I see a "_" between the BIOS and the screens of multiple starts

Similar Questions

• Satellite P - grains of dust between the screen and before

  Hello.

  After a few weeks of suddenly, I have a speck of dust between the screen and front end.
  How can he get there and so I have to send in the laptop to the service?

  Greetings from the Germany and sorry for my bad English.

  Hello

  I think that it of difficult to say something about it, but I think that in this case, you can't do anything. The only chance is in touch with an authorized service provider because technicians can disassemble the laptop and check this box. If you disassemble the notebook you will lose you warranty so I n t this

  If you don't know where is the nearest ASP, you can search here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Simply contact the technicians. You will see that it s interesting to talk with them a little and they are friendly. ;)

• sony bravia kdl 40ex725 TV, I see double image in the screen of the same program and image

  sony bravia kdl 40ex725 TV, I see double image on the screen of the same program and that the distortion of the image

  Looks like a 3d picture? Side by side?

• Sony Xperia Tablet S has the space between the screen and back

  Hey,.

  I just discovered that the space between my front and back is! I checked out the site to see if it was one of the tablets known with the question, but it wasn't. Although he did not share the same problem as the Xperia which have been requested to return.

  Here are some pictures:

  http://i350.Photobucket.com/albums/q429/Silasje1/DSC_0082.jpg

  http://i350.Photobucket.com/albums/q429/Silasje1/DSC_0063.jpg

  http://i350.Photobucket.com/albums/q429/Silasje1/DSC_0085.jpg

  Really weird that it can be done!

  I checked here:

  http://www.Sony.nl/support/NL/product/SGPT121GB_S/news/Xperia_S_series_notice2

  But he said that my tablet was not part of the known :/

  I can put my nail enters the length of more than 13 cm

  
  

• Top of the Tower stopped working, no reboot. Stop after BIOS and black screen then

  Data;
  Computer HP Pavilion dv9000

  MS Vista operating system

  Process;

  When I start the computer, it stops after the session of the BIOS and just give me a black screen empty, with a marker in the upper left conner.

  As I have no recovery CD, I can't do anything (software installed when I bougth the PC without any CD included).

  I have a good software entering (and identification number is located on the computer), but I can't find anywhere to download on a recovery disc (CD)?

  Very frustrating!

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• can not see when out of the screen in the sunlight

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How to make it easier to see the screen in direct sunlight

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi nurselynn57,

  This link may be of use: http://www.mobilevehiclemounts.com/acc_pc_shade.htm in any case it was the kind of thing I thought to allow you to shield your screen. This link, of course, refers to laptops, if yours isn't a laptop it arte manufacturers that produce similar products for the desktop monitors.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• PiP of movement between the screens 'SX20.

  Hi guys,.

  I have a client with CTS-SX20-PHD4X-K9

  and TC6.0 who have 2 screen, customers want to move PiP between the 2 screens, but are not possible. Customer can move the pip on a single screen.

  I read some documents that this feature is more able with touchscreen. But maybe could im wrong, you please clarify this?

  Thank you

  Carlos

  Hello

  To know and according to Cisco documentation, end users can change PiP position using the touchscreen. Take a look at this extracted statement of administrator's Guide:

  

  In addition, if you read the "Guide of the user Panel of touch", Cisco clearly indicates that you can move the PiP using the touchscreen device. But if you read "The Remote Control User Guide", there is nothing related to the control of the PiP using the remote control.

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Questions: Create a new layer / switch between the screen Modes

  I spent the day to reset my workflow and keyboard shortcuts that I have the transition from CS5.5 on CC. A question about the ID:

  1. create a new layer draws up the InDesign menus? In CS5.5, I managed to create a shortcut customized in three programs (PS, I, ID). In cloud creative, no matter how hard I look in InDesign, that I can't find a place in the dialog box shortcuts keyboard to make a shortcut for this command.

  2 in Photoshop and Illustrator, by pressing the F button toggles between screen modes. In InDesign CS5.5, it does the same thing. However, CC does not seem to have this feature. He wants to assign three different shortcuts for Normal, overview and presentation of the screens. Correct, and is it possible to return to a toggle key 'F'?

  Thank you!

  Perhaps scriptable. Ask in the InDesign scripting

• How can I see my tasks on the screen

  I want to program a new event. I can do this, but I don't see on the screen with the calendar. Can anyone help.

  Thank you

  Russ Kent

  are you talking about on the track today?

• Where is the lock? I can't see it anywhere on the screen when you are connected to the https site

  Until I downloaded the latest version of Firefox, it appeared with icons in the bottom right of the screen. With Internet Explorer8, it appears on the right side of the address bar.

  The lock has been replaced by the site identity button, for details on use, see https://support.mozilla.com/kb/Site+Identity+Button

  If you want to add a padlock icon in the address bar, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/

• Screen freeze and black screen with multiple windows problems

  Hey all,.
  I have problems with the release of screen when you run multiple windows (Chrome, office etc. etc.). When I try to switch between the windows, I get a gel and I am unable to do anything.
  The cursor can be seen moving around the screen, but has no effect in all areas. The Windows key is not Sleep, nor can I tab into another program.
  If I try to start the Task Manager to see which program is the cause, it will not appear on the arrested image.
  Is there a way to tell, of an event log, this program is a failure?

  in windows 7: Start - Search event Wiever field - Windows logs

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• Restore the Image on the screen by default start from Lenovo

  Just got my thinkpad yoga repaired at a repair shop, and I noticed that the image of the bios screen and windows screen image splasp has been changed.

  Is it possible to restore the images the factory ones?

  Fixed by restoring the bios default settings.

• Setting the screen to get started on the applications rather than the Office of startup screen

  I have a HP Pavilion 23 and run Windows 8. Recently my pc has been commissioning on the desktop instead of starting up on the screen to start applications. How can I configure my pc so that when I turn on it goes to the start of applications screen and not desktop screen?

  Denver1003, welcome to the forum.

  You can go into control panel / taskbar and Navigation / Navigation / start screen / uncheck the first element ' when I connect or close all applications on a screen, go to desktop instead of the start.»  When it is disabled, the computer should start to the start of Metro (Apps) screen.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• My task manager he suddenly lost control bar at the top, you can not switch between the screens. What is happening and how to fix it?

  A couple of months back, my task manager, the opening showed 1 screen (no options for other screens on the tool and the control bar has lost.  Have tried everything (obviously not the right one) to fix it.

  Double click on the white strip at the top of the window.