I tried to install windows 7 themes for xp and when I restarted my computer it keeps on opening of session and disconnects me immediately.

Similar Questions

• I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  I have a PC with Vista, I tried to install Windows XP, it was rejected, and now I don't have an operating system

  Bruce,

  Do you remember if you wanted to do a new installation or had you partitioned your hard drive to install it in a dual boot with Vista?

  If you do not have a BONE now it sounds lik evous was the first choice that clears your current installation.

  You need to reinstall Vista from your original media to recover your system if this is the case.

  Unfortunately, if this is what you choose, you have lost all the data that was on your hard drive as well.

  Sorry to be the bearer of bad new possible.

  Rich

• I have windows me and I am trying to install windows xp on my drive and it will not be installed. How can I fix it?

  I have the disc for xp that I bought. It has been installed on this computer before. I had to restore the computer and now I can't reinstall xp from the disk.

  Hello

  ·         What is the exact error that you are experiencing when you try to install Windows XP on the system?

  ·         You have the full version of the Windows XP operating system or upgrade disk?

  ·         Are doing a clean installation of Windows XP or install an upgrade?

  Make sure that the XP CD is not damaged. If you have the upgrade disc you can not make a format installation. You can only switch to the older operating system to windows XP. I suggest you follow the steps mentioned in the article given below to install Windows XP on the system.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• Why Windows System 32\WinSAT.exe short when I restart my computer

  Whenever my computer restarts, the Windows System32\WinSAT.exe runs before I can get to my office. Is there a reason that this could happen?

  Hello

  For some reason, the program conducts tests on the Windows experience index assessment system.
  Start your computer in a clean boot and check if the problem persists.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step no: 7 the link above to reset the computer in normal mode.

• I get this error when you try to install windows live messeneger for windows xp: MICROSOFT ERROR REPORTING was unable to download.

  MICROSOFT ERROR REPORTING

  HR:0 X 80070641, I get this error when trying to install windows live messeneger for windows xp... any help please would be nice I have windows install 4.5 installed and it works fine. so it is not and I've tried everything I can think of any help please and thank you!

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any other help:

  http://windowslivehelp.com/product.aspx?ProductID=2

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Card high speed does not work after installing Windows Service Pack for Vista

  I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work.  The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.

  What can I do to get this corrected.

  John

  Assuming that the Vista SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• While trying to install windows xp on my computer, it displays the search for previous versions of windows and then locks the system.

  XP installation problem

  while trying to install windows xp on my computer (processor i3), she shows looking for previous versions of windows and then crashes the system. So please give me a solution

  Hi deva_reddy,

  Looks like you are trying to do a repair of windows xp installation.

  You use a windows installation cd?

  Refer to the link below for the procedure to install windows XP using different methods.

  http://support.Microsoft.com/kb/978307

  Hope the helpfu.

• new hard drive for laptop computer tried to install windows XP

  Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

  Hi JohnJelf,

  ·         What is the brand and model of the laptop?

  ·         What is the full error message?

  ·         The new hard drive detected in BIOS?

  I suggest you to contact the manufacturer of the laptop computer for more help and information.

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.

• my camera does not work. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have Thinkpad E420 Laptap. Syed

  Built-in camera does not work on my laptop Lenovo Thinkpad E420. Device Manager reports "found driver software for your device, but has encountered an error trying to install Windows" I have windows 8 Windows 7 upgrade.

  Appreciate your help. Thank you.

  Syed

  Hi Syed,

  Thanks for the reply with the status of the issue.

  I suggest you try to install the drivers for Windows 7 in compatibility mode and check if it works for you. I saw this troubleshooting procedure described working for other members of the community.

  Step 1: Download the driver for the Webcam from this link of Lenovo.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015018

  Step 2: Installing the driver in compatibility mode.

  Make the programs more compatible with this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• everything crashing when trying to install windows xp for a dual boot with preinstall windows 7

  I'm doing a dual boot with my preinstall windows 7, I'm done with partitioning already but when I try to reboot with my windows xp cd, just after he made all the check and talking about going to the installation of windows xp, it will crash and go to the Blue error screen. I was wondering how it will happen, so that I can install windows xp

  You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  Another option is to run your license of Windows XP in a virtual machine on Windows 7. I have http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html

• I am trying to install Windows XP and during the process, a message appears with the title "RUNDLL__Error in iesetup.dll Missing entry: IEAccessSysInst. The process then stops and I cannot make progress.

  I am trying to install Windows XP and during the process, a message appears with the title 'RUNDLL '.
  "Error in iesetup.dll Missing entry: IEAccessSysInst.  The process then stops and I cannot make progress.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with the third party burning software *-as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  * It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• I tried to install windows 7 and he shot his request now a windows key

  original title: Windows

  Is it possible to recover my windows vista? I tried to install windows 7 and he shot his request now a windows key. any suggestions?

  Is it possible to recover my windows vista? I tried to install windows 7 and he shot his request now a windows key. any suggestions?

  Hey BH32009

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Save all data, because it will be lost, do the above

  Walter, the time zone traveller

• I tried to install windows 7 on a latitude of E6230...

  When I tried to install windows 7 on a dell latitude, it could not configure windows 7 pro...

  I would appreciate any help on this as it is very annoying! Also, I'll try a new installation of windows 10 soon, will this instalation of windows work or there will be problems like windows 7 a pro?

  We understand. Will we know what is the error you get when you create a user account? When you say that it's not all still means that you are not able to go to the Office page? If you are able to go to the page desk and cannot create a user account, you can follow the steps below:

  1. Click the Start button. It is the small round button at the bottom left of your screen which has a Windows flag on it.
  2. Click on the Control Panel menu option.
  3. When Control Panel opens, you will see a screen similar to Figure 1 below.

  

  4. click on the option Add or remove user accounts Panel control as indicated by the red arrow in figure 1.

  5. you will now be in the control panel for managing the accounts as shown in Figure 2 below.

  

  This screen shows all of the accounts that are currently on your computer. To create a new account, click create a new account as indicated by the red arrow above.

  6. you will now be in the screen create a new account.

  

  In the new account name field, enter the name of the new account that you want to create. This could be a first name, last name, or any other name you want to give. You must then determine which of the two types of accounts you want to create. An administrator account has full access to the computer and can make any changes, install the software and create and delete accounts. The other type of account is a Standard user and has limited privileges as to what adjustments and changes, it can make to the computer. It is suggested that for all users, use you them as one user account Standard and have an administrator account that you can connect to the need. This will protect your computer from malware and other harmful activities.

  When you are finished selecting a name and the type of account you want the installation program, you must click on the create account button.

  7. your new account will be created and you will see that he listed in the account management screen.

  

  As you can see our new user called Test account, was created.

  Now when you start Windows 7, you'll see the extra account listed on the logon screen. This user can change their login name and connect their profile so they can access their private data.

  Brand of kindly as answer if this post responds to your request. Feel free to get back to us if you need further assistance.

  Thank you.