laptop put in wrong code to "reg" when had key number how to change a battery bought windows pro disk and updated but now cannot find where the same register that help please
2 years ago, I bought a dell to Wal - Mart 6 months to a year later started having problems I was sent to a disk hard was not then a cd rom drive was not so ok dell restore discs but started again said I had to buy the record of service for 139 + or wipe because I was not registered. Well, I thought that I was put a few oem in place number victory reg key code that I now know that, battery, think you said dell ordered all this in a year without now im stuck so decided to modernize a victory pro from amazon.com but again I can not save one of them and I continue to have started off any HELP im new on computers and cell phones and im frustrated will be totally leave for months and then try to new any help appriciated thanks
Use the key in your battery compartment (as long as it matches the version of Windows you purchased at Amazon) and activate by phone.
You can not use the key (if it is a key 'Upgrade') as he was expecting to find a previous version of Windows installed and activated.
Need an installation DVD that corresponds to your Dell key, read on.
Download Windows 7 proper. ISO file that includes Service Pack 1
(Note: must match for your product key version)
Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso
Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso
How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit
After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640
ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/
Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)
Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
====================== Keyless Install ================================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".
You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.
====================== Device Drivers =================================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us
= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.
Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)
The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx
Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
J W Stuart: http://www.pagestart.com
Tags: Windows
Similar Questions
-
Same as above. Thank you.
look at the tabs on top and click the one on the left or close your who I guess, said something welcome or anything else.
-
I downloaded a PDF file, but now cannot find where I put it. Where would it be?
Is there a place on my computer, where are all of my PDF files? I downloaded a manual in PDF format and now can't find it.
Download folder.
Open ie9,
CTRL + J
Drag it to your folder My Documents.
-
I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please
It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.
-
recently installed xp pro but can't find driver for usb controller any help please model nx6325
recently installed xp pro but can't find driver for usb controller any help please model nx6325
Welcome to the HP Forum!
edgeville wrote:
recently installed xp pro but can't find driver for usb controller any help please model nx6325
All the Windows drivers for your laptop are on Portal support business web users for your laptop HP. In the drop-down list, select Windows XP. It's an operating system supported so reinstall drivers.
Check the Basic Input/Output System (BIOS) for Legacy USB Support. To do this, follow the procedures below:
- Restart the computer.
-
I downloaded the demo of Photoshop elements 13 and saw some instructions when downloading but now cannot find them and I do not think that have completed the installation as it is not on the computer. There is a deployment folder that I can click in. Could this be it?
Barbara, what version of operating system do you use? / Applications (Mac), you can check and control panel > programs and features (Win) to check if it's installed on your machine.
Here is the link for products download Photoshop Elements | 10, 11, 12, 13
I hope this helps.
-
I have a wireless router at home and everyone using it without any problems... except me! I continue to get purged from the connection and then I have to turn my windows firewall whenever I have reconnect. It can be very annoying, especially if I'm in the middle of a transaction. Any ideas please?
Hello
(1) do you have made no changes before this problem?
(2) you receive an error message?
Windows wireless and wired network connection problems
"Network connection is intermittent (periodically disconnects).
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
If you are able to connect to network after having turned off the windows firewall, and then add an exception in the windows firewall.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall
Additional reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow#section_2
I hope this helps.
-
«Windows cannot find setup.bath...» "Help, please!
When windows starts, there is an error message «windows cannot find setup.bath...» "and when I click ok my pc restart. What should I do? (Sorry for the bad English)
To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.
-
Can someone help me understand why I can only access the video editor after you download photoshop elements 13
It seems that you downloaded Premiere Elements rather than Photoshop Elements.
Premiere Elements video editing =
Photoshop Elements = editing still images
Download Photoshop Elements from here
https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-10-11-downloads.html
If you received a serial number starting with 1057 then that is for Photoshop Elements. If the serial number starts with 1143, then it's a number of Premiere Elements.
Brian
-
I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me. Any ideas as to what is wrong or what I am doing wrong?
Hello
If you have not already done so, it could be that you want to configure your watch with these settings:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.
-On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).
-Also on the password settings screen, select Unlock with iPhone.
After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.
Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.
More information:
-
When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
use widows xpHello
- Have you tried to Hibernate for ever in the power settings option?
To resolve this problem, you can follow the steps below.(a) click and start(b) type power Option in the start search bar.(c) now select click Change plan for the current plan of the selected power.(d) now click on advanced power settings.(e) scroll down and click on the sign more next to sleep.(f) now click on allow the eve hybrid and turn it off.(g) click on the option put into hibernation after and set it to never. -
STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.
Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please
Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.
Solution:
1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.
2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)
3. type: BATCH spuninst.txt
4. type: exit
Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.
-Tom Steele
http://www.hawkandtom.com Tom Steele -
When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please
Hello
If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):
-
I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?
Happy that he sorted out for you. Thank you for taking the time to let me know. MS - MVP - Elephant Boy computers - don't panic!
-
Original title: received message 'disk full '. I can see 933 GB of free space when I display the properties of the operating system (c :)) help, please!
New computer - Dell Inc. 05DN3X (CPU 1), MS Windows 7 64-bit SP1, processor Intel Core i7 930 at 2.80 GHz, 6.00 GB Triple - Channel DDR3 @ 666 MHz, 977 GB Western Digital WDC WD10EALX - 759BA1 (SATA).
Problem:Downloaded a program (32 MB) (SRIM 2011.exe) commonly used to work and tried to extract it to a new folder on the OS (C :) - received message 'disk full'.) I can see 933GB free space when I discover the properties of the operating system (c) - Quota is turned off.Have used the program mentioned above (SRIM.exe) several times before using different operating systems XP to work without problem...Help, please!THXGiven that this was written in 2011, I'm sure you understood something at this stage. However, the post also has much a views, so I think it might be a persistent problem, so I'll post my solution:
When I copied the file SRIM - 20xx.e in a folder of SRIM-20xx under Program Files, I had a "Disk full" error when trying to extract the files, even though I had a lot of space on my hard drive and without limits. After a bit of messing around, I like the solution is to move the SRIM-20xx folder on the desktop, and then unpack it. After extraction, which leaves you with a lot of seemingly useless files, double-click CONFIGURATION and the installation will begin appropriate. Installation will create a file under Program Files, there will be no need to make things happen later, simply remove the meantime extract the folder to your desktop computer.
Maybe you are looking for
-
H8-1170uk: Nvidia gtx 900 series
I have read reports on the forum of people who want to upgrade the graphics cards in their machines, but encountered problems with the boot after installing Pci-e cards, 3.0. I replaced the gt545 provided with my h8-1170 with a gtx 560ti about 2 days
-
Installation of fedora Linux next to my window 7 (dual boot)
Hello I am facing a problem while installing fedora on my computer windows laptop Z580 7. I had narrowed the C drive to get 100 GB of free unallocated space where I could install the linux os.but when installing, I am confronted to error: ERROR of PA
-
TPC-2012 cannot read the shared variable
Hello I have a TPC-2012 and can not read variables shared with him. I welcomed the shared on a cRio-controller Variable. On another PC, the variable is read correctly, but not on the tpc-2012. What can I do? No error message is displayed on the TPC-2
-
All installed crash of Labview versions since 8.2 install
So, on my development machine, I had to LV7.0, 7.1, 8.0 and 8.6. (As well as the different version of teststand, daqmx, nor-daq, tool boxes, etc...) Then came the day, there is no if a long time (say two hours) I'd need LabVIEW 8.2. So I install it
-
Video card stretch in dv6704nr HP Pavilion Entertainment Notebook PC?
I'm looking to improve the graphics on my brother's mobile, but wasn't sure if that was even possible with the laptop HP Pavilion dv6704nr. I'm sure that could increase the RAM, but I wanted to check in the graphics card in particular. If anyone ha