M6-1045dx

Similar Questions

• M6-1045dx: m6-1045 drivers

  I got my laptop and I was looking for the drivers for this model # m6-1045dx. When I go to the page of the driver he says no drivers avalible. I don't have any drivers graphics, usb, sound, wifi, network, ect... Can Antone help me find them?

  Drivers HP pages have major glitches in recent times. Here are a few that I caught before he wigged out on me. There is no audio driver at all - for now. I'll bring.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56944.exe

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56955.exe

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56947.exe

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56952.exe

• Ports usb 3.0 HP M6-1045dx for right side do not work

  I just changed the motherboard and the hard disk cable in my m6-1045dx and it seems to work without accident for now.

  Now, I can not USB 3.0 ports right to work. I plug anything on them and they don't work at all.

  Here's what I've tried so far:

  I tried to uninstall the drivers and reboot. The laptop and reinstalled the drivers but they did not

  I tried to install a driver wifi intel and who did not

  I tried to install the usb 3.0 intel chipset driver and who did not

  Help, please. I don't know where else to go. Thanks in advance

  Here's what I did.

  I took out the battery.

  I removed the large bottom panel.

  I removed the small panel for the wireless card see if I could see the two screws that connect the usb 3.0 ports and fortunately I did.

  I have check the tightness and the screws were really tight.

  I decided to unscrew the two screws and lifted the backend of the usb 3.0 a little Board. I then sprayed some CRC QD electronic filter on the contact areas.

  I put the two screws back in and tightened their top as much as possible without stripping or breaking the jury.

  I put the panels back on and put the battery back in.

  He started upward and to my surprise, the USB 3.0 ports worked perfectly.

  Until the problem of USB 3.0 port, the motherboard has been changed then maybe contacts to be cleaned. That's my guess.

  Pepe999, thanks for the replies. I appreciate it.

• Computer HP laptop 1045dx-M6 won't recognize hard drive

  I have a laptop HP M6-1045dx who has a problem with the recognition of the main hard drive. I tried several hard drives (one of them had windows 7 installed top for the laptop) and none of them are recognized by the laptop. I'll even in the verification of the HP hardware by pressing F2 and it did not recognize. When he did recognize, Windows 7 would freeze and then the blue screen of death. When I want to reactivate the laptop, the hard drive is no longer recognized. It would, in fact, the cable from the hard drive or is - what a card mother garbage? Help, please. Any help is greatly appreciated. Thank you very much.

  Looks like the motherboard, I'm sorry to say.

• HP Pavilion m6-1045dx: update the bios y dios UN error

  Update the bios y dio UN error desde the pagina driver busque bios desde php the instale y y is reinicio pc sola y is quedo pantalla negra pero el equipo lights are una portatil HP Pavilion m6-1045dx

  Ayuda than devo hacer para las dress bios?

  @David- 100

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• Model: m6-1045dx laptop, cp1525nw printer wireless

  Laptop: model: m6-1045dx B5S08UA #ABA

  Moving up to 15 years in router technology.  A router dual-band would work with both of these?   What I need to look for if I buy a new router fancy then try to connect with older hardware?  Even a WII?

  Know any information appreciated, not vague,

  Hello

  Yes, and you need to allow your router dual band to broadcast TWO bandwidths (2.4 GHz and 5 GHz).

  Kind regards.

• Unknown device on system compatible ACPI Microsoft to HP M6 1045DX after the installation of win 8.1 heavy

  On Device Manager in the computer management, it shows device unknown on system compatible ACPI Microsoft to HP M6 1045DX after installation win 8.1 heavy. hope someone can help me solve this problem

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=us&DLC=en&LC=en&OS=4158&product=5312254&sw_lang=

• Pavilion M6-1045dx: RAM Specs

  Hello, I need to replace the RAM in my 1045dx and need to record detailed.  The information available is 8 GB DDR3 SDRAM (2 DIMM) but when I RAM research buy, I need to know the frequency, voltage, etc.  Thank you.

  Hello

  DDR3 1600 MHz Non - ECC, 1.5 v, Unbuffered SODIMM memory

  Manual

  http://h10032.www1.HP.com/CTG/manual/c03328663.PDF

  http://www.kingston.com/en/memory/search/Default.aspx?DeviceType=3&Mfr=HEW&Line=Pavilion%20Notebook&Model=78974&Description=Kingston_System_Specific_Memory_for_HEW_Pavilion_Notebook_HP/Compaq_-_Pavilion_Notebook_m6-1045dx

  Concerning

• Pavilion 1045dx M6 cannot find drivers

  Because of a defective hard drive, I had to do a full install of Win7 Home Premium. Unfortunately, the USB drive I hade made earlier did not work, so I had to install a generic copy, without the specific drivers for my m6. 1045dx. I got the system upward and running, but there are a number of devices that I can not find drivers for. I installed all the drivers, I think I'd need for my system HP Web page for my laptop model, but Device Manager still shows a number of devices without the correct driver.

  One device (the video card) works a little, but appears as a generic VGA graphics card. The display on the screen of the laptop is fine, but I'm unable to use Aero effects or run the image to an external monitor, that I could do before.

  Uninstall or disable devices in Device Manager does not work. When I search for the hardware changes, he doesn't get the proper drivers.

  I found the hardware ID in the device for all the devices in question Manager. I'm not sure what some of the features are.

  Standard graphic VGA card:

  PCI\VEN_8086 & DEV_0166 & SUBSYS_18A4103C & REV_09

  PCI\VEN_8086 & DEV_0166 & SUBSYS_18A4103C

  PCI\VEN_8086 & DEV_0166 & CC_030000

  PCI\VEN_8086 & DEV_0166 & CC_0300

  hp_CDDVDW_TS-U633J:

  IDE\CdRomhp_CDDVDW_TS-U633J___HH01___

  IDE\hp_CDDVDW_TS-U633J___HH01___

  IDE\CdRomhp_CDDVDW_TS-U633J___

  hp_CDDVDW_TS-U633J___HH01___

  GenCdRom

  Bluetooth Device device:

  BTHENUM\ {00001132-0000-1000-8000-00805f9b34fb} _VID & 0001001d_PID & 1200

  BTHENUM\ {00001132-0000-1000-8000-00805f9b34fb} _LOCALMFG & 0002

  Ethernet controller:

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A4103C & REV_0A

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A4103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device:

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A4103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A4103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  Unknown device #1:

  ACPI\HPQ0004

  * HPQ0004

  Unknown device #2:

  ACPI\INT33A0

  * INT33A0

  Can someone point me in the direction of the correct drivers?

  See if this driver intel graphics work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106596-1&cc=us&DLC=en&LC=en&OS=4063&product=5273547&sw_lang=

  For the DVD drive, run each of the troubleshooting steps, 2, 3, 4 and 5 from the link below. One of them should solve the problem.

  http://support.Microsoft.com/kb/314060

  Unfortunately, I won't be able to help you with the periperal of bluetooth device because now that you have installed the bluetooth driver, it should have been without problems.

• M6-1045dx Pavilion: fingerprints for windows 8.1 driver

  I have notebook m6-1045dx Pavilion. I upgraded my windows 7 to 8.1 windows but now I'm not able to use fingerprints to connect.

  Pc settings in the sign in option disable adding by fingerprint is disabled.

  I have validity sensors (WBF) (PID = 0018) driver and HP pass simple version 6 of 2011.

  Discovered myself. It was the update of a driver from this site.

• m6-1045dx Pavilion: HHD compatible

  Hello, I have a m6-1045dx pavilion. My HHD is no longer operational. I would like to know if I can buy a SATA III instead of the stock SATA HHD version?

  Thank you

  Yes, SATA - III is backward compatible. A new portable SATA-III HDD works in any laptop computer that supports a SATA drive, assuming that the thickness is compatible (9.5 mm or 7 mm)

• cannot install windows 7 on my hp m6 1045dx

  A year ago, I bought a hp m6 1045dx. Windows 7 Home premium installed on it. It has worked well. But then a few days back I decided to creat new left and reinstall the windows.i created the partition with tools intended.
  Then I formatted my C drive containing the window7 on it installed and tried to reinstall it on a bootable dvd. Installation went well until the system is restarted, and the finalisation begins it gives an error "windows can not be configured to operate on hardware on this computer.
  I tried to format my hard drive completely, but still, I am facing this problem. Please can someone help me?
  Thank you

  Hello:

  Try this:

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts, and I hope that will install W7.

• want 1045dx m6: Simplepass works do not with my laptop

  My first post so maybe wrong category, try to scan fingerprint to install it on my system and send me questions. Firstly, through windows Hello, he asked me to slide my finger, after the first shot, the scanner shows the orangelight then says something went wrong and I have to restart Hello windows.
  
  Then try to use HP simple pass, it stops right in the screen where it says slip a finger between the player and there is a big x and please do sliding your finger across the reader amd it's everything... regardless of how drag, no light, nothing. Please can someone help me, my arw pilots all updates

  @Johnxy84

  Johnxy84 wrote:
  Hello, thanks for the reply, downloaded the drivers but How to configure the fingerprint sign upother than to go through Hello windows?

  Short answer:

  You configure connection of the fingerprint without after crossing the Windows Hello > PIN > enable fingerprint.

  The fingerprint reader must be activated before it can be used.

  Windows 10 fingerprint logon is considered "Primary" - in most cases, it is necessary to implement the login Windows 10 fingerprints before moving on to other programs / additional fingerprints.

  Longer answer:

  I don't know the answer to your situation.

  In general, everything works much better when you have installed the drivers needed for Windows 10 HP.  Your system drivers Support page provides 10 HP Windows drivers.

  In general, it is necessary that you configure and activate the reader of fingerprints and footprints digital connect within 10 Windows before installing HP SimplePass.

  • Install the print driver provided in the previous post
  • Restart the computer and log in
  • Create the number of PINS and allow the fingerprint reader

  See:

  Add or remove fingerprints - 10 Windows logon

  

  Comment

  In general, after the login Windows 10 fingerprints digital works, and then you install HP SimplePass.

  The repeated use of the words "In general" is deliberate.

  Without the HP infrastructue which would be normally offered by the Drivers HP for Windows 10 installation, initial configuration of fingerprints is entirely dependent on the structure of the operating system of Windows 10 files.  It's not ideal.

  In other words, things cannot proceed as you expect.

  To make it more complicated, if Setup the initial connection of fingerprints is not working, then - to try to get the job of fingerprinting connection - you may need to install HP SimplePass before login footprint is functional.

  Installation HP SimplePass before the login of the fingerprint is functional is not ideal:

  • Start the program SimplePass in the mixture can work (fix) - or to install SimplePass atop of a connection configuration nonfunctional fingerprints may not help at all

  If you install HP SimplePass fails:

  • Installation HP SimplePass before the login of the fingerprint is functional can cause the user (you) to believe that the failure is due to HP SimplePass (when the cause of the failure is located somewhere else).

  

  The question is perhaps the absence of a footprint of Validity Sensor Driver Update.

  If you wish, try / use a different driver.  Although not specifically recommended for your system, the type of device is the same and the proposed driver supports a wide variety of systems / equipment.

  DOWNLOAD:

  sp58900 validity sensor V4.4.234.0 W8 - W8.1

  • Uninstall AND remove the existing of fingerprints fingerprint driver in Device Manager
  • Shut down the system (full off)
  • Start the computer and connect
  • AThe install downloaded Driver
  • Restart the computer and log in
  • Check for the difference.

  Relevant measures are set out in the DocumentSection:

  • Order of events

  Good luck.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• beats automatic m6-1045dx

  I restored my laptop to m6 and I can't find the soft ware of beats auto can help

  That's thanks a lot.

• Pavilion M6-1045dx: HP Pavilion M6 does not start

  My computer does not start.  Screen is dark, even if I hear a fan.  When I tried to start, it turns on and turns off after a few seconds.  I removed the battery and the power turns on but does not start.  I tried a hard reset, nothing helps.  I also eliminated a fo the two strips of RAM and tried to start with each of the two, but this doesn't work anymore.

  I had installed a Samsung SSD a year ago and everything worked fine.  Last night, I reinstalled the rotation of the original hard disk supplied with the computer and the computer booted.  I reinstalled the SSD and everything worked like new.  In other words, until this morning.  same symptoms.

  How to diagnose and fix?

  I forgot to mention that after I installed the original hard disk, the bios updated and the computer worked fine until this morning.

  Caps lock key seems to blink twice, but the model is difficult to discern.

  Hello @Dakest,

  Thanks for the quick response!

  Please see the following documents and let me know how it goes:

  HP computers - HP BIOS selected Application is damaged or missing

  HP Notebook PC - restore BIOS

  If you're still having problems, then you can consider replacing the CMOS battery, to see if this solves the problem for you.

  I hope this helps.

  Have a great weekend!