I receive on this j.4 windows update kb2467175 because it is already installed

Similar Questions

• Code 80070005. After carefully installing Windows 7, Windows update tells me that I must install a critical update that keeps failing

  After carefully installing Windows 7, Windows update tells me that I must install a critical update for the graphics card to Nvidia 9600 m GS on my Touchsmart, but every time I start the process, the download fails with the error code 80070005. I tried several times a day for a week now. Media Center won't play any TV, saying that the correct graphics drivers are not installed. I tried to install the drivers from the Nvidia site, but nothing helped.

  Hi Jos Kelly,

  Try this link, it might be useful:

  http://www.nvidia.com/object/win7_winvista_32bit_191.07_whql.html

  Good luck, let us know if it works.

  Stephen Davies MS

• Windows Update crashes when you try to install an update.

  Running Windows Vista Home-system hangs at the screen that says: do not unplug or turn off your computer - installation of update 1 of 1.  Has been hung for 2 hours on this same screen.  Update is currently set to automatically install updates.  Should have started last night.  Cannot use the computer without defying the screen that says do not unplug or power off the computer.   What should I do?

  Here are two methods you can try: method 1: start with the Windows installation disc and use the repair feature method 2: start the computer in safe mode and then use the system restore feature

  Source: http://support.microsoft.com/kb/949358

  FOR INFO:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  TaurArian [MVP] 2005-2011 - Update Services

• How do we prevent windows pop up?  I have already installed Malwarebytes Anti-Malware

  I can't summarize my question is better than what I've already written and which is: How do we prevent windows pop up.  I have already installed

  Malwarebytes anti-malware.

  Well, if you're really under 10.5.4 as shown in your profile, then MalWareBytes certainly will not work. For example, you could write a better question: write an effective communities of Apple support question.

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Receive error code 8007040 when windows update is attempted

  Hear the automatic update and the last time an update was attempted received the message cannot be updated and when tried to update race received the error 8007040. This persisted for the last two days and every time I try an update receive 8007040 error code. What can I do to fix this?

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  1. run "msconfig" and disable all startup items. Under 'Services', hide all Microsoft services and then disable the others.

  2 restart the computer, and then disconnect it from the network and disable the antivirus/spyware software.

  3. Insert the Windows Vista DVD in the drive.

  4. in the settings window, click "install now".

  5. click on "go online to get the latest updates for installation (recommended).

  6. type the CD key if you are prompted to do so.

  7. click on 'Yes' to accept the Microsoft software license agreement.

  8. in the screen "which type of installation do you want?", click on "Upgrade".

  9. when the installation is complete, restart your computer and try again
  to install the updates.

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot receive the Vista SP1 via Windows update

  Hmm... O always waiting for SP1 update through WU. I am at a loss of what kind of drivers that may be causing this not be available.

  Anyone have any ideas?

  I know that I've posted about this before and others have said to download the standalone version but... I was still hoping WU...

  Hi mate,

  Today the question? I mean, if the update of windows still do not offer SP1, just download it if you want to have it installed on your system.

  I really Don t understand your problem, it s quite usual that windows update offers updates/bug fixes sometimes later then service packs are released.
  So just download it and install it on your machine, West no difference between the installation of this "standalone" version or download via windows update.

  Welcome them

• WindowsUpdate_00000646. I tried to install the important updates 15 3 times and every time I try to get this same error. And I have even went to the Windows Update page and still could not install. What is my next step?

  Here is a list of the updates that I need to install and for some reason I can't.

  Update for Windows Live Sign - In Assistant (967912 KB)

  2007 Microsoft Office Suite Service Pack 1 (SP1)

  Update of security for Microsoft Office 2007 (KB951550)

  Update of security for Microsoft Office Excel 2007 (KB959997)

  Update of security for Microsoft Office OneNote 2007 (KB950130)

  Update of security for Microsoft Office Word 2007 (KB956358)

  Update of security for Microsoft Office System 2007 (KB936514)

  Update of security for Microsoft Office System 2007 (KB951944)

  Update of security for Microsoft Office System 2007 (KB954326)

  Update of security for Microsoft Office System 2007 (KB956828)

  Update for Office 2007 (KB934391)

  Update for Office 2007 (KB934393)

  Update for Microsoft Office System 2007 (KB967642)

  You may have overlooked this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get this error code, Windows Update error 80072efd can help me please. I have windows vista on my lap top.

  I tried to do what he suggests using windows, that is to

  To add the Windows Update Web sites to a firewall exceptions list, I think I did, I have norton 360 still does not work.

  Problems began on 06/02/09 all trying to update internet explorer 8.
  Vista service pack 2 failed to download also the two with the same error code
   

  Hello

  Basically, you have a firewall blocking updates. Stop or uninstall Norton, using their removal tool and
  Try updates.

  Download - Save - go to where you put it - right click on – run as administrator

  Norton Removal Tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Make sure that IE can work and is allowed in the firewall also.

  Windows Update error 80072efd
  http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update for
  install updates
  http://support.Microsoft.com/kb/836941

  Unexplained computer behavior may be caused by deceptive software
  http://support.Microsoft.com/kb/827315
  Also, run the fixit:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  -----------------------------------------------
  If you still have questions, you can open an incident report for free.

  Go here and and click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  Hey GMPete

  some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

  I suggest tha contact you hp because it's their recovery process you use

  at the below link HP support forums

  http://h30434.www3.HP.com/

  link below is for direct hp support contact us

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• Windows Update 09/02/2016 fails to install on my Toshiba Satellite L655. I want to install this detected (Toshiba has not been used since 25/01/2016)

  I want to install the update 09/02/2016 W7 so I can move on to W10.  Did not use the Toshiba Satellite L655 since 01/25/20.  Want this ancient system to be available and up-to-date Windows down the line if IU need to use.  How can I work around this problem, or force the update to install

  Install the latest version of the windows update client.

  https://support.Microsoft.com/en-us/KB/3161608

  Make sure you do not have a search for updated online running in background during manual installation.

  Best regards, VZ

• ERROR; Windows Update 646 unable to download and install updates

  original title: ERROR; Update Windows Update 646___windows update 00000646 windows dt 000__it blocks the download and installation of updates

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows update fails to Downlaod after clean install

  Hello

  Im having problem installing windows update after clean install (although it happned to me after GHOST as well)
  On my new computer, I have 2 updates of isnatll 1:
  (1) Windows Genuine Advantage Validation Tool (KB892130)
  (2) update for Windows XP (KB898461)

  When I try to install them by using "Windows Update" or "Microsoft update" I get the following error code: Error Code: 0 x 80246002

  someone meet souch problem?
  When google for a solution based on this error code I found nothing.

  Thank you very much for your help,
  see you soon

  What were the problems you saw that you thought a "clean install" of Windows XP could solve?

  This "clean install" included formatting the HARD drive?

  The "clean install" left you with WinXP WinXP SP1, WinXP SP2 or WinXP SP3 gold (no Service Pack)?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a test free version comes preinstalled when you buy it and that would have been reinstalled, but invalid, when you did the clean install)?

  You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958056

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CPU ankles 95-99% stuck on svchost.exe after that Windows update Nov 12 patches to not install

  Automatic update of Windows was put on 'On' on the morning of November 13, 2013, when I received the notice of Microsoft system tray that updates of Windows patches were ready to be installed on my computer (XP sp3, IE8, MSE).

  Updates proceeds to installation with the updated bars before the normal close.

  Updates is apparently blocked at the first update. I let it run for about 15 minutes before I made a hard stop. I thought that maybe I had lost to the Internet because the update seemed stuck on the first and took too much time, it seemed.

  Next start, computer slows almost stopped after a few minutes.

  Guilty is svchost.exe SYSTEM alternating between 95 and 99% of my system resources. I turn it off and computer returned to normal.

  Has done research on the web, stop automatic updates and processor svchost problem disappeared, unless I went to Microsoft updates and svchost.exe Web page re - would seem to consume almost all of the CPU resources while bars update Microsoft constantly scanned my system for the latest upgrades necessary.

  Spending a day to try various fixes posted on the internet. A Microsoft Fixit said that he there had errors in the update and fixed all but one saying registration number was bad (said he couldn't fix that). Despite everything, still the same problem.

  On the same day, an error was unable to update the definitions of virus on MSE, but for some reason, the next day (14) updated crossed.

  Update: some progress: I leave svchost cogitate on the webpage update from Ms. After about 1/2 hour, the updated hotfix list showed. I tried to install it, but not updates managed to install. I am currently re - try, as suggested on the Web page.

  Also tried the command "net stop" method mentioned in several places, as a tool of Malewarebytes Anti-Root running. Nothing.

  Tried the fix for IE8 security as suggested, nothing.

  Tried system restore, but I must have something wrongly configured with it because it was not able to restore any earlier date, I took. Bad luck.

  Never had a big problem with my set-up in all the years I've been running XP sp3, until now.

  Next thing I'll try is Park on the side of Windows Update for an hour or two, with the idea that maybe my processor is in need of more time to digest something.

  I see that others have had this problem, but not necessarily with patch release on November 12.

  UPDATE: some progress, perhaps. 1/2 hour parked page update of Windows, with SVChost churning away, and I got a list of patches. I tried to install, but all of them failed to install. I try a re - install, as suggested.

  Let me propose a summary of how to fix the MSE / Windows Update problem and the svchost problem:

  1st thing to do is to disable the automatic updates window. This will keep your computer against svchost.exe freeze for now.

  2nd, follow the instructions in Xircal to check that you have "BITS" listed in your list of "services". Correct it if not.

  3rd, IE remove it from your list of programs, and then reinstall it, making your first update of the IE rollup, as suggested previously.

  That he "should" do and you can activate the automatic updates on svchost.exe should return to normal. Proceed with the update of Windows and MSE as usual.

• Windows Update re-offer KB2538242 after I installed it successfully

  I installed this update even 4 different times successfully and still it keeps giving. I have a problem with 5 other updates.

  Refer to this post that addresses a similar issue and follow the suggestion given by Kosh Vorlon - a regular contributor here.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/kb2538242-this-particular-update-is-installed/794fe18f-4F65-404A-8361-68c6d6ef6a22>

  `~`

  Launch a collateral request for assistance free Windows Update:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  `~`

  How to hide an update in Windows 7

  A. click the Start button, click principally made programs, and then click Windows Update.

  (B) in the left pane, click check for update.

  C. after receiving the results of the analysis, please click to see the available updates under the install updates button.

  D. Please right- click the update (KB2538242), and then click hide update.

  UTC/GMT is 01:18 Thursday, September 22, 2011