I ran Kaspersky rescue disk and susessfully but now cannot get my notebook Acer Aspire at startup
I ran Kaspersky rescue disk and susessfully removed some adware. To get my laptop Acer Aspire to boot from the cd of Kaspersky, I had to change to start prioroty in Windows 8. Afer running the Kaspersky disk, I rebooted and found my laptop wouldn't start up (not found) Windows - and it will be to only boot from the cd/dvd ROM. It has been a week and I can't use boot for Windows. What I see when I start my laptop is: "Realtek PCIe GBE Family PXE - E61: Media test failure, check cable PXE - M0F: exit ROM PXE.» No boot device", it will start when I insert"Ultimate Boot CD ". Can I use the Ultimate Boot CD to restore the boot order or point my laptop Windows 8? Thank you!
Starting the BIOS by pressing F2, check if your HARD drive is still listed on the Sata ports.
If in the list, go to the EXIT and choose "load the default values and save on exit, and then tries to boot from the HARD drive again.
Tags: Acer Laptops
Similar Questions
-
2 years ago, I bought a dell to Wal - Mart 6 months to a year later started having problems I was sent to a disk hard was not then a cd rom drive was not so ok dell restore discs but started again said I had to buy the record of service for 139 + or wipe because I was not registered. Well, I thought that I was put a few oem in place number victory reg key code that I now know that, battery, think you said dell ordered all this in a year without now im stuck so decided to modernize a victory pro from amazon.com but again I can not save one of them and I continue to have started off any HELP im new on computers and cell phones and im frustrated will be totally leave for months and then try to new any help appriciated thanks
Use the key in your battery compartment (as long as it matches the version of Windows you purchased at Amazon) and activate by phone.
You can not use the key (if it is a key 'Upgrade') as he was expecting to find a previous version of Windows installed and activated.
Need an installation DVD that corresponds to your Dell key, read on.
Download Windows 7 proper. ISO file that includes Service Pack 1
(Note: must match for your product key version)Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.isoWindows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.isoWindows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.isoHow do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bitAfter downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
====================== Keyless Install ================================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.====================== Device Drivers =================================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersTips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxActivation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048J W Stuart: http://www.pagestart.com
-
Found where download Acrobat 7 and 10, but now I get invalid serial number message.
I received my serial number Adobe. I have blocked and copied directly to my Excel. I downloaded the Adobe program and now I get a message telling me that it is an incorrect serial number. I use the correct number for the appropriate program. None worked. I tried with and without hyphens. Why do I get this message?
I uninstalled all Adobe, reinstalled Adobe 10 Standard, then it worked, we asked two serial numbers and was able to register my product. Thanks for your help with this.
-
I downloaded an excel document created on my computer in XP and sent by e-mail to someone else. I went to my email address on my computer of husbands, active uses vista, downloaded the excel file, I sent my email, changed and saved. I thought. now, I don't know and I don't have the data to revise again. can someone please help!
* original title - download dilemma *.
Hey ramona Roberts,
Unfortunately, you have not saved the excel file on the hard disk of the computer after review.
Whenever you download a file from the internet or send its recommended to save it to the computer hard disk first and later change, so that you don't lose any information on the file.
-
When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me. Any ideas as to what is wrong or what I am doing wrong?
Hello
If you have not already done so, it could be that you want to configure your watch with these settings:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.
-On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).
-Also on the password settings screen, select Unlock with iPhone.
After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.
Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.
More information:
-
Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?
Log in to the App Store and look under the purchases tab.
-
I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?
Please see that.
-
My modules, however, seem to be installed and working, but I cannot, install or uninstall or configure them.
Try to force Firefox to rebuild the list of installed modules.
- Open the profile folder for more details on how to access see article profiles - where Firefox stores your bookmarks, passwords and other user data .
- Closing Firefox, then delete extensions.sqlite (you can also delete extensions.cache, extensions.ini and extensions.rdf if they exist)
When you restart Firefox must be rebuilt on the list of installed modules.
If this does not work, you can have an add-on that is causing the problem, try the options in article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .
If you type Subject: addons in the address bar that brings to the top of the list of modules? I saw a list of empty modules if Mr Tech Toolkit is installed, accessing the Manager add-on by typing about: addons in the address bar is a workaround with this add-on installed. The author of this add-on is working on an update.
-
I can work between my Mac and iPad, but can not get my iphone to receive transfers?
I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers? The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.
Did you numbers is synchronization correctly via iCloud on your iPhone? You could check that the connection of numbers to iCloud is turned on at two places:
Settings > iCloud > iCloud Drive > numbers
and,
Settings > numbers > use iCloud
SG
-
Firefox 3.6 doesn't open, uninstalled and reinstalled but still cannot open Firefox or other web browser except IE8
After the Java Update
User Agent
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)
Hi - yes even!
I did nothing else during the last 3 days but now Firefox has decided to install and it loads fine - I have no idea why or what caused it as I have not downloaded one thing - but thanks for the aid application. Regards Terry -
Webcam is displayed in devices and printers, but can not get turned on?
Original title: webcam 270
Webcam is displayed in devices and printers, but can not get turned on?Hello
· What operating system do you use?
· You're using a built-in or external webcam?
· What is the brand and model of the webcam?
· Were there recent changes made on the computer before the show?
Method 1:
I suggest you to check in Device Manager if you can detect the webcam. See the link below to open the Device Manager in windows 7:
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
Method 2:
Try to update the drivers for the webcam from the manufacturing site and check if it works:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Use the hardware and devices Troubleshooter to fix the problem.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 4:
I also suggest that you run the Microsoft fixit tool and check if that helps:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
-
Original title: update problems
I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779" and "Windows Update has encountered an unknown error. I tried to find an explanation here, but no result.
see if that helps-
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058 -
I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?
Happy that he sorted out for you. Thank you for taking the time to let me know. MS - MVP - Elephant Boy computers - don't panic!
-
original title: ACTIVATION of VISTA
I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.You simply have to use telephone Activation...
activation by telephone (call of the operator)Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you
Maybe you are looking for
-
Question on batteries for Satellite A300
Hello, I have Toshiba Satellite A300 series, with battery b - 15 ~ 4000 mAh. model PABAS098, precisely: TOSHIBA PA3534U - 1BRS PABAS098. I would like to know if there is a battery for my laptop with a capacity more than 4000 mAh, meybe about 8000?If
-
Equium A110-233 stops using the WiFi and the fans work only 3 sec
I bought an A110 - 233 20/09/06. It works very well for about 1 hour then it interrupts the communication via the wireless network connection status States he is always connected, sometimes but not always the configuration window indicates that the w
-
where to look in to connect my printer?
-
Wireless HP 6500 not print / scan to Macbook
There are several discussions about Mac and 6500's. I tried everything I think, but who knows if the order is important? I rubbed, reset, restarted and even cried a little looking for the magic to get a 6500 wireless print and scan from / to a MacBoo
-
Bad Pool Caller error (Windows 8) - including the link to my Minidump file
Hello! I recently received 4 blue screens; the first three were probably related to Avast, so I uninstalled ( Memory_managementerror) Later, says error Bad_Pool_Caller I have already travelled through further discussion, so here is the link to my Min