise, you can buy a refurbished Dell OEM [Dell P/N KH624] 375w PSU from here:
http://www.Amazon.com/Dell-dimension-power-supply-KH624/DP/B0039OHV2O
Bev.
-
I have a Dell dimension running XP and IE8 will not respond
I have a Dell Dimension 4500 XP pro and IE8 will not respond.
When I click it it flashes up on top of the screen and disappears. To this effect, I can't watch the updates from Microsoft.Any ideas, anyone please?
Delete.
Hi guys,.
It seems that my problem is solved.
I removed a lot of the years of updates then run my drive setup and turned off and went to bed.
When I turned on this morning I had to install updates. It was the only thing I was worried, and as this seems to be fixed, I am glad I use Firefox as my browser.I installed Speccy and he ran and it shows as running windows updates and it works correctly.
Thanks a lot for all your help guys.
Delete.
-
black screen and nice white cursor and Ctrl alt del will not work, I can not update shell
black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?
Hello
Your question I know that some of these methods is not available now, however, all
Convenience store is included just in case where win you some access as you try to solve the problem.You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Dell 924 printer will not work with vista Dell 530__
What do I need get the Dell 530 and 924 printer to work together.
Download the drivers for it at the link above.
Read the manual.
http://en.community.Dell.com/support-forums/default.aspx
Ask to above Dell Help Forums.
Contact Dell Support.
See you soon.
Mick Murphy - Microsoft partner
-
Start my computer, it will default to the CTRL ALT DEL screen. After graduating in the login screen I enter the password. Windows will start and then the screen starts flashing and the screen say Logging Off, then restore the screen to the CTRL ALT DEL I can boot into safe mode. All other functions will not work.
Thank you
I guess you wanted to ask how to solve the problem. If then all in Safe Mode you can use system restore to set up Windows to a point when the problem did not exist.
-
No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.
Any help will be much appreciated. Thank you.
As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:
Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.
-
the keyboard of my dell computer will not work
the keyboard of my dell computer will not work
Reference Dell _ (model)?
Tried other keyboards?
How to get into BIOS but not once the operating system has started?
-
Dell XPS 9530 - Games using integrated instead of GeForce card
Hello
I have a new Dell XPS 9530 with integrated graphics Intel 4600 and GeForce GT 750 M. 8.1 Windows media center, 64-bit.
When I start a more demanding game I get good performance for a few minutes and then it comes down to something like 10 frames per second. After leaving the game, I can see this blue icon in the system tray representing the Intel graphics. That's how I came to a hypothesis that the Intel card is used in the games.
In NVIDIA Control Panel, I put "processor NVIDIA high performance" as a favorite graphic processor, but it has not changed a thing. I have the latest drivers and up-to-date experience of NVIDIA for the last.
It's rather disappointing to have a good material but not being is not able to use it.
Does anyone have an idea how to apply Windows to use the GeForce card in the games instead of the Intel low one?
My XPS 15 is presented a few weeks ago.
I had problems of limitation. Games would be solid for 10 minutes and then slide down to 10-20 fps.
I found a solution that works for me, however.
I use NVidia Inspector to limit the framerate at 30 frames per second. Now, it runs at 30 fps for hours, instead of 60 frames per second for 10 minutes then 10 frames per second. http://www.Guru3D.com/files_details/nvidia_inspector_download.html
Even require as the MWO and citizen of Star games run perfectly at solid 30 fps for hours without limitation.
Hope that helps. Would be even better if Dell put in a cooling sufficient in these things, however. Of course, the GPU is much more capable that allows cooling.
-
Dell Power edge 2850 will not let me install windows server 2003
Hello
I tried to install windows server 2003 on a few servers, I received a few weeks back. The RAID put a system in place and turned but when it tries to install WS he says that there are no hard drives.
I tried to download "server Dell Power Edge update through bootable media / ISO ' but there is no download for a 2850.
Also I tried to download this "Dell systems build and Update Utility" but most of the time it stops and says failed download...
Hello
This link is the user's guide.
I bought a 2950 on Ebay the month last but never had the intention on the installation of a Windows operating system, but I downloaded the ISO of DVD here file and installed without any problem they send you a key to save the operating system. I updated the bios after this and no problem. You never said how many hard drives you have, but make sure that you have two or more. So far, I've installed VMWare ESXi which was supported on 2950 but I settled with XenServer 6.5.0 and I 2003 server running as a virtual machine which works very well.
I have a Dell XPS workstation I have recently reinstalled Windows 7 on it but I had only one drive is connected and the operating system could not see all of the hard drives. After that a second device and do not use raid on this machine, I was able to install Windows. I tried the ISO Live Dell 2850 version but it is not a. Which includes diagnostic tools. When you by a Dell there pre installed in a hidden partition on the disk utility, you can run, but it really isn't anything I know install that. Usually the F12 key will give you a list of items to boot from and if she isn't here the disk, it cannot run. The diagnostic utility that is.
-
Pentium 4 CPU
1 GB of RAM.
Win XP Pro - SP 2
Dell Dimension 4500
If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.
-
Dell Inspiron 1545 with a 1397 WLAN Mini Card with XP and SP3 will not connect to WPA2
My laptop is a Dell Inspiron 1545 with a 1397 WLAN Mini Card in XP that has less than two years. I can not connect to WPA2 wireless networks. I have SP3 installed, when I try to install the patches, it is said that I must not and will not let me. I tried to update my wireless card, Wireless Zero Configuration running and it still doesn't work.
Hello
XP SP3 is already compatible WPA2.
Have you checked that utility without the seller wire initial is not too active?
The card connects to open source Wireless and WPA - PSK protected?
Did you use the latest drivers from Dell?
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Dell Deminsion 4700 set to upgrade to vista and audio drivers not working not
OK I installed Vista and before that I was supposed to pilot audio donwload for noise at work. Well, now that I've updated the drivers I downloaded again does not work. So now I have no sound at all. No audio device installed. What is there I can do to fix this?
Maybe Dell doed has NO Vista Audio drivers for your model.
If they are not, there is nothing you can do.
http://support.Dell.com/support/downloads/
Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
Reference Dell Factory Image Restore will not work.
I have a Windows Vista laptop and I got a virus so I went to the system recovery options to restore it to a factory State. It starts, but it doesn't actually do anything, and now my computer won't even fully start. Just, it starts and load the Dell page and then bar Windows load and then it starts the startup repair but nothing is ever able to set.
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
Above is the use of the Dell Recovery Options.
If you have problems using the Dell recovery process, contact Dell directly.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
HP laserjet CP5525: error fuser 50.B2.00
When I turn the printer on it more this message "error fuser 50.B2.00. I turned it works but still the same problem. Please what do I do?
-
Question about the installation of the driver on the Satellite M70-249
I lost my recovery disc and I am trying to reinstall the software due to a virus.I downloaded all the drivers from the toshiba site, but I still have a cause of issues, that I could not succeed to understand where I need some drivers.I have a toshiba
-
I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS
-
no disc hard Access 2 cannot access 2 all accounts when I right click on Start button but can not download or delete all files now what? rpet access denied the fact in the back also
-
BlackBerry application BlackBerry ID initial username change
I had to check an e-mail address that I have recorded my z10 with. I don't have email access to.that more. Now i.want to.change the field ID BlackBerry to my new e-mail address. How then - i.do.that.