I see my .nef being adjusted automatically when importing raw files

Similar Questions

• "Shrinking" when importing RAW files?

  I save RAW (CR2) files to a folder on my hard drive.  I then import/copy them to the catalogue (No. DNG conversion).  Most of the files are 18-20meg.  However, when I mouse over the image in the library, it shows that most of them like 15meg yet CR2.  What happens here?  I also don't create previews (yet), in most cases.  Also I use LR 5.5 on OS10.9.

  Yes, I need to learn how to store / organize photos more efficiently. In the meantime, I want to assure you that i've got full access to data for editing. After all, that's why I'm shooting in RAW.

  Can someone help me out here?

  Where you see the size of the file in the library?

  Are you confused Megapixels with Mo?

  The megapixels are determined by the width and the height of the sensors and data relatively constant for a particular configuration of brute, while the megabytes would vary based on the compressibility of the raw data and embedded preview JPG which are more compressible than if there are smooth areas and less noise due to the ISO settings, so the size of files themselves may vary considerably.

• Develop settings when importing RAW + jpeg

  When you import my D700 NEF files, I apply the sharpening preset landscape and I'm happy with the results.  However on my Fuji X 20 I import RAW + jpeg rather than just RAW, in this situation if I use the landscape sharpening sharpening preset is applied for JPEG and RAW format, leading to the already sharp in-camera jpeg being much more sharp.  If on the other hand I have not to use any to develop pr - game no sharpening or noise reduction is applied to the jpeg format and a minimal amount applied to the file RAW, more or less what I want but I want the sharpening of landscape higher applied to RAW files.  Is - this here anyway to change pre-sets frame so that they have only applied to RAW files when importing RAW + jpeg pairs?

  Dave Rosser

  In my view, the answer is no, you cannot apply a preset upon import, depending on the type of file.

  What you can do is after import you, filter on the Type of file and place it in JPG format and apply another preset that changes the sharpening of the filtered set of files, then go back and disable the filter and works with both sets of images you want.

  To filter by file Type, you must go to the library network, activate the filter with the backslash bar-key if necessary, then select metadata and change one of the columns existing filter to tell the Type of file or add a new column of file Type.

  Once you have created and applied the filter, you can save it as a preset filter that can be applied by the predefined filter selector to the very good and just above the strip of thumbnails at the bottom, same mode develop.

  You could do one for raw and jpg in case you want to swap between the two, and if you shoot jpg with more than one camera model, you can add the model of camera for the filter criteria.

• A slight color and quality shift when viewing RAW files for the first time in the library Module.

  Hello

  I've been shooting RAW for awhile and have notice that after I import the images and then begin to view in the library Module, I see a light color and quarter of quality - almost looks like a shift in the balance of whites, but not quite.   I thought that maybe there was some preset automatic applied but I do not have all of the presets.

  I'm shooting with a Canon 1DX and 7 d.  I have not checked to see if I get this situation with the 7 d, but I know for sure that I understand with the 1DX.

  Today I have passed through a few images in Bridge and decided to open one in Camera RAW.   At that point I found out that the Style of the images of the camera settings are available, faithful, Standard, Portrait, etc..  I noticed that the images did not camera styles applied to them, but rather the Style Standard Adobe have. At this time there in RAW I chose one of the styles of the camera and the bingo that's the kind of change that I see when I first discover an image in the library of LR4.

  So I can say that the RAW images are becoming the Adobe Standard style applied in LR.   I don't know if it's a default behavior of if I did something to make.  I think also that maybe LR not necessarily applies Styles of the camera automatically even if the particular style has been in the camera - is perhaps not imported as part of the metadata during import and so the default Adobe Standard.

  I guess what I need to know a few things and I hope that someone can educate the beginner!

  1 should I expect LR4 to apply the Style in the game of the camera automatically or not at all?

  2. can I prevent LR to apply the Adobe Standard Style and apply no style?

  3. can I cause some LR apply the Style as set out in the camera for the particular image to be appied automatically when importing?

  Thanks for any guidenace you can offer.  Of course if you need further information or clarification please let me know.

  Scott

  This sounds like what you see, Scott? Why the color or tone of my image changes after import?

  http://forums.Adobe.com/thread/358016

• YET CS6 - glued pine Wheel Mode when importing video files simple

  STILL, CS6 - glued pine Wheel Mode when importing video files simple. I'm having the exact same issues on my IMAC (end 2013) and my MacBook Pro (late 2009). I'm on day 2 of this. STILL worked very well last week and I was told no upgrade or modules from. Any help would be greatly appreciated.

  NM

  Adobe has NOT made the decision to stop the upgrade again... see #8 here because why http://forums.adobe.com/thread/1337952?tstart=0

  If you want to use again, you must have an operating system supported... and Mac 10.11.4 is not supported

• Horizontal lines on my screen when opening raw files in ACR

  Hello!

  I have a Macbook Pro to the end of 2013 with El Capitan installed 10.11.2 retina and all the latest updates for Adobe Photoshop CS6. I'm having problems when opening raw files in Adobe Camera Raw (ACR). I have lines of color on the screen when maximize/minimize the window cab. I've been in contact with Apple, but they couldn't find anything with the material, but my problem is still there. This could be a software related issue?

  I'd appreciate any help or advice as soon as possible.

  Thank you very much

  Kind regards

  David

  Hi David,

  It seems a problem with the graphics card on the computer, as the display is based on the graphics card drivers.

  I suggest you to please go to the Photoshop preferences, then the performance tab.

  Then please click on "Advanced settings", under the GPU settings and change the drawing in "Basic" mode

  Also uncheck the option for "Open GL/CL', restart Photoshop.

  and then open the images in Camera Raw and see if the lines still appear or not.

  Kind regards

  Tanuj

• When my raw files open in the original window in Ps, they are simply yellow, when I click on open a picture, they open up fine, but I miss the initial settings of type Lr. This happens to my raw files in Lr I used a Nikon 5300 and a Panasonic TZ

  When my raw files open in the original window in Ps, they are simply yellow, when I click on open a picture, they open up fine, but I miss the initial settings of type Lr. This happens to my raw files in Lr I used a Nikon 5300 and a Panasonic TZ60.

  Hi ericv,.

  For Photoshop (Camera raw): -.

  1 > Open Photoshop

  2 > click on Edit > Preferences > Camera Raw

  3 > please uncheck CPU graph using.

  

  4 > then click on OK.

  5 > restart Photoshop and check

  For Lightroom: -.

  Please go to preference > Performance > uncheck "use graphics processor.

  

  Let us know if that helps.

  Kind regards

  Assani

• How do you get custom default settings to enable lens profile corrections automatically when importing?

  I created default settings of serial number for my Canon Mark III 1ds include corrections of lens profile enabled.  Then, I created a user pre-configured with these corrections to default value.  Then I imported a folder of RAW images taken with the same camera Canon with the user checked under import profile.  When I switch to the module development and check the lens Corrections Panel, I see that even if it is verified for each file, the real model and profile are not met.

  Is this a bug or I forget something when you import?  I understand that in LR 4, you can apply specific profiles of lens and camera serial numbers camera calibration (too much noise reduction etc.).

  MacPro 2.8 Ghz Quad - Core Intel Xeon with 16 GB of ram running OS x 10.7.2.

  Thank you.  I chose to leave the ISO unchecked so that images you lens corrections automatically based on serial No.  I would be a nice feature, as well, to apply noise reduction to a specified user ISO target number, that is to say 1000 or more.

• How to make default PS6 when opening RAW files

  HI: I have a new computer. I put PS6 on it (got my number reg of Adobe a few years ago). So all my RAW files, JPEG files, are opened in PS6.

  Then I put the PS3 top (found the old drive and was able to activate my reg number). I did it because 3 has the extraction tool. So now I have 3 and 6.

  My problem is that now, when I double click on the RAW opening to 6 files that I get a little window that says "could not compete request because PS does not recognize this file type." So I guess he thinks I'm trying to open a RAW file in PS3, which I am not. If I right click I can open them in SP6 manually selecting PS6. But the thing is, when I just click SP6 is a top option and it says SP6 is the default value. And I can't open. So why can't open their clicking twice?

  I'd like to think that I just do PS6, the default value for the opening of the FIRST and all the files, but he says that he 6 is already the default. Then, maybe there is another way to make sure 6 is the default, so I don't have to manually open each file by right clicking?

  Thank you!

  Or uninstall cs3 and CS6 and install in the correct order.

  I discovered this when I installed CS2 on Windows 10 just to see if I could.

  It has the default value for files and I couldn't choose cc.

• GPS data deleted when editing RAW files

  I recently bought a GPS receiver for my Nikon D7100, what records latitude, longitude etc., who appears in the photo EXIF data.

  However, when I change the RAW file in Lightroom (around 4.4) and save the file changed in jpeg format, GPS data has been deleted and will not locate automatically when downloaded from sites like Flickr.

  Is there a way I can keep the GPS data on the processed image?

  Thank you

  Thank you... the box is unchecked.

  I think that I have found a workaround.

  If I save the RAW edited/processed as a .tiff file it seems to preserve the GPS data embedded in the EXIF data and thus can be auto-situé in Flickr

• Error when importing WSDL file created in JDeveloper inside BS

  Hi all
  
  I am faced error when importing WSDL service DBAdapter created using JDeveloper inside my business service at the OSB.
  The error in OSB is "the mapped resource does not exist.

  What version of OSB are you using? Please download the schema (.xsd) files as well. WSDL has references to this pattern, but they are not downloaded from where this error. On sbconsole, if you click on a WSDL name to see a button comes with the name of "references Edit." Click on which points to the xsd, you downloaded.

  Kind regards
  Anuj

• Mail crashes when importing MBOX files

  Mail crashes instantly when I select a MBOX file to be imported. In the brief moment before crashing it creates a folder to import and an MBOX, but the MBOX is empty.

  


  A few days ago I had a MBOX to import. It appears in the Library/Mail/V3/boxes to the letters/folder, then the MBOX container keeps messages from work. However, this MBOX does not appear in the sidebar.

  I went to a backup clone made shortly after the installation of El Capitan. I have replaced Mail and every file relating to mail that was in my user library. This leads to crashes instantly every time instead of intermittent partially blocks by an import.

  I made a secure boot boot. The problem remains.

  Reason 49 on why it is wrong to let the snow leopard. I wouldn't have moved to the Mail except that Outlook 2011 cannot search for emails or run unread simple as filters. (Recommendation from Microsoft is to buy Office 2016).

  Any ideas on how to fix the post other than to reinstall El Capitan?

  I have more information. I started in Snow Leopard and opened Mail 4.6. He had no problem importing the files MBOX to Outlook emails and attachments. I started to El Capitan. I deleted the folder/Library/Mail. I launched Mail 9.2. He created a new folder/Library/Mail that had obviously, no emails. I imported into the Mail 4.6 Mail folder. Everything imported perfectly. Yay! I then tested the capacity of 9.2 mail to import a MBOX to Outlook-created file small. Immediate crash.

  I hope that the problem was that Outlook 2011 on El Capitan generates corrupt MBOX files, but appears not to be the case. They looked good in BBEdit. Outlook had no difficulty to import.

• Hi, I just upgraded from 6.1 to 6.4 LR LR. When importing new files LR6.4 cannot rename my files with a specific date format (import uses only the original name).

  Hello

  No problem with the LR 6.1, but now (LR6.4), it seems impossible to rename my files with a specific format (yyyy-dd-hhmmss and a suffix) importing memory cards. LR imports only files with names of origin. And I have a lot of files to rename...

  I hope that someone knows what's going on.

  Jean

  Jean,

  We found a similar question which is being implemented. If you shoot images at once in the first and jpg format and then import them using the option of renaming, the question is in place.

  Could you please check if you use the option "make a second copy? If so, please it deselect. It should solve the problem.

  The issue is addressed in Lightroom.

  Thank you

  Sunil

• Error header when importing Wav files

  The problem I'm facing is that first CS6 will not import my audio Wav files. When I try to import It gives the following message and is unable to import the file:

  "Cannot open the file due to a header error".

  The original audio file, which opened with happiness in FCP 7 (I'm at first project since a previous Final Cut Pro project) is in the following (as described in the film Inspector of QuickTime Player) format:

  Linear PCM

  16-bit little endian signed integer

  2 channels

  48000 Hz

  Although the files will not open in first, they will open in Adobe Audition, which gives their 32 bit depth (it also describes the original as "16-bit little-endian" format - I admit that this technical aspect of audio files is clear to me).

  Any suggestions of how I can coax first in import and opening these files?

  Thank you, Andrew

  After the opening of the hearing, re - save out them.  This should fix any errors of header.

• Mac Mail will not create a file to import when importing .mbox files

  I've recently moved from an old Mac Pro (2008) a new (end of 2013). Both are running El Capitan (OSX 10.11.2) and the latest version of the mail (9.2). My old machine was old enough, so I skipped using Migration Assistant and performed a clean installation.

  I'm a graphic designer and, in the past, I always saved my emails into folders for each customer. When I finished work, I export it as a .mbox and check it in case I need to reference it later. If I need it later, I use "file > import mailboxes," select "import data since: Apple Mail," find the archived .mbox file and select it. " Mail lets know me that he has created a 'Import' folder, and there are my files.

  When I migrated to my new Mac Pro, I exported all my open work files, copied to a drive can be removed and added to the new machine. When I use the method "file > Import Mailboxes" I have just detailed, the import dialog box reads: "You can find boxes imported into the folder named 'Import' in the list of mailboxes mailbox." However, no 'Import' folder is created.

  I tried to leave Mail and reopening so to restart my Mac. I also tried to use "import data from: files in mbox.» In this case, I get a message that says: "error. No valid mbox file was found. »

  Here's the kicker: I created a new folder of email on my new Mac Pro, email at random from being dumped and exported it. When I re-imported, Mail created a new 'Import' folder, just as it is supposed to. It seems that the problem only affects files that I brought over my old camera.

  Any ideas I can try? I can still access my old Mac Pro if necessary.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.